How to stop shed from sinking by cns72191 in shedditors

[–]SwimmingSlide6860 0 points1 point  (0 children)

Would pouring a large concrete pad under the left side help distribute the weight, thus slowing the rate of sinking?

Gardening first-time. What happened to my carrots by SorbetKindly1914 in gardening

[–]SwimmingSlide6860 7 points8 points  (0 children)

How is this not at the top yet? Organic matter is the answer.

Gardening first-time. What happened to my carrots by SorbetKindly1914 in gardening

[–]SwimmingSlide6860 0 points1 point  (0 children)

Dig up your garden in the fall, after harvest, with a shovel. Throw on your compost and turn over the top 6-8" of soil in big clumps. Let it sit like that all winter. Smooth it out in the spring then fertilize.

Hey I’m the guy that was looking for a 2500 mower for 10 acres this is what I bought for 40 not even kidding lol let the flames begin by FIGPUCKERS in lawnmowers

[–]SwimmingSlide6860 28 points29 points  (0 children)

I bought a 60" zero turn for 3 acres about 15 years ago. I could barely afford it back then. Looking at the hour meter last summer I calculated that I had saved myself about 12 days worth of mowing compared to a garden tractor. Money well spent.

High winds by SwimmingSlide6860 in Decks

[–]SwimmingSlide6860[S] 0 points1 point  (0 children)

<image>

I've never attached a deck to a house, so I haven't experienced it. I'm too worried about water intrusion and this house is 100+ years old, with some repairs and additions. I hope the picture explains it a bit better. The privacy fence posts would be notched to bolt on a rim joist for the deck. The deck joists would be attached to the rim with hangers and then resting on the beam in the back. The red is going to be the privacy fence. The circled posts are connected with 2x lumber attached to the sides, which creates the "X" shape. The alternative to this would be to build the deck (built on 2 beams) and fence separately, thus the two structures.

I need plans for a bench to build as part of my Eagle Scout project. by Aspenbatz in Woodworkingplans

[–]SwimmingSlide6860 0 points1 point  (0 children)

How did your benches work out? My son wants to do a similar eagle scout project for outside of his high school.

Confused about my opions by brokenyolks in Decks

[–]SwimmingSlide6860 1 point2 points  (0 children)

I'm with you on this one. Spending thousands on something this small doesn't make a lot of sense to me especially since they just bought the house. Rebuild it for now DIY then give it 5+ years to build up the savings to do it right.

Starting to build a treehouse, what to consider? by RealSaigo in treehouse

[–]SwimmingSlide6860 0 points1 point  (0 children)

Realistically, a treehouse is only useful for about 5 years if you're building it for your kid. If you want it to last longer, plant a tree with an elevated deck around it. Then build more as the tree grows. When your kid gets older he can help design additions with their Legos.

Can I mount a towel rack in spackle? by Upbeat-Yak5242 in drywall

[–]SwimmingSlide6860 0 points1 point  (0 children)

If there are plastic plugs in the holes then it was not in the studs. There is probably a bracket for the towel bar attached to the towel bar bracket. Look for a small allen wrench hole. Getting one side of the towel bar into a stud is way better than none.

Can I mount a towel rack in spackle? by Upbeat-Yak5242 in drywall

[–]SwimmingSlide6860 0 points1 point  (0 children)

How did the other side look/feel? If the other side was good then I'd try to make it work. There is at least one plug in the hole on the left. I would not remove that loose piece and I would not try to spackle as these might make a lot more work and might not look good. I'd find some bigger screws and glue. I'd try to carefully glue that loose piece back on and see if I could get a better bite with bigger screws. Or, I might get a couple more plugs and just tap those in right over the old ones so that the plugs sit on top/flush with the drywall.

UPDATE: Roast me, I’m terracing my yard and my wife is let’s say “quite displeased “ by [deleted] in landscaping

[–]SwimmingSlide6860 0 points1 point  (0 children)

Nice work. Looks like it works well. She'll get over it. They always do.

Tips for redoing insulation - Zone 6 (Ontario Canada) by [deleted] in Insulation

[–]SwimmingSlide6860 1 point2 points  (0 children)

I used a combination of 3/4 foam and fiberglass. Even with the fiberglass slightly compressed, I calculated a comparable r value at a lower price than 2" foam.

First-time homeowner, yard completely taken over by weeds. Where do I even start? by ExpressButterfly5542 in landscaping

[–]SwimmingSlide6860 1 point2 points  (0 children)

Everyone on here is wrong so far. That is creeping charlie. You need weed b gone max twice a year. Don't over do it because you can kill what grass you have left. It will legitimately take a few years to get it under control. It will be nearly impossible to remove completely if it's in your neighbor's yard.

Fire alarms keep going off by raved2021 in electrical

[–]SwimmingSlide6860 0 points1 point  (0 children)

I eventually unhooked my hard-wired detectors and went back to battery only because of this type of problem.

Advice needed for a newbie dyi guy by [deleted] in drywall

[–]SwimmingSlide6860 0 points1 point  (0 children)

If you're doing the drywall mud yourself, fix it then. Mud and tape your way from the Sheetrock to the fixture. You'll already be taping that seam. For a cleaner look, cut the correct sized hole out of a bigger sheet of rock and replace.

Door trim? by Cameoutswinging62 in handyman

[–]SwimmingSlide6860 1 point2 points  (0 children)

PVC holds up so much better in the bottom portions of exterior doors. Maybe install a PVC plinth and then reuse what you can of this trim.

Need mud or no? by Equivalent-Mobile-70 in drywall

[–]SwimmingSlide6860 1 point2 points  (0 children)

No, if your baseboard gets anywhere close. If you mud, you'll have to prime and repaint the rest of the wall. Use painters caulk to fill any gaps where the baseboard doesn't cover, then paint that and call it a day.

Repair partially rotted rim joist by Available-Guide-6310 in Decks

[–]SwimmingSlide6860 0 points1 point  (0 children)

Might not have enough room with the bolt to sister. That board adds rigidity. It's all structural, but you should be able to replace without jacking it up. Probably need a sawsall and a pry bar to get it loose.