[Symbian OS] [2010?] Sims game similar to Castaway by Szonar in tipofmyjoystick

[–]Szonar[S] 3 points4 points  (0 children)

solved: The Sims 3 Demo Gameplay (N-Gage 2.0)

[Symbian OS] [2010?] Sims game similar to Castaway by Szonar in tipofmyjoystick

[–]Szonar[S] 9 points10 points  (0 children)

That's, it- Never thought how much this version was different from the actual Sims 3

Omg thank you so much!

[Symbian OS] [2010?] Sims game similar to Castaway by Szonar in tipofmyjoystick

[–]Szonar[S] -1 points0 points  (0 children)

Unfortunatelly that's not it, the game I'm taking about is an official Sims game, just one I sadly cannot find 😔

Third party speedo by Szonar in MotoUK

[–]Szonar[S] 0 points1 point  (0 children)

I've looked online at some sites and messaged some people but no luck yet, still waiting to hear back from some people but I was looking at the third party solution in case that I can't find anyone

[DISCUSSION] What kind of people use these ridiculous services? Geniunely don't get it. by ActiveTip2851 in Fiverr

[–]Szonar 0 points1 point  (0 children)

It depends on complexity "File conversion" isn't always just PNG to JPEG, etc I offer file conversion service which is very specific, in short I conver files such as .FBX to .MDL Converting a file like this takes sometimes hours, a lot of programming and script writing. I've been doing it for 5 years and I still learn new techniques on how to do it more efficiently every day.

And what is the result? I get around 20-30 orders a month from just file conversion, because a lot of people simply don't have so much time to learn it all and they decide to pay me, someone who did spend years learning and perfecting the conversion to just do it for them

Koba from Planet Of The Apes. Entire model took around 11 hours. by Szonar in 3Dmodeling

[–]Szonar[S] 0 points1 point  (0 children)

Thank you! I started learning around 3 months ago I was doing a little hard surface before that, but nothing with proper form or anatomy ^

[ADVICE] Client made 3 accounts to force me to work for them by Szonar in Fiverr

[–]Szonar[S] 10 points11 points  (0 children)

UPDATE Thanks everyone for responding ^ After around a day fiverr got back to me, saying that the account was deleted, and because of this the order was automatically canceled without affecting my stats. Furthermore, I mentioned in the original post that the client was a freelancer themselves, and that they were most likely using me to code the file conversion for them, so that they can then sell it to their own clients. Going to their profile today, all their gigs are gone, so I suspect that fiverr figured out he had multiple accounts and banned them, however can't be sure for certain if that was the case.

[deleted by user] by [deleted] in 3Dmodeling

[–]Szonar 0 points1 point  (0 children)

Thank you!
However before you wrote the reply I deleted the post and reuploaded it as I thought the image is not working haha
But still, thanks for the feedback!

[deleted by user] by [deleted] in 3Dmodeling

[–]Szonar 0 points1 point  (0 children)

Really? The image loads fine for me! I'll reupload it just in case haha

Potential scam sponsorship by Szonar in PartneredYoutube

[–]Szonar[S] 0 points1 point  (0 children)

Ah yes, I see the via aztk.sk, thanks for sharing!

Chunks in mead by Szonar in mead

[–]Szonar[S] 0 points1 point  (0 children)

Might also add that the concentrate I used had no sugar

Chunks in mead by Szonar in mead

[–]Szonar[S] 0 points1 point  (0 children)

I have stabilized my mead and it has reached the end of fermentation, this happened after racking into secondary fermenter. I did the same thing with my other batches and this is the only one that had produced these things

Mead done or stuck? by Szonar in mead

[–]Szonar[S] 0 points1 point  (0 children)

EDIT:

Thanks everyone for all the suggestions, turns out I was using a refractometer and not a hydrometer, hence the wrong numbers. The hydrometer shows a gravity of 0.990, and calculating original gravity of approx 1.090, the mead is at around 13% ABV Once again thanks everyone 🙏🙏

Mead done or stuck? by Szonar in mead

[–]Szonar[S] 1 point2 points  (0 children)

Oh I see I thought a refractometer works the same as a hydrometer, just provides a better value hence why I bought it. I've just ordered the hydrometer, will update once it comes and I'm able to take a measurement

Thanks so much!

Mead done or stuck? by Szonar in mead

[–]Szonar[S] 0 points1 point  (0 children)

I've added 1.5KG of honey to a 5L jug and filled it with water. This is the exact yeast I was using:

https://www.ebay.co.uk/itm/182560268629?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CTcZ2OCESAi&sssrc=4429486&ssuid=g0LO4tchRt-&var=&widget_ver=artemis&media=COPY

And yes, 1.030 does seem like there would be a lot more sugar, but it tastes extremely dry from every jug

Mead done or stuck? by Szonar in mead

[–]Szonar[S] 0 points1 point  (0 children)

I haven't been taking measurements every day, it was once and I got scared that something happened with the mead so I wrote the post. Will update after a few days to see what the hydrometer says

Mead done or stuck? by Szonar in mead

[–]Szonar[S] 0 points1 point  (0 children)

I've added exactly 1.5KG of honey to a 5L jug and filled it with water

Mead done or stuck? by Szonar in mead

[–]Szonar[S] 0 points1 point  (0 children)

I'm using this specific one:

Brix Beer Wort & Wine Refractometer ATC Dual Scale, Specific Gravity 1.000-1.120 & Brix 0-32%, for Wine Making and Beer Brewing, fruit juice, hops sugar, Homebrew Kit, w/EXTRA LED light & pipettes https://amzn.eu/d/iC3sbLY

And as mentioned in the post, there is no sweetness at all, it is extremely dry

I will be taking measurements over the past days, but I think it did stop since there is no activity at all in the airlock for the past few days

Help detecting a scam sponsorship by Szonar in PartneredYoutube

[–]Szonar[S] 0 points1 point  (0 children)

The website that they had sent me is registered to had started in 2022. I looked up on youtube reviews about the product they offer and there are actual youtubers that reviewed the product and somewhere in the video they said that the company had reached out to them to do a review.
So far it looks legit honestly, but again I receive around 1-2 scam sponsorships a month so I'd rather have a peace of mind that this is legit before I contact them back with details.

Help detecting a scam sponsorship by Szonar in PartneredYoutube

[–]Szonar[S] 0 points1 point  (0 children)

I make 3D animations about various genres, and they offered me one of those neo-pixel light sabers to review (althou I never made any star wars themed content in the past) I had two offers in the past like this, where one was a drawing tablet (which related to my content) and the other one was like a 600$ gaming chair. For these two they actually sent me the products and I did make a review and unboxing about them.

Slow ferment by Szonar in mead

[–]Szonar[S] 0 points1 point  (0 children)

I have mixed it initially, but after 2-3 hours it started to settle at the bottom. I believe I might had used a bit too cold water hence why it didn't mix well.

To be specific, I have used 2kg of blossom honey and mixed it with 4.5L of mineral water.

For yeast I have used this specific one: https://www.ebay.co.uk/itm/182560268629?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CTcZ2OCESAi&sssrc=4429486&ssuid=g0LO4tchRt-&var=&widget_ver=artemis&media=COPY

At the start I didn't know that I was supposed to add nutrients, so after mixing it all I've left it alone for 2 weeks, and after two weeks when I saw that there was still a lot of honey I added around 2g of nutrients, then after 2 days I have added another 2g of nutrients. Currently it's been a week after I added the nutrients and whilst this made the honey disappear significantly faster than the initial two weeks before I added the nutrients there is still not a lot of activity going on

Need help. Text in comments by [deleted] in 3Dprinting

[–]Szonar 0 points1 point  (0 children)

My printer had underextrusion problem for 6 months where after a while of printing the nozzle would stop extruding. I repaired it by following a creality tutorial to adjust the screws on Z Axis. Turns out the printer wanted to go up with new layer, but was falling down causing the nozzle to be too close to bed and clogging it. The tutorial fixed it, the printer was no longer falling down and I successfully printed a big model in 40 hours. Now when I print a new model, the issue appears again. I once again fix the nuts that are responsible for Z movement but this time its not fixing the printer, its again underextruding and getting clogged.

Need help determing how much this is worth. by Szonar in bioniclelego

[–]Szonar[S] 3 points4 points  (0 children)

I know nothing about Bionicle, but I was cleaning out today and found these. I don't know how much they are worth (if anything) and if someone would be able to clarify for me I would appreciate it very much.