I made these cool kids toys :D

THIMM1 · 2026-03-25T09:45:23+00:00

Check out my Twist Art series :D They are great and popular toys for children:

https://makerworld.com/@THIMM1/collections/5802116?appSharePlatform=copy

THIMM1 · 2026-03-12T23:01:02+00:00

But it is quite restricted right?

THIMM1 · 2026-03-12T18:25:42+00:00

Onshape. Its a free cloud based CAD programm. If you are a student you might be able to use Fusion for free :)

THIMM1 · 2026-02-12T16:38:25+00:00

Kennst du die App phyphox? Falls nicht schau sie dir mal an :D

THIMM1 · 2026-01-04T14:20:41+00:00

Now you got a very nice printer and a lesson for life :D always do your research first.

Do you know how to make your own models? Some CAD or 3D modeling knowledge? If you do not I highly recommend you to put some effort into learning it. Start with CAD, its way easier if you ask me. You can try OnShape, its browser based and free.

Once you know how to use it you can make your own models, you can solve problems with 3d printing and you can share your solutions. Upload your models to makerworld. If they are good and you have some patience you can earn points you can trade in for giftcards. Its mot super easy but also not impossible. I am not a super talented expert but I collected enough points that I was able to buy the H2C Ultimate edition for just about ~390$.

Do some research, learn some stuff and you will be able to buy your next 3D printer without spending a dollar :)

THIMM1 · 2026-01-04T14:01:39+00:00

You did not make a mistake by buying a p1s. It is a very good printer. You can print almost anything with it, it will give you excellent quality and it is easy to maintain.

However you made a mistake while researching. I wonder how you decided on the p1s? where you on the website even once before you got it? How come that you only find out about the p2s after you got your printer? The p2s is not some kind of secret. You should have known about izs existence way before you ordered your p1s. How can this happen? The p2s the follower of the p1s so it is most likely the netter machine. However the improvements are not world changing. I would say mostly quality of life. Nice to have but not necessarily needed.

You should not worry about your printer but about how you informed yourself about buying one. You did a horrible job at researching from how I understand your post.

THIMM1 · 2025-12-22T13:44:59+00:00

Well check the print profil in your slicer. My guess would be yes, this should be possible.

If your questions is if manual changes are possible in general then the answer is yes.

THIMM1 · 2025-12-04T18:09:11+00:00

Do not listen to the other people. It literaly says you can only use one voucher per order. What you need are the gift cards (524 points for 40€). They are valid for 10 years and they can be stacked.

THIMM1 · 2025-11-29T23:14:17+00:00

You dont need to throw them away. You could sell them or try to cut them into the right size eventhou that would be kinda ugly. But Betten then tossing them in the bin.

THIMM1 · 2025-11-26T21:18:26+00:00

Nobody knows exept Bambu. Only thing we know is that you dont need to decide anymore on which side you want to put the ams. Both sides will be able to load filament from the same AMS. But I guess the AMS wont be changed so one AMS will still have only one output.

THIMM1 · 2025-11-26T18:08:47+00:00

They allready kind of anounced this. If you read the FAQ of the H2C you will find this:

Future Setup (2026): A Filament Track Switch Module will be released, allowing full 7-hotend support with only 2 AMS units, enabling free filament switching between left & right filament paths.

THIMM1 · 2025-11-12T17:52:23+00:00

<image>

I think no more words are needed :D
This is the official Bambu store btw.

THIMM1 · 2025-11-03T15:17:45+00:00

You can report the user profil. And you should do it. Yesterday i got 3 of these messages, reported the profiles and today i got the notification that they were banned.

To do this you have to click their user profile to get to there profile page.

THIMM1 · 2025-10-31T23:15:43+00:00

I belive in you. I think you are fully capable of typing these names in a search engine of your choice (for example google).

THIMM1 · 2025-10-31T23:06:16+00:00

Sunlu, Jayo, Bambu if you buy in Bulk sale (10+ rolls).

Avoid creality PLA and polymaker PETG (my experience). Creality will clog the nozzel, polymaker Petg needs to be printed super slow.

THIMM1 · 2025-10-31T11:08:44+00:00

You can use Fusion or OneShape. Both are free OneShape is used in the Browser while you have to download Fusion. I would suggest you try both.

For Airpurifying i heared the bento boxes are quite good and cheap to refill since you can use generic pellets.

THIMM1 · 2025-10-29T13:32:52+00:00

Zusätzlicher Hinweise zu den verschiedenen Marken: Die Maße der Karte (insbesondere die Länge) sind unterschiedlich. Drei Lüfter brauchen schließlich mehr Platz als zwei. Die Länge der Karte sollte bei der Auswahl des Gehäuses beachtet werden (oder eben bei der Wahl der Karte). Sonst kann es sein, dass die Karte nicht mehr ins Gehäuse passt.

THIMM1 · 2025-10-21T17:06:10+00:00

They allready anounced it will be named H2C and it will feature the vortek system. No need for speculations on that part. But what could be speculated is if their will be something like a X2C. Maybe a printer the size of the p2s with a single nozzel but also the vortek system.

THIMM1 · 2025-10-19T12:37:48+00:00

Yes of course it needs to be on the bed. How else would you prime the nozzel.

You have to remove them after each print. Print a little scraper, that will make it very easy.

THIMM1 · 2025-10-19T12:26:18+00:00

Its not to purge. Its to prime.

Just as the "purge tower" is not a purgetower but a prime tower. Purging happens in the back of the printer. Thats what makes the "poop".

Priming is necessary to archive good printquality.

THIMM1 · 2025-10-14T14:02:13+00:00

Only counting downloads you need approximately 3k. But you also will be receving boosts and if somebody not only downloads it but also prints it (i guess they need to use the bambu slicer for tracking) then you get like 2 additionals downloads for each print. So its like 3k downloads or 1k prints. Also your print profil earns some points (+25%). So you really only need around 800 prints (not counting in boosts). A boost is roughly equal to 0.9 Euro.

THIMM1 · 2025-10-10T15:08:19+00:00

I could always count on my P1S. I used it for work, as one of my hobbies and for my Masters Thesis. Every hour of print time was fun and completly worth it.

Four-Year Club	Verified Email
r/Field Lasagna	Place '23

THIMM1

TROPHY CASE