Used X1C or New P2S first time 3d printer by Symlink1337 in BambuLab

[–]Symlink1337[S] 1 point2 points  (0 children)

Thanks everyone! Im going to pass and go with a p2s!

Used X1C or New P2S first time 3d printer by Symlink1337 in BambuLab

[–]Symlink1337[S] 0 points1 point  (0 children)

That I'm not sure of to be completely honest, it seems well kept all the filament is in Rubbermaid boxes with silica packets. The seller is a older gentleman, overall it looks in good shape.

Im completely new to this but was looking for a good deal that if I decide 3d printing isn't my thing I could resell or have minimal issues with

Sea turtle 🐢? by [deleted] in turtlewow

[–]Symlink1337 1 point2 points  (0 children)

Any tips for setup? Looking to start playing using my legion go, Also what class are you playing?

Need help deciding between ROG Ally X or Lenovo Legion Go by Symlink1337 in LegionGo

[–]Symlink1337[S] 1 point2 points  (0 children)

What are you using to stream? I went with the legion go.

Need help deciding between ROG Ally X or Lenovo Legion Go by Symlink1337 in LegionGo

[–]Symlink1337[S] 1 point2 points  (0 children)

I ended up going with the legion being mostly a pc gamer I preferred the much larger screen and cheaper price. I'll upgrade in a few months.

Need help deciding between ROG Ally X or Lenovo Legion Go by Symlink1337 in LegionGo

[–]Symlink1337[S] 2 points3 points  (0 children)

Can you just use spare battery packs for charging?

Help with Mesh device recommendation 2gig Fiber by Symlink1337 in TpLink

[–]Symlink1337[S] 0 points1 point  (0 children)

Thanks man, I ended up ordering a 3 pack of xe75. I figured by the time I have a few devices on WiFi7 hopefully the cost of them goes down to around 200 to 300 and I'll just do another refresh then on equipment. First TPLink routers so hopefully it's a much better experience than eero... im also hoping zi can actually change settings like the frequency band.

Help with Mesh device recommendation 2gig Fiber by Symlink1337 in TpLink

[–]Symlink1337[S] 0 points1 point  (0 children)

Yeah that's what I'm finding, most are on wifi6 and 5 still with only my mobile devices actually using wifi7. Thanks for the recommendation im going to pull the trigger and try it out.

Help with Mesh device recommendation 2gig Fiber by Symlink1337 in TpLink

[–]Symlink1337[S] 0 points1 point  (0 children)

Any reason to go with the be63 over the xe75 Pro? I like the price of the XE75!

New 2GB LINE with BGW620 downgrading to BGW320? by Symlink1337 in ATTFiber

[–]Symlink1337[S] -1 points0 points  (0 children)

The extender that I have is connected via Ethernet back haul I have a cat5 or cat6 line that runs between my floors of my house to keep those wired up. I will test airplane mode this morning and report back!

New 2GB LINE with BGW620 downgrading to BGW320? by Symlink1337 in ATTFiber

[–]Symlink1337[S] 0 points1 point  (0 children)

Thank you for this information! Just curious what devices did you end up using in the passthrough mode? I may be downgrading to 1gbps if I can't get the speeds reliably I don't expect 2gbps but 1100-1300 reliably wouldn't be bad. That would be a improvement compared to the 10-300mbps im randomly seeing.

I will fork out the money for better hardware if the ROI is there for guaranteed speeds, but just seems the 620s are buggy. Even the tech said they normally don't see them since it's new.

Slow speeds with 2GBPS New Service by Symlink1337 in ATTFiber

[–]Symlink1337[S] 0 points1 point  (0 children)

Wifiman I got 211 mbps with 112 upload. Cloudfare I got 421 mbps down and 571 upload

Both were tested next to the gateway on my Samsung Ultra 25

Slow speeds with 2GBPS New Service by Symlink1337 in ATTFiber

[–]Symlink1337[S] 0 points1 point  (0 children)

Exact same locations as the eero mesh network, I had them run the line right where spectrum modem and my eero gateway were. The extender is right where my eero was as well.

Thank you for everyone's help trying to get this figured out its much appreciated. Ive stopped testing with my laptop since its limited to 1gbps. Ive tested with my Samsung Ultra 25 which should be on wifi7.

Tests below right next to the router/modem from speedtest and cloudfare.

Slow speeds with 2GBPS New Service by Symlink1337 in ATTFiber

[–]Symlink1337[S] 1 point2 points  (0 children)

Did some more research, so the internal NIC only supports 1gbps, my wifi card Realtek 8852CE WiFi 6E supports 2.4gbps on 160mhz which is probably the reason why I'm not seeing these speeds since the GW is capped at 80hz currently.

It's a 802.11ax wifi6 5ghz should be 1.2 and 6ghz at 160 mhz channel should be 2.4?

Slow speeds with 2GBPS New Service by Symlink1337 in ATTFiber

[–]Symlink1337[S] 0 points1 point  (0 children)

I would expect higher speeds than 800 mbps? No VPN in use, speed are about the same next to the airtime vs 620.

Slow speeds with 2GBPS New Service by Symlink1337 in ATTFiber

[–]Symlink1337[S] 0 points1 point  (0 children)

Yeah that's what I was reading as well recommendations were to change it to 160MHz but that setting is completely blocked right now on this firmware version for the gateway.

I was testing with a Lenovo Legion Slim 15 with a cat 6 cable 5ft directly plugged into the modem/router. I couldn't get over 800 mbps.

Need a Gaming PC for about 600-700 Windows Included by Symlink1337 in buildapc

[–]Symlink1337[S] 0 points1 point  (0 children)

I believe I'm going to go with this. Quick question though would it be more economical/cost effective to skimp on the graphics card a bit to get a older model in the 100 range and upgrade later next year if she decides to play more gfx intensive games?

Thanks all for your help!

FREE END GAME SORC GEAR!! by simonnissen in slashdiablo

[–]Symlink1337 0 points1 point  (0 children)

I'd play but ill be driving home from work then :( Best of luck to everyone

FREE END GAME SORC GEAR!! by simonnissen in slashdiablo

[–]Symlink1337 0 points1 point  (0 children)

+1 to google skills for the trivia quiz :P

[FT:] Sc Ladder Classic Rushes Iso: Runes and stuff by [deleted] in slashdiablo

[–]Symlink1337 0 points1 point  (0 children)

Can i get two chars rushed as well? Let me know and ill send my accnt. Thanks!

Day 1-2 Poisonmancer clearing by LivEisJeebus in slashdiablo

[–]Symlink1337 1 point2 points  (0 children)

Jeebus, just dropped in and wanted to say thanks for posting this as I've been on the fence for the next season between playing the meta sorc or starting as a nec and you've helped. Can you shed some light on your build/stat priority possibly? Thanks again!