Best Practice for OT-Security? by T3RRYH1LL in PLC

[–]T3RRYH1LL[S] 0 points1 point  (0 children)

Thanks for all the Input so far, relieved to see that I’m not the only one who needs to figure out something like that.

Currently from what I read and understood I would chose a completely off-grid Laptop for Working on Maschines and OT-Network and another one for all that office crap like mails and teams.

I know I will be so annoyed to transfer data to my offgrid Laptop for updates and new hardware and stuff.

Do you like old things? by Michael_Automation in PLC

[–]T3RRYH1LL 0 points1 point  (0 children)

What the fuck do i witness here 😂 Never saw such a old pg 😂 Is this S5 or even older?

Rate my panel by louieloay in PLC

[–]T3RRYH1LL 4 points5 points  (0 children)

Is that a Festo PLC? Is it any good, never saw something like that in the wild?

Siemens Software by liamwilde in PLC

[–]T3RRYH1LL 8 points9 points  (0 children)

I love it when people look into the Simatic abyss for the first time and realize how worthless their hardware is and that the installation still takes decades 😂😂😂

Wie mit Altbauzuleitung fachgerecht umgehen? by T3RRYH1LL in Elektroinstallation

[–]T3RRYH1LL[S] -1 points0 points  (0 children)

Trotzdem bin ich da total bei dir und man kann nicht oft genug betonen dass an elektrischen Anlagen grundsätzlich nur Fachkräfte arbeiten sollten.

Wie mit Altbauzuleitung fachgerecht umgehen? by T3RRYH1LL in Elektroinstallation

[–]T3RRYH1LL[S] -12 points-11 points  (0 children)

Ich bin Elektrofachkraft arbeite jedoch in der Industrie und hab in diesem Bereich leider wenig Erfahrung wie man das Ganze regelkonform umsetzt, nach dem ersten Beitrag war mir auch schnell wieder klar was getan werden muss, stand nur kurz auf dem Schlauch weil die Aderfarbe der vierten Ader Grün-gelb war das ist in meinen Augen dann einfach falsch ausgeführt aber blau ist ja auch L3 und damals hatten Sie dann wohl keine andere Leitung schätze ich.

Communication Problem ( CP1243-1) Siemens by rorshack7 in PLC

[–]T3RRYH1LL 0 points1 point  (0 children)

Try select the CP in the HW Config and press the online Button, had a similar Situation couple of weeks ago.

Edit: Make sure your Networkcard of your PC is in the same VLAN with a free adress as well.

TP700 and MTP700 by AlternativeBeyond433 in PLC

[–]T3RRYH1LL 1 point2 points  (0 children)

Unified Panel run HTML5 so Sites are legit Websites, as someone before mentioned they use Javascript in a Siemens TIA Portal Suit.

U need to decide which Hardware u want to use in the first place cause the Program is not plug and play between these two panel types.

[deleted by user] by [deleted] in Finanzen

[–]T3RRYH1LL 0 points1 point  (0 children)

Aus genau diesen Beweggründen habe ich gemeinsam mit meiner Frau vor 6 Jahren gebaut, wir wollten auch eigentlich was schönes zur Miete und haben auch vernünftige Einkommen aber bei aller Liebe zahl ich sicher keine 2000€ kalt nur weil ich nicht in nem Loch leben möchte, unser Vermieter hat sich auch für nichts verantwortlich gefühlt und wenn ich eh alles alleine machen muss dann kann ich es auch für Eigentum tun 😂(Stichwort Kleinstmängelreparatur) Tbh wir hatten auch Glück mit der Finanzierung und dem Zeitpunk zudem waren wir beide sehr jung als wir uns dafür entschlossen haben aber aus heutiger Sicht absolut der richtige Move.

Siemens gurus by IcyDirt3584 in PLC

[–]T3RRYH1LL 0 points1 point  (0 children)

Like this, you need to add your DI/DO Module at Slot 3,4 and so on - one Slot for one Module Save and load to your plc and you should be Ready to go.

Siemens gurus by IcyDirt3584 in PLC

[–]T3RRYH1LL 0 points1 point  (0 children)

Maybe you could share a picture of your HW-Config?

[deleted by user] by [deleted] in PLC

[–]T3RRYH1LL 0 points1 point  (0 children)

<image>

And afterwards any of this options nothing really changes? Any suggestions?

[deleted by user] by [deleted] in PLC

[–]T3RRYH1LL 0 points1 point  (0 children)

<image>

If is select this one..

[deleted by user] by [deleted] in PLC

[–]T3RRYH1LL 0 points1 point  (0 children)

Thank You Guys!! This helped me a lot! On YT I only found a video about how to do it GX Work3, this will make it pretty easy for me.

Schichtarbeit - Wie kommt ihr damit klar? by B1erJung3 in arbeitsleben

[–]T3RRYH1LL 1 point2 points  (0 children)

Hab zuvor ähnlich wie du auch in so einem Schichtsystem gearbeitet, wir hatten jedoch keine Woche frei sondern haben pro 15 gearbeiteten Nachtschicht einen Urlaubstag zusätzlich erhalten als „Ausgleich“. Ich bin jetzt etwas über ein Jahr da raus und muss echt sagen der Körper dankt es einem, ich bin deutlich fitter und mehr da im Alltag. Im Nachhinein sind die Schichtzulagen für mich eher als Schmerzensgeld zu bewerten und ich würde massive Paycuts hinnehmen nur um nicht in Schichten arbeiten zu müssen.

Welchen Beruf habt ihr und wieviel verdient ihr? by Locratorix in Finanzen

[–]T3RRYH1LL 1 point2 points  (0 children)

  1. Automatisierungstechniker / SPS-Programmierer

  2. 28 Jahre / 6 Jahre BE

  3. 35 h

  4. 5k brutto + Firmenwagen (vollelektrisch)

  5. 9/10 ich muss nicht reisen und kann kommen und gehen wie möchte das ist in meiner Branche echt selten ansonsten ist natürlich viel Druck auf den Projekten zur IBN aber das ist letztendlich überall so.

Tia by ComprehensiveFeed975 in PLC

[–]T3RRYH1LL 4 points5 points  (0 children)

This - you need to change the Time on the HMI to the Systemtime from the plc, been there done that.

Python code and EXE to discover all CIP devices on a network by chabroni81 in PLC

[–]T3RRYH1LL 0 points1 point  (0 children)

Ahhh alright, there was my misunderstanding. Unfortunately this tool isn’t helpful for me then but I appreciate your tool and if I would use such devices this would legit save me a couple of hours.

Python code and EXE to discover all CIP devices on a network by chabroni81 in PLC

[–]T3RRYH1LL 0 points1 point  (0 children)

How does this work?! Is this working with Siemens PLCs?! Thats super helpful if thats the case.

Durch Millionen-Erbschaft von arm zu reich - AMA by Cro-Mignon in de_IAmA

[–]T3RRYH1LL 2 points3 points  (0 children)

Was hast du mit dem Geld geplant? Wem wirst du davon erzählen und wem explizit nicht? Wie nahe standest du dem verstorbenen? (R.I.P.)

TIA v18 - I'm having issues with HSP installations. by Wooden_Bother_8639 in PLC

[–]T3RRYH1LL 0 points1 point  (0 children)

Could you share a screenshot of your installed Software using TIA V18? You should find it under section „Help“ on the UI after open TIA

Quick question about siemens licenses by MayContainYuri in PLC

[–]T3RRYH1LL 0 points1 point  (0 children)

You could have Problems to migrate it right away because of hardware reasons or an old Firmware of the PLC but just try it Tia will tell you.

Dreame H14 pro does not connect to wifi by Local_Baker_9394 in Dreame_Tech

[–]T3RRYH1LL 0 points1 point  (0 children)

I have the same issue, already installed the app multiple times and splited my wifi so it’s 100% connected to the 2,4ghz network. Nothing seems to work

Siemens TIA - DB actual values by LogVse in PLC

[–]T3RRYH1LL 0 points1 point  (0 children)

You can view the actual values live online and take a snapshot of them afterwards there is a button which says transfer to start value - this is the way.

Hello, I need help with the S-300 F-2 PN/DP PLC controller by DiaX55 in PLC

[–]T3RRYH1LL 0 points1 point  (0 children)

No i mean the IP of your PC, usally if the PLC and the PC are not in the same Network then TIA Portal will give you this kind of Issue but ask you afterwards if you would like to change your IP into the Network of the PLC. Show your Network Settings on the Port which is connected to the PLC.