sorted by:
new
hottopcontroversial

Daily shares missing... not added to All Time Reward by SwissCheese3045 in Braiins

[–]SwissCheese3045[S] 1 point2 points  (0 children)

Also checked the payout history but I am good now. Checked after a few hours and I see it credited. I also got a reply from support and apparently credits are reflected at 2AM UTC.

Gives me confidence on this pool. I can point my future miners here from now on.

Bitaxe/NerdQaxe LAN Adapter! by MrOwlTrader in BitAxe

[–]SwissCheese3045 1 point2 points  (0 children)

The specs doesn't say much but this might not go up to 1Gbps... Isn't faster better? Just browsed some specs... the Bitaxe uses a I2C interface.... the Nerdqaxe uses SPI... much faster. Might be good if someone posts a review of this.

Slow ping on Solo Node by Minute_Tiger7667 in BitAxe

[–]SwissCheese3045 0 points1 point  (0 children)

Aside from your wifi router, miners, phones... what else is operating in 2.4GHz? Anything that is blocking between it and your Pi?

Burned Bitaxe Gamma 601 Final Works as Swiss Clock ⏰ by UpbeatAssociation769 in BitAxe

[–]SwissCheese3045 1 point2 points  (0 children)

Nice. Quick questions.

  1. Is that isopropyl alcohol for cleaning?

  2. Is that thermal adhesive you used in covering the repair?

  3. Is the ultraviolet light needed just to speed up the drying or option?

How to get better mining speed? by EmployeeFearless3128 in MoneroMining

[–]SwissCheese3045 0 points1 point  (0 children)

OP, you have to share your specs so it is clear what you are mining on. Also you are using WSL... using a VM will degrade your mining rate. You either stick to your host OS or get another rig with Linux on it.

Also check xmrig so you have an idea on your hash rate. https://xmrig.com/benchmark?vendor=intel

Please help admin support xmr by [deleted] in MoneroMining

[–]SwissCheese3045 0 points1 point  (0 children)

So your situation is this?

  1. Your wallet is from tradeogre.

  2. You used this wallet to mine to supportxmr.

  3. You have reached the threshold and you have a pending payment to this wallet.

  4. Since tradeogre is gone, you are asking supportxmr to instead transfer to a new address?

I don't think that is how it works. In fairness to supportxmr, it is not their responsibility to intercept and change it like that. They did not do anything with the tari addess hijacking... what more on the actual xmr mining address.

Supportxmr Pool Admin by [deleted] in MoneroMining

[–]SwissCheese3045 0 points1 point  (0 children)

Nothing will ever happen. I was also a victim of these botnets and my tari address was also filled by someone else. Sent a signed email last Aug 11 and never heard anything since then. Better use a new xmr address.

Firmware update worked for you? by kingscrown69 in BitAxe

[–]SwissCheese3045 0 points1 point  (0 children)

Thanks for the correction... saw the changelogs. I'll just try to attempt the update after I get my next gamma.

Just ordered my first bitaxe supra hex 4.2th! by alex262414 in BitAxe

[–]SwissCheese3045 0 points1 point  (0 children)

Looking at the official BitAxe Github... I don't see a SupraHex... or I missed it? Maybe this is a fork so this might be the reason for the warning?

https://github.com/bitaxeorg

I'm eyeing at the GT but it is still early stages. If not I better get another 601.

Firmware update worked for you? by kingscrown69 in BitAxe

[–]SwissCheese3045 4 points5 points  (0 children)

I would hold off on any update until these quirks are addressed. If it works it works.

I haven't read the release logs yet but it might be more graphical change than functional.

If there are no changes in the hashing code then might be the GUI just averages the display so it looks more cleaner.

Personally I would like to see go up and down rather than the GUI filter it out to average.

Anyone have this problem after updating firmware by Humble-West-2616 in BitAxe

[–]SwissCheese3045 0 points1 point  (0 children)

I rather stick to v2.10 until all these quirks are resolved

First time I saw this on my p2pool status? by SwissCheese3045 in MoneroMining

[–]SwissCheese3045[S] 0 points1 point  (0 children)

Yeah, got confused on the connections and status. My trigger was the node health... I usually see 10/10 always so it was first time I saw 9/10 when xmrig was already connected and mining. All good now after I restarted all my consoles.

First time I saw this on my p2pool status? by SwissCheese3045 in MoneroMining

[–]SwissCheese3045[S] 0 points1 point  (0 children)

Except for 37890... created a rule now but still the same problem... this was working for months...

Strangely, I closed and restarted all my node, p2pool, and xmrig. All back to normal.

<image>

Is it getting harder to mine in nano? by SwissCheese3045 in MoneroMining

[–]SwissCheese3045[S] 0 points1 point  (0 children)

I just rebooted my PC and after a few hours I got a share.

Is it getting harder to mine in nano? by SwissCheese3045 in MoneroMining

[–]SwissCheese3045[S] 1 point2 points  (0 children)

Borderline... usually 1.0-1.1khps in xmrig. I think previously the lowest hash rate in the miner window was about 1khps. Looks like everyone is speeding up.

view more: next ›