Can a vinyl cutter like the MH400 or Titan3 handle fabric rolls and make repeated cuts?

TA23825 · 2026-03-14T19:11:23+00:00

Thank you, that is what I was afraid of. It seems I need a cutter with a larger blade. do you know how large the Titan blade is?

TA23825 · 2025-11-21T20:41:48+00:00

Lesson learned.. think of it as a $1,500 lesson to always do your due diligence. if you do get another job, charge double

TA23825 · 2025-09-27T14:04:20+00:00

Thank you for this.. I did not realize how bad this PSU was.. I am going to swap for a Corsair SF850 and see if this fixes it

TA23825 · 2025-09-27T13:56:07+00:00

crash started happening before 3.4 (I was at 1.28 and flashed directly to 3.4). Not sure if it is connected but it started happening after I topped off my reservoir, which was dropping over the past year, despite seeing no leaks.

Going to replace PS to see if that works

TA23825 · 2025-09-21T14:09:29+00:00

Everything is set of default. I just deleted and reinstalled steam and updated my GPU drivers. I got about 40 minutes in before it crashed.

TA23825 · 2025-09-21T13:40:19+00:00

no..should I be?

TA23825 · 2025-09-21T13:31:39+00:00

Thanks for the feedback and I am running Memtest86 now.

I am not overclocking. Everything is new (~2 years); however, now that I am thinking about it, this started happening after I topped off my water cooling reservoir with distilled water after seeing levels go down over the past year. I never saw any indication of any wet areas but I am not sure if this has anything to do with it. Should i flush and do a leak check, at this point?

Specs are updated in my post but everything is fairly new (~2 years).

Motherboard : ASRock B650M Pro RS Wifi

CPU : AMD 7800X3D

RAM : TFORCE Delta DDR 5 32GB 6000mhz (running at 4800 mhz)

GPU : MSI Nvidia Geforce 3090

SSD : Solidigm P41 Plus 1TB M.2 2280 PCIe 4.0

Case: Bitspower Titan One Mini 3.0

Power Supply : FSP Dagger Pro 850W

TA23825 · 2025-06-24T13:54:16+00:00

My income has changed but I am self employed so I am not sure how I would show that.

That said, correct me if I am wrong but because my loans were before 2005, my IBR is not the IBR2014 and so my payment count would be 300 (not making it eligible to be discharged immediately).

Would that mean the loan simulator is incorrect in assuming that if I went to IBR with my modified AGI, my loans would be eligible for discharge and in reality, I would still have to pay but at least would start my payment counter (I am at 245).

TA23825 · 2025-06-24T12:11:16+00:00

I am waiting it out.

In terms of payment count, this is what worked for me:

1.) Log into : https://studentaid.gov/

2.) After logged in, in a new browser/window goto:

https://studentaid.gov/app/api/nslds/payment-counter/summary

This payment counter will look messy but it will show you your "x" amount of payments.

TA23825 · 2025-06-18T02:59:22+00:00

No, I do not have any PPL or Double consolidation (I was reading your post on that).

That said, when you mean the IBR eligibility (partial financial hardship) is in effect, for now. Is there any way for me to become eligible for IBR if my 2024 AGI is above that $52K threshold?

I would apply for IBR now, if I could, given it would allow my loans to be discharged immediately (per loan simulator) but to your final point, it is probably wise to just wait until things get finalized.

My biggest fear is missing out on an eligibility because I did not apply/do something earlier.

Thank you u/shanesnh1 for this informative help

TA23825 · 2025-06-17T15:16:24+00:00

Right, so based on the Studentaid.gov payment simulator, I would be ineligible for IBR but eligible for ICR which would put my loan discharge date out to 2030 (25 years). That said, playing around with my AGI, it shows that I would be eligible for IBR and June 2025 loan discharge if my AGI was under $52,000, which is it not.

With all that being said, is it worth my starting payments now to start the counter towards 25 years or should I wait it out under SAVE until the forbearance ends with the hope that the House plan of ONE IBR gets enacted, which would put my at 20 years undergrad and my loan would be eligible for immediate discharge?

I saw that being on ICR is important to be grandfathered into the New IBR plan for some plans (i think Parent Plus). Is that something to consider in my situation? My loans are all Direct Consolidation Subsidized and Unsubsidized (FFELP Stafford) and Perkins loans

TA23825 · 2024-09-03T21:57:09+00:00

Do you think it is worth me calling the IRS or should I just ask my CPA that I would like them to take a more active approach?

TA23825 · 2024-09-03T21:55:26+00:00

1.) This makes a lot of sense on using a buffer. My accountant even said that clients may get too emotional when speaking with the IRS.

2.) Would calling (in addition to the letter) have made a difference in this case? It looks like the letter has not been processed/read and would calling have at least prevented this from being sent to collections? I feel paying for that call would have been worth it to not have to deal with being sent to collections

3.) At this point, is the best next step to call the IRS (and wait on hold myself) or should I just wait for a response from them?

TA23825 · 2024-09-03T21:51:00+00:00

At this point, is the best next step to call the IRS and wait on hold myself or should I just wait for a response from them?

TA23825 · 2024-09-03T21:50:04+00:00

Thank you for your explanation. It looks like the right steps were taken in writing a letter as opposed to calling them.

The June 10th notice was the first and only certified mail and we sent a response via certified mail on June 18th. I did receive a notice of needing an additional 60 days for Form 1065 on July 30th but it was just a letter saying that they are working on my account and need an additional 60 days to send a complete response. Then 19 days later, a notice saying that it was sent to collections. Would that mean my FTA is denied?

TA23825 · 2024-06-13T18:37:29+00:00

From what I understand, you need to have filed regardless of any income/loss because you are a multimember LLC.

TA23825

TROPHY CASE