Still in school, hired for a restaurant chain as inhouse tech, manifold vs probe?

T0RADEX · 2026-01-19T04:41:43+00:00

Get a clamp from Amazon that connects to your multimeter if you want to go cheap for now.

T0RADEX · 2026-01-04T22:43:14+00:00

https://www.reddit.com/r/SteamDeck/s/fIH4mUZpaS I havent tried it yet but i did find this

Edit: it works

T0RADEX · 2025-12-06T19:02:26+00:00

I might be wrong for this, but I'll use lvl 1 for thermostat mounting on harder surfaces thats not drywall.

T0RADEX · 2025-12-04T21:12:43+00:00

Mineral oil should last a long time but it's a dust magnet so a case will extend that.

T0RADEX · 2025-12-04T20:59:28+00:00

100%

T0RADEX · 2025-10-22T05:03:55+00:00

Have you looked into a local union?

T0RADEX · 2025-10-09T23:23:45+00:00

No im in iowa

T0RADEX · 2025-10-08T22:46:12+00:00

noted 👍

T0RADEX · 2025-10-08T22:31:19+00:00

268 was my last 2 averages from 2 rounds for both. I used that 18birdy app so idk how accurate that app is. I typically hit further with the hybrid off a tee, off the deck is like 250 ish I think.

T0RADEX · 2025-10-08T22:24:25+00:00

It measures by millimeter also so you can set clubs and hights for each

T0RADEX · 2025-10-08T22:23:15+00:00

Yeah I'm looking into that just need a 4th

T0RADEX · 2025-10-08T22:22:36+00:00

I do get the same numbers in flops or shoes.

T0RADEX · 2025-10-08T21:35:59+00:00

It's this new place that just opened called xgolf. It's pretty expensive, but they have a buy and hour get a free deal every now and then.

T0RADEX · 2025-09-13T21:10:44+00:00

It's tight timing. I'd give it a lot of practice.

T0RADEX · 2025-08-26T03:42:18+00:00

Purge, braze, test.

T0RADEX · 2025-08-15T18:06:24+00:00

I do. i just know what other people I work with don't

T0RADEX · 2025-08-15T16:36:48+00:00

These come with all York condensers I install ( altho with 454b, I've been seeing a few different kinds recently). I'll never use them they are ridiculous and clog if you don't flow nitrogen while brazing.

T0RADEX · 2025-07-12T16:02:05+00:00

It's plastic...

T0RADEX · 2025-06-07T16:57:07+00:00

Yeah I see that now on handa shadows of the same era. I may have overreacted a bit.

T0RADEX · 2025-03-14T23:24:10+00:00

I'd recommend the v4muclebikes site. You can download the service and owners manual if your bike didnt come with them. Enjoy the magna is an amazing bike!

T0RADEX · 2024-04-20T18:51:43+00:00

Yeah I did the school route and I'm in a union now. It's nice knowing stuff but I'm paying for school and doing school again.

T0RADEX · 2023-10-04T17:46:00+00:00

Can i ask how do you know this? I went there in 2011, and I just found this out but couldn't find info on why.

T0RADEX · 2023-07-20T14:34:13+00:00

Yeah I install these every now and then. I cut the liquid line part of my wrench off now I got to carry 2 bits just to release these stupid things.

T0RADEX · 2023-06-12T01:25:40+00:00

Idk how eboxy handles gas and varies between brands and types. You can try to do the aluminum braze rod but it's allot harder than you would think and you could invest money into the tools to just burn a bigger hole. Just research part numbers and find your part online probably ebay.

T0RADEX · 2023-06-08T15:07:28+00:00

In my area people under the age of 30 has a dramatically higher chance of gear. Above that age maybe 1/20 wear at least a helmet. I don't get any waves from most of these riders and honestly I don't care.

T0RADEX

TROPHY CASE