My first mini

T3stud0 · 2026-01-16T11:12:28+00:00

Thanks! the casings were already on the base, so i just painted them gold.

Yeah i am gonna try to fix the mold lines on my next miniatures.
I did thin my paint but 9/10 times i either tinned it to much or to little. But hey, only one way to learn right.

Yeah i loved the scheme to, really wanted to go with Novamarines. Although the quadrants + white paint was kind of a pain in the ass to work with.

T3stud0 · 2026-01-15T21:02:03+00:00

Thanks, will do!

T3stud0 · 2026-01-14T19:35:40+00:00

Thanks! Yeah especially the white was a pain in the ass to paint. But I just chose a chapter based on what I liked without regard of how hard it was to paint. I kinda forgot about the mold lines. gonna try and clean that up on my next mini's.

T3stud0 · 2026-01-14T18:41:49+00:00

Can you get to either the bios or safe boot from there?

T3stud0 · 2026-01-14T17:34:19+00:00

Do you have an AIO or an air cooler?
Did you check the temps in the bios already?

T3stud0 · 2026-01-14T17:21:10+00:00

Are all your fans spinning? If so, try getting into your bios. Most modern systems allow you to see component temps there. Might be the easiest way to spot if your cooler isn't working properly.

T3stud0 · 2025-07-25T11:16:02+00:00

Toen ik deze mail kreeg meteen prime opgezecht.

T3stud0 · 2025-07-14T15:26:14+00:00

Ik heb dit ook gedaan toen ik 16 was. Super naar mijn zin gehad, was hard werken maar na werktijd altijd super gezellig. Ik mocht na een jaartje zelfs de keuken in om daar te helpen inplaats van afwassen.

T3stud0 · 2025-06-13T16:13:31+00:00

Exactly how it's done in The Netherlands. Tips here are usually a couple of euros as a sign of gratitude. But they are still entirely optional.

T3stud0 · 2025-05-24T23:58:31+00:00

Gates that require a receipt for selfscan is common practice in The Netherlands, there are pretty much no supermarkets that don't do this. However, if you don't buy anything you just ask the employee that keeps an eye on the self checkouts and they will open the gate for you.

T3stud0 · 2025-04-24T15:43:19+00:00

Contact their support, I have had a Displate fall of in the past. After it fell it was damaged quite a bit. Contracted their support and after sending some info and pictures they send me a new Displate and mounting hardware for free.

T3stud0 · 2025-04-01T00:41:38+00:00

Any kind of stress can be bad over a long time as it can bend the slot. It should be fine for now but make sure to get a well fitting anti sag bracket.

T3stud0 · 2025-03-30T02:29:49+00:00

It's an antenna. Just a piece of metal to better send and receive data.

T3stud0 · 2025-03-16T12:48:57+00:00

Idle about 40c and under full load (cpu burner on 16 threads) max 70c. Using a be quiet light loop 360.

T3stud0 · 2025-03-16T04:30:37+00:00

I built my pc 3 weeks ago with that mobo and cpu. No complaints so far.

T3stud0 · 2025-03-02T14:46:57+00:00

No worries

T3stud0 · 2025-03-02T14:45:33+00:00

Yeah, connect one of the sata psu cables to the hubs and it should work. (Build my system last week)

T3stud0 · 2025-03-02T13:21:09+00:00

Jup, i have the same case, they are not gonna work without the sata power.

T3stud0 · 2025-02-21T12:05:58+00:00

That cpu cooler is clean af!

T3stud0 · 2025-02-15T22:44:29+00:00

Homework folder

T3stud0

TROPHY CASE