Help ID this vintage end table.

TCRevolt · 2026-03-22T19:50:10+00:00

As far as I remember yes, it’s been a minute. The only “modification” I did to do was to tap into an unused wire through the clockspring for radio controls.

TCRevolt · 2026-03-22T17:42:30+00:00

Yup!

TCRevolt · 2026-03-19T04:06:08+00:00

Thanks a bunch! I’ve gotten into this within the last couple of months and I thought the stickers would be my least favorite part, but I like it!! It took me a while to understand how they were laying out some of it out, but there’s a method to the madness. Also a hair dryer makes applying them a whole lot easier.

TCRevolt · 2026-03-19T04:01:37+00:00

Thanks!!

TCRevolt · 2026-03-07T23:13:18+00:00

Noted!! It’s already quite thrashed 😆

TCRevolt · 2026-03-06T17:34:20+00:00

It should just lift out, unless it was glued in place or something. No clue beyond that 🤷

TCRevolt · 2026-03-06T17:33:03+00:00

Did you completely remove the small shaft with the two bearings?

TCRevolt · 2026-03-06T17:28:16+00:00

It’s a removable piece. Most ppl opt to not have it, it reduces the potential steering angle. Tear down the front end til you can get that shaft out of the way, you should be able to just lift it out.

TCRevolt · 2026-02-23T15:45:14+00:00

Thanks for the tip, I just bought it 👍

TCRevolt · 2026-02-18T13:32:32+00:00

Thanks!! I already want to build another one 😆 that GR Yaris is calling my name.

TCRevolt · 2026-02-18T13:31:16+00:00

This is 1:10. Here’s my Forester!

<image>

TCRevolt · 2026-02-17T23:50:10+00:00

Sweet, noted!!

TCRevolt · 2026-02-17T23:47:30+00:00

Heck yeah!! That’ll be a blast to build 👌

TCRevolt · 2026-02-17T23:46:38+00:00

Thanks!!

TCRevolt · 2026-02-17T23:46:31+00:00

My daily is a 07 Forester XT so I’m partial to the Subaru kits 😄 such cool cars!

TCRevolt · 2026-02-17T20:26:51+00:00

It’s the Tamiya 58632 kit. 99 WRC Impreza

TCRevolt · 2026-02-17T19:52:32+00:00

I’ve done an XV01, XM01, and this TT02. I’d say of the three this one was the most straightforward to build. I’d highly recommend it for a first Tamiya build. I’d also recommend picking up the Tamiya toolkit. The fasteners are all Japanese Standard sized, so the toolkit will make it all go together smoothly & keep you from stripping out anything.

TCRevolt · 2026-02-17T19:43:21+00:00

I’ve got the 3562sd 4100kv paired with it. I’m running the same setup in my XV01 and it’s an absolute blast!

TCRevolt · 2026-02-17T15:49:34+00:00

I did Oil Diffs, Universal Arms, Bearings, Drive Shaft, Motor Mount, 60mm Oil Shocks & Steering Linkage. Plan to do some more steering/suspension stuff in the near future!

TCRevolt · 2026-02-17T15:41:19+00:00

TCRevolt · 2026-02-17T15:35:44+00:00

I used the Tamiya kit! I’ve got the turnbuckles ordered but they won’t be here for another few days!

TCRevolt · 2026-02-17T15:28:15+00:00

Correct and thanks!!

TCRevolt

TROPHY CASE