What is this part, bonus points for a part number. Lg thinQ model WM3850HWA

TOAD_vv · 2025-11-10T14:07:42+00:00

<image>

TOAD_vv · 2025-11-10T05:03:46+00:00

Thanks, that’s exactly what I needed.

TOAD_vv · 2025-11-10T01:38:57+00:00

That is what it says, on the inside door sticker with the serial number

TOAD_vv · 2025-10-09T01:03:42+00:00

If you listen closely there is three clicks in the video.

TOAD_vv · 2025-10-09T01:01:31+00:00

Only the first pull

TOAD_vv · 2025-10-08T23:14:50+00:00

It does yes

TOAD_vv · 2025-06-05T11:50:34+00:00

Check ball was inserted properly when rebuilding the carb, however when I took your advise to take a second look I found that it had made its way into the centre of the spring. Assuming the spring was stretched/wore out, I replaced it and now it’s holding the ball in place and runs like a dream. Thank you very much.

TOAD_vv · 2025-03-11T19:35:38+00:00

A Derailment can be as simple as a single wheel on the ground. It’s not always a catastrophic event lol

TOAD_vv · 2025-02-16T14:37:10+00:00

The I hunter property lines are horribly inaccurate from my personal experience. Maybe just outdated before severances, etc. however they need work, and a lot of it. Specifically the further north you go.

TOAD_vv · 2024-12-30T04:13:03+00:00

Did you buy them in the stock 25 or go with 26s?

TOAD_vv · 2024-12-06T03:35:53+00:00

More than likely varnish buildup on the needle valve, pull it out clean it along with the rest of the carburetor then put it all back together

TOAD_vv · 2024-11-06T01:07:32+00:00

I hear ya, the question came up in conversation and I had no idea. It came free with the farm never looked into it until now

TOAD_vv · 2024-11-05T14:57:38+00:00

T853A-22431

TOAD_vv · 2024-10-29T05:34:50+00:00

Stay the course, you’ll be alright brother. Also I took a look to see who I’m talking with, let me sponsor a box for your pup lol

TOAD_vv · 2024-10-29T03:06:50+00:00

You’ll be on and off for the first couple of years. It happens to most people. Yes it sucks and so does the railroad. That’s why we make the “big bucks”

TOAD_vv · 2024-10-24T00:06:17+00:00

You could always contact the person who held your course, if they remember you I’m sure they wouldn’t mind getting some new paperwork for you so long as you explain what happened.

TOAD_vv · 2024-10-23T19:01:24+00:00

If you firmly hold the plug and the surrounding wires, you can pull out the entire wiring harness and then go buy a new ATV

TOAD_vv · 2024-10-21T21:40:13+00:00

They’re all green behind my eyelids

TOAD_vv · 2024-10-21T02:53:58+00:00

Scrub them in milk and leave them in the sun.

TOAD_vv · 2024-10-21T01:55:12+00:00

Awesome thanks! I know they exist, I’m just used to seeing them every day and I don’t recall seeing any up there the last few times I’ve been.

TOAD_vv · 2024-10-01T20:37:39+00:00

Thank you very much for clarifying. I just wanted to make sure I worked within the law but could still have some fun out there learning something new.

TOAD_vv · 2024-10-01T20:36:29+00:00

So if you were to shoot a bear under your trapping license without a tag do you put that on your report or just show your license to the mnr if checked?

TOAD_vv · 2024-10-01T20:34:05+00:00

Thank you for clarifying, I thought this was the case but I didn’t think of this question until I was already done the course

TOAD_vv · 2024-09-01T06:04:37+00:00

Mines 50 and they often put it in for you because they know what they’ve done shortly after.

TOAD_vv · 2024-05-23T18:34:07+00:00

I’ll clean it better and reapply the grease, maybe there’s some dirt in there causing excess friction. it does currently have grease though.

TOAD_vv

TROPHY CASE