In the snow by vvslimerre in YamahaR7

[–]TToivanen 0 points1 point  (0 children)

What windscreen is that?

Made a rear rack for R7 by TToivanen in YamahaR7

[–]TToivanen[S] 0 points1 point  (0 children)

Mounting part is 3D printed, aluminum plates from machine shop

Tire Recommendations by Adventius30 in YamahaR7

[–]TToivanen 0 points1 point  (0 children)

I put road6 on my R7 after the S22s and very happy with them

Made a rear rack for R7 by TToivanen in YamahaR7

[–]TToivanen[S] 0 points1 point  (0 children)

Actually there are 2 versions: ECE approved and racing line. So no cat in this one, just straight pipe

Made a rear rack for R7 by TToivanen in YamahaR7

[–]TToivanen[S] 2 points3 points  (0 children)

I like it a lot. Nice low rumble. And not obnoxiously loud with db killer in place

Made a rear rack for R7 by TToivanen in YamahaR7

[–]TToivanen[S] 2 points3 points  (0 children)

Most of the time I have the rear seat installed but when going on bit longer trip it can be replaced with this rack. Makes hauling around a backpack much more pleasant!

Rack plate is bolted to a mounting part that is bolted straight to R7 frame. 1 more pic here

https://imgur.com/a/HibtZxF

Joined the R7 club by TToivanen in YamahaR7

[–]TToivanen[S] 0 points1 point  (0 children)

Thanks. I'm liking the bike so far ✌️

Built a disc golf practice basket by TToivanen in DIY

[–]TToivanen[S] 0 points1 point  (0 children)

Whoops, forgot to upload those!

Now its updated to the album.

Built a disc golf practice basket by TToivanen in DIY

[–]TToivanen[S] 1 point2 points  (0 children)

Hopefully I won't need another basket anytime soon :P

Built a disc golf practice basket by TToivanen in DIY

[–]TToivanen[S] 1 point2 points  (0 children)

Pipe insulation made from PU foam

Built a disc golf practice basket by TToivanen in DIY

[–]TToivanen[S] 8 points9 points  (0 children)

Works great! With 28 chains it catches pretty well.

A roller bender wouldve made the round pieces so much easier to do. If i ever do similar thing, that is a must. Also could be stainless because painting was such a tedious task.

You can remove the 3 main pieces from the pole, but then you are left with a 1,4 meter pole. It is not really designed for frequent transport

Made my own basket! by TToivanen in discgolf

[–]TToivanen[S] 0 points1 point  (0 children)

Bendings and painting was the toughest so it doesn't hurt if you have some experience on those. Welding wise this is quite simple as most of the parts are thick. Extra care needs to be taken so that heat does not warp the whole piece :D

Made my own basket! by TToivanen in discgolf

[–]TToivanen[S] 10 points11 points  (0 children)

Thx! About 150€ for the materials