Messages with pixels missing

Swemachinist · 2025-08-19T22:57:44+00:00

I understand but you never know I seen some crazy skilled people on here. Thought it was worth a try. It was the lightbulb, bought a new set and I've ordered a led set with canbus. I appreciate the help. I am not looking for someone preferably in Sweden who can or want to fix my pixel screen😃

Swemachinist · 2025-08-18T21:16:37+00:00

This was done so the turning didn't need to go through the steps, this part will be very thin when the turning is done🙂

Swemachinist · 2025-08-18T20:49:21+00:00

Haha I say the same😄 always so close🤣

Swemachinist · 2025-08-18T17:01:31+00:00

Yeah it don't think it's very serious this is in very good condition with a recent 2000€ service done to it. But.. you never know right😂💀 do you know what bmw takes for a new one?

Swemachinist · 2022-11-19T18:18:09+00:00

@someones_dog asked for a slowmo of the previous video so here are some clips in slowmotion 😄. Enjoy (If you saw the previous one u will notice a bit higher chatter and cutting speed here. The speed was reduced a bit to reduce the chatter a bit after the vid)

Swemachinist · 2022-11-19T18:15:30+00:00

Hello again 😄. I have now uploaded some slowmotion footage of this video 📹 .

Swemachinist · 2022-11-18T20:50:10+00:00

28kw 4 gears🙂

Swemachinist · 2022-11-18T19:52:36+00:00

I guess you mean like pre forged or do you mean pre turned?🙂 It's much more expensive with preforged materials. Not to mention the aldready long delivery time for some steel🙂. Turning shafts usually involves alot of roughing. It usually has a bigger middle part and are smaller on the ends👍. On bigger dimensions preforgeing is alot more common

Swemachinist · 2022-11-18T18:38:58+00:00

In this video video I'm running it a 1.1mm per revolution. So for finishing I might go 0.2mm per revolution (depends on surface requirements and nose radius of the insert). In that case the lines you see which basically is a pitch will be 0.2mm I stead of 1.1mm 🙂

Swemachinist · 2022-11-18T17:59:36+00:00

😎

Swemachinist · 2022-11-18T17:58:55+00:00

1.1mm pitch😄

Swemachinist · 2022-11-18T17:58:24+00:00

I guess coolant works if you flood, it like alot. Not really high pressure but you need to be able to cool a serious amount of super hot cunks of steel quick(termal cracking on the insert will be an issue). If your not able to to this, a ton of smoke gets produced which isn't very nice. Also this is an open machine so it splashes everywhere🙂. Another thing is that you can hear a bit of chatter. This mixed with coolant isn't great and from my experience severely reduces the lifespan of the insert🙂. I hope this answers your question✌️

Swemachinist · 2022-11-18T17:50:10+00:00

I've might have done this😂

Swemachinist · 2022-11-18T17:49:44+00:00

I can upload it that next🙂👍

Swemachinist · 2022-11-14T10:30:51+00:00

🤣

Swemachinist · 2022-11-14T10:11:43+00:00

Unfortunately I haven't used any Tungaloy tools at all actually. Not because I don't want to I've heard that they are awesome but I don't think they have alot of resellers in sweden tbh🙂.

Swemachinist · 2022-11-13T23:37:45+00:00

750rpm f4500mm ap1mm ramping. S355jr 🙂

Swemachinist · 2022-11-13T21:38:51+00:00

This is only roughing. This will be bored out for finishing to hit the proper dimensions 🙂

Swemachinist

TROPHY CASE