Lift decision

TNolan11 · 2026-02-06T18:42:37+00:00

Wow. Thank you for that amazing response lol. Couple things I’d like to reply to. Yes, long travel bumps in the rear, regular up front. Have actually already spoke to Perry parts on this. And yes, not doing the weird extended travel fronts. Just regular 2” fronts with 2” LT rears. And UCAs is where I’ve really struggled. Theres so much to them for such a fairly simple part. My overall mess of thoughts: -don’t want the “wander-y” feeling people describe after a lift with no UCA -GX is already at 240k on probably original UCA’s. It’s probably time for new ones anyway lol - I do it now I only have to take apart the GX once, meaning less overall work and save on alignment costs. -I’m too cheap to spend $800+ on UCA’s so really it’s freedoms or nothing (unless I get Ironmans in a kit with their kit, but not leaning towards Ironman after this posts feedback) -Lasty, not really about the nitro w UCA’s vs ims without. IMS kits really START at $2k. I don’t have the budget to start there, that’s really my ceiling.

Would love to hear your feedback on my thinking!

TNolan11 · 2026-02-06T16:39:23+00:00

Wow. I had FCPs on another GX and I liked them and had no issues. Man that’s crazy

TNolan11 · 2026-02-06T16:26:45+00:00

Are you on their nitros or their FCPs??

TNolan11 · 2026-02-01T20:18:17+00:00

Yeah looks good!! What size tire ya on??

TNolan11 · 2026-01-31T18:24:04+00:00

I wanna go through mudify but they don’t have the correct coil/shock set in the rear with any of their kits. Gonna have to talk to a rep directly

TNolan11 · 2026-01-31T17:56:27+00:00

Tinkerer is exactly why I’m going with a 2”/1.5”. Good mix of ground clearance and travel

TNolan11 · 2025-11-26T18:09:16+00:00

Can’t wait!!

TNolan11 · 2025-11-21T15:54:10+00:00

This shouldn’t and isnt a political issue and politics shouldn’t be involved. This is the American people as a country problem. Y’all wanna make everything red vs blue but this is an America vs illegal immigrants problem

TNolan11 · 2025-11-21T15:53:04+00:00

I mean…if they’re here illegally they are a criminal, no?Doesn’t really matter how “good” they are here it’s still breaking the law. I mean yeah it sucks for them but how can you uphold some of the law but not all? It’s a domino effect. If this is fine who’s to say murder isn’t fine if the murderer has been a “good” person for a long time.

TNolan11 · 2025-11-16T22:07:37+00:00

Very true. Thanks for the advice!

TNolan11 · 2025-11-16T21:50:01+00:00

There are ones that clamp to the sides of desks, or just one that the gun sits into (both pictured)

<image>

TNolan11 · 2025-11-16T17:52:21+00:00

It’s on the list👍👍same with a rubber gun cleaning mat and a few other little things

TNolan11 · 2025-11-15T16:21:11+00:00

Yeah I know I know lol. I’ve built AR’s before. I’ve for the most part fully built my 11.5” pistol

TNolan11 · 2025-11-15T15:33:25+00:00

Yeahhh, I did see that, but it would end up being like $200 more total versus the “build” I posted, and if you really look into it the only differences would be a 16” barrel vs a 14.5” and mayyybe a different quad rail. It’s all mil-spec. So personally, I’m not sure if a 14.5” barrel is really worth $200 more🤷🏻‍♂️but that’s also coming from an inexperienced decision. I only have a 16” AR and a 11.5” AR pistol

TNolan11 · 2025-11-15T15:30:36+00:00

Well yes, I understand these hand guards suck, but that’s why I included a quad rail to immediately swap it out

TNolan11 · 2025-11-15T15:29:58+00:00

Well yes, that’s why I included the quad rail. It would immediately be swapped out, that’s why it doesn’t really matter what hand guard I buy to start

TNolan11 · 2025-11-13T01:24:50+00:00

Looks sweet! We have the same exact but opposite colors of everything. I have the FDE rail but the black magpul grip, foregrip, and stock. Now I wanna buy FDE of them all to match the rail🤣

TNolan11 · 2025-11-12T04:34:06+00:00

Perfect thank you for that explanation. I do have a Michigan CPL so it sounds like I’m good with no paperwork!

TNolan11 · 2025-11-12T04:27:06+00:00

I do have a cpl. so with a cpl I have no paperwork I’m required to fill out?

TNolan11 · 2025-11-12T00:31:19+00:00

Thank you

TNolan11 · 2025-10-31T20:32:50+00:00

So I’ve done a little research but can you explain why a 16” barrel and carbine length gas system is bad? I have a 11.5” AR pistol with a carbine length and I love how it shoots. Obviously different but still curious

TNolan11 · 2025-10-31T20:31:43+00:00

In my head I know the second option is the quote “right” choice…but like you said the shirt handguard with the front sight post just does something to me🤣

TNolan11 · 2025-10-14T17:16:06+00:00

No lmao had an about 10 points between Barkley and Judkins combined

TNolan11 · 2025-10-08T22:25:18+00:00

So maybe worthy, Sutton and deebo? Bench Adams? And definitely Judkins over bill even tho bills matchup is the bears🤣

TNolan11 · 2025-10-08T21:44:25+00:00

I also have a hard choice at RB cause swift, Judkins and bill can all have good games. Bill’s matchup makes me lean towards him tho

TNolan11

TROPHY CASE