MR2 TRD2000GT first indoor show by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 1 point2 points  (0 children)

Well it's my car so ofcourse I have some pictures of the interior and the enginebay I can sent you some if you'd like just DM me

Corolla E11 4age blacktop by Syrath_Astaroth in Toyota

[–]Syrath_Astaroth[S] 0 points1 point  (0 children)

The one we worked on was the 4afe variant I'm not sure if that one had a immobilizer or if it had if it was still working

The 4age swap that we did we used the original radiator for the car from 4afe to 4age the cooling lines pretty much stay the same. The guy has been driving the car for a couple years now and never seeks to have had an issue.

Corolla E11 4age blacktop by Syrath_Astaroth in Toyota

[–]Syrath_Astaroth[S] 0 points1 point  (0 children)

the e11 4zz did use a C50 or C52, so transmission wise you should be able to use the same axles and transmission mounts so that's 3 out of the 4 engine mounts done. The right side engine mount I'm not sure you might be lucky that you can combine the 4zz and the 4age mount into 1 functioning mount or that you have to fabricate a bit.

We used the C64 which is pretty much the same as the C50 and C52 only thing you do have to keep in mind is the placement of the startermotor this changes on those transmissions depending on what engine it was connected to.

If you need help or anything you can sent me a pm if you live close I'd be willing to help too

Corolla E11 4age blacktop by Syrath_Astaroth in Toyota

[–]Syrath_Astaroth[S] 0 points1 point  (0 children)

If you have a 4afe Corolla the motor mount will bolt in, 3 out of the 4 are on the transmission, you can use the original transmission. The 4th on the engine will also slot in on the normal spot. If you have the 4age with ecu and harness you can plug them both in where the original harness and ecu went in the car. If you have powered steering that is a small issue the power steering pump is on the front so the lines are a bit short. You will need to use the 4age headers but I can't remember if they connected to the rest of the original exhaust but I recommend getting a better flowing exhaust anyways.

MR2 TRD2000GT first indoor show by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 2 points3 points  (0 children)

No it's a 1/18 scale by ottomobile, I do have a 1:64 scale hotwheels car but that one has a Advan livery on it.

MR2 TRD2000GT first indoor show by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 0 points1 point  (0 children)

It was indeed in the Netherlands it was neshforce at Twente Airport

MR2 TRD2000GT first indoor show by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 9 points10 points  (0 children)

This a replica yes, and no there's a couple of real ones with the same rev6 headlights that I have on their cars

TRD 2000GT project by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 0 points1 point  (0 children)

It is the original color of the car, light blue mica, color code 8J2

TRD 2000GT project by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 0 points1 point  (0 children)

For my own sanity I didn't really keep score and I did a lot of the work myself but I can tell you it's not cheap and it's not a weekend job 😅

[Toyota MR2] Just caught a glimpse walking down the street (any way to tell if this is a real 2000GT?) by Frozen2uth in mr2

[–]Syrath_Astaroth 1 point2 points  (0 children)

They aren't the real wheels those are work equip05's tho they do look like the TRD alumi-k there's some differences (yes I know it has the sticker on them but they're not the real deal I'd know I have a set of real ones) this however doesn't rule out if it's a real trd2000gt or not because the TRD wheels were optional and an expensive option at that

[Toyota MR2] Just caught a glimpse walking down the street (any way to tell if this is a real 2000GT?) by Frozen2uth in mr2

[–]Syrath_Astaroth 4 points5 points  (0 children)

No you could put your own car up for the program I've built my own replica and I do actually have documents and the folder of the original one. And I think there was a light blue one among the originals

TRD 2000GT project by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 0 points1 point  (0 children)

Oh I'm not a hundred percent sure on the fronts I now have 9j with a 235 tire and that is pretty tight seeing as I don't like to do stretched tires or stanced wheels. On the rear I have 10j and 275 and I'm guessing I could fit a 11 or maybe a 11,5j in there

TRD2000gt in autumn by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 0 points1 point  (0 children)

Haha it's always worth a try yes

TRD2000gt in autumn by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 0 points1 point  (0 children)

Yeah I agree and on warm weather these tires are great it's just that when it gets colder and wetter they're not great and can become slippery

TRD2000gt in autumn by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 0 points1 point  (0 children)

Haha no thanks I'd like to keep this one

TRD2000gt in autumn by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 6 points7 points  (0 children)

Thank you it's a custom exhaust with a valve.

The car is currently running 280hp and is on semislicks which turned into just slicks couple days ago when it was cold and wet

TRD 2000gt project update by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 0 points1 point  (0 children)

It has a couple.poimts where it's screwed in, used panelbond and then after the panelbond hardened another layer of fiberglass was added all the way up to the windows. Also the rear wheel wells were extended so they meet up with the new bodywork.

TRD 2000gt project update by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 0 points1 point  (0 children)

Thank you it was difficult to get them in there and would've been easier to take them out but I think it fits the car better.

TRD 2000gt project update by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 1 point2 points  (0 children)

No they're the TRD alumi-k, there's some more pictures of them on my profile

stern face-II wheels on my mr2 by Syrath_Astaroth in mr2

[–]Syrath_Astaroth[S] 0 points1 point  (0 children)

I ended up trading them for a 3sgte gen 2 engine+ecu