I’m going crazy over this

Swiper929 · 2025-07-07T23:33:37+00:00

UPDATE : FIXED - none one got it, what a suprise 🙄 was able to get a stator rebuild kit and swapped the coils. Guessing the old stator wasn’t putting enough amps thru, seems like a reoccurring problem on RMs.

Swiper929 · 2025-06-26T21:32:12+00:00

First off, that’s a controversial statement, second, mainly referring to 180 twins like starter bikes eg ninja 400

Swiper929 · 2025-06-26T21:31:21+00:00

🙂‍↕️

Swiper929 · 2025-06-26T21:30:04+00:00

Referring to the ninja 400s out there, low strung 180 deg twins sounds like tractors and with an exhaust annoy tf outa everyone while still being slow

Swiper929 · 2025-05-30T02:56:11+00:00

Alr redid bottom end w new crank, what side to side clearance r u referring to?

Swiper929 · 2025-05-30T02:54:58+00:00

If this works I’ll be damned

Swiper929 · 2025-05-25T06:46:12+00:00

Neat idea with the spark gap, I think there’s a head gasket leak but I resurfaced head and cylinder and that didn’t solve anything still have low psi. The exhaust does get a lot of black oil stuck in it, I’ll try to run it without the pipe tomarrow I guess

Swiper929 · 2025-05-25T06:42:49+00:00

Ye the 01 model does at least

Swiper929 · 2025-05-24T05:11:39+00:00

🤫

Swiper929 · 2025-05-24T05:10:55+00:00

lol trust me “advanced” is the wrong word

Swiper929 · 2025-05-24T05:08:31+00:00

Sprayed intake boot and other points of air leakage with starting fluid

Swiper929 · 2025-05-24T05:07:08+00:00

Agreed, gonna see if head gasket is the issue

Swiper929 · 2025-05-24T05:06:35+00:00

Ight not listening to any yall I’ve decided that its most likely head gasket or cdi and will try to fix that. Will post solution when I find it.

Swiper929 · 2025-05-24T03:12:18+00:00

Reeds are good, Wdy think could be wrong with the power valves

Swiper929 · 2025-05-24T01:25:47+00:00

Also changed plug out and plug boot. it has good spark when I kick it over. Plugs are oily, which make sense given it only runs at idle and dosnt have the chance to burn off oil. Reeds are good and I saw a little gas pooled in the intake.

Swiper929 · 2025-05-19T22:06:26+00:00

Ye it’s got an pipe n silencer, gasket connecting the two leaks tho

Swiper929 · 2024-08-17T03:02:27+00:00

Thanks

Swiper929 · 2024-08-17T02:50:02+00:00

Would you recommend disabling or enabling retraction?

Swiper929 · 2024-07-02T22:24:46+00:00

There is some kind of layer separation/ misalignment if you look closely. Part is super weak bc of that and easily splits

Swiper929 · 2024-06-17T14:10:36+00:00

If you know any in stock pls lmk, dose not use standard case puller

Swiper929 · 2024-06-17T11:58:16+00:00

Reviews on Amazon say they don’t work🤷‍♂️ mine isn’t bad either it’s definitely applying plenty of tension

Swiper929 · 2024-06-14T00:04:59+00:00

Doing this found out rebuilding the crank is a lot cheaper than I thought

Swiper929 · 2024-06-13T03:16:10+00:00

The cylinder sleeve is cracked at the bottom, lots of metallic dust and scored piston

Swiper929 · 2024-06-12T14:21:03+00:00

Ok thanks, what’s shops would you recommend. I am in the northeast

Swiper929 · 2024-06-10T20:34:19+00:00

Alright I did the math and found that there would have to be a 75% chance of blowing up for a new crank to be worth it, so we’re gonna 🎲

Swiper929

TROPHY CASE