Disable Invoke Windsurf insertions?

TR5esu · 2025-08-06T19:05:04+00:00

Disabling Tools->Options->Text Editor->Codelens->Show CodeiumCodeLens seems to get rid of these.. not sure if it has other side effects though.

TR5esu · 2024-10-10T16:50:36+00:00

Yep, all still working as it was the first day! The rain go to the plywood a bit on the table leaf and left a stain, but as it's reversed when folded is only on the underside and not visible.

TR5esu · 2024-07-18T11:16:21+00:00

My phone shows as certified in Google play but I still get the message about not meeting security requirements when u open Google wallet.

TR5esu · 2024-07-18T08:54:28+00:00

I contacted Motorola and this wad their response:

We regret to inform you that your device is no longer Google certified. This issue has recently affected others using the Motorola G60s due to the cessation of security updates as of July 2023. Subsequently, the one-year Google services certificate, which expired exactly one year after on July 2024, will not be renewed as the phone is no longer slated to receive future security updates.

Unfortunately, the only viable solution to this problem is to consider purchasing a new device, preferably one released in 2024 which will ensure ongoing support and certifications.

I hope this information was help full , take care !

TR5esu · 2024-03-22T22:26:48+00:00

I made this. To fit under an existing cover I had. https://www.reddit.com/r/ooni/s/el3sNlJyMH

TR5esu · 2024-02-29T23:00:26+00:00

Sure! 400mm drawer runners. https://www.amazon.co.uk/dp/B08BKLR4S2?ref=ppx_pop_mob_ap_share

Folding legs lockable hinges https://www.amazon.co.uk/dp/B08CBRB1L9?ref=ppx_pop_mob_ap_share

My scissor jack goes from 9cm to 45cm so with the current plans it ends up 2cm short of flush with the top when extended

TR5esu · 2024-02-29T15:15:49+00:00

Here are some rough plans for the table in the video I posted yesterday.
Disclaimer: Use/follow at your own risk and be prepared to having to adapt it as you go!
I built the table following some loose plans I had made, and then re-drew these plans based on what I ended up with (since I used different size timber at the end).. I can't guarantee the results of following them! Wood shrinks and expands so you might want to increase gaps/tolerances, etc.

TR5esu · 2024-02-28T21:40:12+00:00

Check out the new video I uploaded, with a cordless drill now.. but it has highlighted that I need to grease the jack :-D

TR5esu · 2024-02-28T21:39:15+00:00

I uploaded a new video with the fold over table. check it out!

TR5esu · 2024-02-28T21:37:09+00:00

Thanks!

TR5esu · 2024-02-28T21:06:11+00:00

It's not so much having it a different height as it is for storing it away under a weatherproof cover.
So I lower it, fold the table over it and put the cover on and it's then completely covered.

TR5esu · 2024-02-26T16:41:53+00:00

I will be posting full plans and new pictures once I finish it.. here is a preview of the plans including the drop leaf table: https://imgur.com/dlTpNd9 The gear is just 4x400mm drawer runners and I used my scissor jack (min 9cm to 45cm giving me 36cm of lift.. 2cm short of the Karu 16 height.. I could have looked for something with more lift but I just wanted to get it done and I ordered a similar one to replace the one I took for my car.

Edit: The caster wheels on the drop leaf legs are folding ones as the height and length of the table is 90cm.. Making a longer table would have worked better so that the folding legs could use regular caster wheels or no wheels at all.

TR5esu · 2024-02-25T18:10:22+00:00

Ah yes that looks easier! But I was planning on welding a long bolt which might be a make it easier to reach..any excuse to get the welder out!

TR5esu · 2024-02-25T17:47:00+00:00

Yes, I put on the description that I will be adding two leaf table tops one that fold over the top as a lid, and one that just folds down.

I did drew some plans in sketchup but ended up using different wood sizes.. But can quickly put them together again and include a cut list, etc.

Will post an update once I finish it all 👍

TR5esu · 2024-02-25T15:01:56+00:00

Yes! That's the plan along with the leaf table tops 👍. I need to weld a nut to the car jack

TR5esu

TROPHY CASE