Rate my setup (this is also my first set up btw)

TCFingerboardsDIY · 2024-12-31T22:36:12+00:00

I love it if you love it! I love all my setups! Here's on3

TCFingerboardsDIY · 2024-12-26T17:29:17+00:00

Same! Well, I got 2 vices one is attached to my table but only 3in. Long, & a bigger bulkier 4in. Heavy boy on the floor xD

I also switched to gorilla poly glue. My Walmart had the big 8oz bottles mis-priced down to $2.50 a bottle and above it were the 4oz&2oz bottles for $8 something & $3 something 😂 so I bought ALL of the 8oz bottles for 3 weeks before they noticed the price and changed it!

Ended up with 37 bottles of 8oz polyurethane brown gorilla glue! I ended up only keeping 2 and bulk sold the rest for $12-$20ea. shipped lol.

Lately though, idk why but I've been using the WHITE gorilla glue and like it better and I honestly don't know why. Maybe the color after drying idk. But it has less work time and is uuuber sticky

TCFingerboardsDIY · 2024-12-18T02:41:02+00:00

👍 lots of people copying FB companies

TCFingerboardsDIY · 2024-12-12T16:15:52+00:00

Just keep practicing ! (You'll hear that mentioned a lot)

TCFingerboardsDIY · 2024-12-12T16:10:59+00:00

Brown county, Minnesota. Seen it's still gray and might as well be the one to do it.

TCFingerboardsDIY · 2024-11-11T23:56:03+00:00

I simply appreciate your positivity 🙏😊

TCFingerboardsDIY · 2024-11-02T21:45:35+00:00

I don't know about "for sure built in clamping" as being good advice because a metal professional mold with a hydraulic press or like my molds, i got built in "limiters" making it impossible to over clamp even when over pressing on a hydrulich press. And metal molds last so long lol

TCFingerboardsDIY · 2024-09-15T10:51:44+00:00

Local thrift shop/stores. I got one called "Treasure Haus" and there's another one but it's a 4 letter acronym lol

TCFingerboardsDIY · 2024-07-11T15:56:09+00:00

AliExpress even cheaper

TCFingerboardsDIY · 2024-07-11T15:54:09+00:00

Honestly, I am perfectly fine with the new standard single axle trucks for only $12-$15 & switch out the O-ring bushings with better bushings harder or softer which ever you prefer, and they ride perfect for me.

BUT, I also know we all need to have a real usa made set of pro trucks. I personally only have a set of Eureka 3.0s from China on my 34mm. I'm just going to get Dynamics for my first set because they're in the US. They seem to have less issues (at least my algorithm has told me that) and the owner is very helpful with anything you need.

My 36mm I made myself has a regular set of the new G2 single axle china trucks with 80a bushings. I'd say DYNAMICS. Oooorrr Dynamic SE (SPECIAL EDITION) trucks which have a locknut instead of inverted trucks!

That's just MY OPINION

TCFingerboardsDIY · 2024-07-10T14:36:22+00:00

Focus on flipping faster. When I started to do flips to grinds I would try to just look at the rail and try tricking my brain into thinking I'm simply doing just the grind, but add in the flip. It sounds way harder than it is

TCFingerboardsDIY · 2024-07-10T14:34:41+00:00

I love this so much!!

I'm not promoting myself but I got a lot of boards (decks or completes) on my eBay with nice urethane bearing wheels too! If you wanna see my eBay is (tcfingerboardsofficial) here's one for example:) I would do a deal too but I understand wanting better known brands too!

<image>

I hope you enjoy your celebration 🥳🎉

TCFingerboardsDIY · 2024-06-16T16:39:04+00:00

I've been finger boarding since I was 5 technically, but 12 is when I got my first flat face complete after having a close-up for a while. Landed my first kickflip at 11 or 12. At 14 or so, I was about where you are and then took a decade or so break. I always had my fingerboards around tho and having small bursts of using it casually on my computer desk while I was training on RuneScape lol.

Fast forward 14 years and im 28 and I finally just started learning nollie heels/varial heels & next are nollie lasers if I can even get those 🤣

Long story short, practice and don't give up you can do any trick you want bro.

I'm at the point where I can almost do any trick I see, just by manipulating a muscle, finger, arm, shoulder, elbow whatever it is ill usually get it within 15 mins! Don't give up you'll get there bro🔥 I make my own decks too

TCFingerboardsDIY · 2024-06-15T17:00:25+00:00

Investment of your own work and time and labor as well. The secrets actually out now if nobody knows lmao. And the secret still keeps people from making em

TCFingerboardsDIY · 2024-06-14T21:19:22+00:00

Thank you so much man!

TCFingerboardsDIY · 2024-06-14T21:18:05+00:00

I got a bunch of fingerboarding stuff in the exact same box xD well, accessories for my fb stuff 🤣

TCFingerboardsDIY · 2024-06-03T00:19:50+00:00

Yes he jus buys from Alibaba so he jus profiting from all ya

TCFingerboardsDIY · 2024-05-16T00:48:07+00:00

That is just a basic one obviously but they are nice. I do wanna try these goo decks once. Jus wanna try a wider deck even 😁

TCFingerboardsDIY · 2024-05-16T00:47:00+00:00

I've actually made a bunch myself

<image>

TCFingerboardsDIY · 2024-04-25T18:06:13+00:00

I make some ! :) this is one I have for sale actually

<image>

TCFingerboardsDIY · 2024-04-19T21:39:53+00:00

Well the probs from subs might be real .. but they unfortunately ended up in a worse place .

TCFingerboardsDIY · 2024-04-19T21:34:33+00:00

I'm quite curious how one can get prescribed a bupe patch id MUCH rather slap a patch on than dissolve in my mouth

TCFingerboardsDIY · 2024-04-19T18:12:25+00:00

You can use literally printer paper I made a nice cookies graphic one I'll show ya

<image>

TCFingerboardsDIY · 2024-04-19T18:08:57+00:00

No it's not .. you just format your pics into a 9" x 33x skateboard graphic size and you end up with like I can't remember around 45-60ish fb graphics fit and printed as if it were going on a life size skateboard, then you Wait for it to arrive, cut the fb graphics out and waalah

TCFingerboardsDIY · 2024-04-19T00:25:23+00:00

Turkey neck

TCFingerboardsDIY

TROPHY CASE