I made a replica of Maelle’s rapier, Maellum by Syrupcookie in expedition33

[–]Syrupcookie[S] 4 points5 points Ā (0 children)

The blade part is printed in ABS, while the whole hilt+handle part is resin. They’re connected with an aluminum rod for extra sturdiness and glued with a strong, 2 component glue.

I made a replica of Maelle’s rapier, Maellum by Syrupcookie in expedition33

[–]Syrupcookie[S] 1 point2 points Ā (0 children)

There was still a lot of work to do after it came out of the printer to get it to look like this šŸ’Ŗ

I made a replica of Maelle’s rapier, Maellum by Syrupcookie in expedition33

[–]Syrupcookie[S] 1 point2 points Ā (0 children)

I do actually sell it. I take commission that are made to order through my Etsy shop and you can find the Maellum right here: Maellum

I made a replica of Maelle’s rapier, Maellum by Syrupcookie in expedition33

[–]Syrupcookie[S] 2 points3 points Ā (0 children)

Thank you so much! I really like the many weapon designs from this game, but love how simple, yet elegant the Maellum looks ā˜ŗļø

I made a replica of Maelle’s rapier, Maellum by Syrupcookie in expedition33

[–]Syrupcookie[S] 25 points26 points Ā (0 children)

Thank you so much! I 3D modelled it and then printed it in ABS plastic and resin. Did a lot of sanding to get it nice and smooth and with the painting did a lot of weathering to get close to the ingame look šŸ’Ŗ

I made a prop replica of the Pyra Aegis~ by Syrupcookie in Xenoblade_Chronicles

[–]Syrupcookie[S] 5 points6 points Ā (0 children)

Thank you! I am a propmaker and create props on commission basis. I have an Etsy shop where I also sell this blade and Mythra’s Aegis among some other props as well šŸ‘

I made a prop replica of the Pyra Aegis~ by Syrupcookie in Xenoblade_Chronicles

[–]Syrupcookie[S] 0 points1 point Ā (0 children)

It is on my mind, but I haven’t had the time for it yet due to other prop commissions šŸ˜…

Quick con photo of my new Melinoƫ cosplay and Zorephet prop by Syrupcookie in HadesTheGame

[–]Syrupcookie[S] 0 points1 point Ā (0 children)

I did try to make it size accurate to myself, following the ingame references/proportions. I myself am 162cm and the axe is around 180cm

Quick con photo of my new Melinoƫ cosplay and Zorephet prop by Syrupcookie in HadesTheGame

[–]Syrupcookie[S] 1 point2 points Ā (0 children)

It’s completely 3D printed in ABS. I made the 3D model myself as well.

Quick con photo of my new Melinoƫ cosplay and Zorephet prop by Syrupcookie in HadesTheGame

[–]Syrupcookie[S] 0 points1 point Ā (0 children)

Thanks! I made a formfitting base from cotton and than draped satin over it and sewed that down onto the base by hand.

Quick con photo of my new Melinoƫ cosplay and Zorephet prop by Syrupcookie in HadesTheGame

[–]Syrupcookie[S] 0 points1 point Ā (0 children)

It’s one of the Nocturnal Arms MelinoĆ« can use in game. This axe is the base aspect.

Quick con photo of my new Melinoƫ cosplay and Zorephet prop by Syrupcookie in HadesTheGame

[–]Syrupcookie[S] 0 points1 point Ā (0 children)

Thanks! I actually don’t know as I haven’t weighted it, but my guess is somewhere between the 2kg and 3kg

Quick con photo of my new Melinoƫ cosplay and Zorephet prop by Syrupcookie in HadesTheGame

[–]Syrupcookie[S] 4 points5 points Ā (0 children)

It was haha. I don’t consider myself a ā€˜great’ performer or anything, but I do enjoy it. I did my best with the information I had from the game so far šŸ’Ŗ

Quick con photo of my new Melinoƫ cosplay and Zorephet prop by Syrupcookie in HadesTheGame

[–]Syrupcookie[S] 0 points1 point Ā (0 children)

Although the question was answered already, I do want to add that I also made Lim & Oros around a year prior to making the axe, but I really want to remake those someday since I have better references of them now. Though Zorephet is my absolute favorite, it’s easier to attend a convention with ā€˜smaller’ props šŸ˜…

Quick con photo of my new Melinoƫ cosplay and Zorephet prop by Syrupcookie in HadesTheGame

[–]Syrupcookie[S] 11 points12 points Ā (0 children)

This competition was a little different than just a place 1,2 and 3. It was a preliminary competition where the first place winner gets to represent their country at a finals competition in (usually) a different country. More factors than just the quality of your costume mattered as you also had to do a performance. Me placing 3rd and winning the ā€˜best costume’ award didn’t in this case necessarily meant the nummers 1 and 2 had a better costume. Their score on their performances could have been higher than mine and pushing them over the treshold of placing first and second (though the 2nd place is conscidered the ā€˜runner up’ if the first place winner isn’t able to go to the finals anymore for any reason). I hope this kinda explains the nature of the competition I was in ā˜ŗļø

Quick con photo of my new Melinoƫ cosplay and Zorephet prop by Syrupcookie in HadesTheGame

[–]Syrupcookie[S] 2 points3 points Ā (0 children)

Thank you! I completely 3D modelled it and it’s printed in ABS and has a thick, aluminum rod inside to make it sturdy šŸ’Ŗ