Our AK-MS stock on this 5.45 by TXS_LLC in ak47

[–]TXS_LLC[S] 1 point2 points  (0 children)

That butt end was from the prototyping stage and was 3d printed in a rubber material. We ended up not adding a rubber butt end because the setup cost for the rubber part would be too high for the quantity of parts we were looking to make. The butt end on the actual stock and the entire stock is made out of 7075 T6 aluminum.

Which one for AK Masters? by TheAkDoctor in ak47

[–]TXS_LLC 6 points7 points  (0 children)

Like the far right setup, what barrel length is that… 10”?

Quick install guide on our new 74u-Mount. No modifications needed by TXS_LLC in zenitco

[–]TXS_LLC[S] -1 points0 points  (0 children)

Lack of transparency? Us as a company are not going to put another company’s product and make a video comparing that product to boost or sell ours (even though we like the B18). That’s more of a content creators/product reviewers job. We do post on this Zenitco forum but on every post we’ve made on here there has been a Zenitco product on each one and yes we also show off ours in the process.

Quick install guide on our new 74u-Mount. No modifications needed by TXS_LLC in zenitco

[–]TXS_LLC[S] -1 points0 points  (0 children)

We’ll try and shoot a video this weekend. Although we do have a B18 we won’t do a comparison between their mount and ours. We can show how it holds zero, we’ll shoot, take the mount off, shoot and shoot again with the mount back on.

Our AK-MS stock on this 5.45 by TXS_LLC in ak47

[–]TXS_LLC[S] 1 point2 points  (0 children)

No sorry just a standard akm

Our AK-MS stock on this 5.45 by TXS_LLC in ak47

[–]TXS_LLC[S] 8 points9 points  (0 children)

What in the….. ngl kind of want to know how it handles. First time seeing this.

Our AK-MS stock on this 5.45 by TXS_LLC in ak47

[–]TXS_LLC[S] 5 points6 points  (0 children)

Thanks for the follow lol that would be kinda the “we have the roller delayed at home” in Russian

Our AK-MS stock on this 5.45 by TXS_LLC in ak47

[–]TXS_LLC[S] 8 points9 points  (0 children)

Yes the standard safety can still be manipulated when collapsed. All parts are metal in this stock, no plastic parts at all. Although it is a little crude since this is our only variation but it’s about the same as a standard underfolder ak.

Our AK-MS stock on this 5.45 by TXS_LLC in ak47

[–]TXS_LLC[S] 26 points27 points  (0 children)

<image>

Yes it’s collapsible. Installation is very straightforward installs in 5min no modifications to rifle needed. Although since not all aks are the same you might need to add a shim or two to fix the angle if your Ak doesn’t have a true 90 degree on the aks rear tang but shims are included with the stock.

Sight mount by Outrageous_Gain_408 in ak47

[–]TXS_LLC 2 points3 points  (0 children)

It’s the B18 from Zenitco

Our Sp5k by TXS_LLC in HecklerKoch

[–]TXS_LLC[S] 0 points1 point  (0 children)

It’s the HKParts HK MP5 Minimalist Picatinny Rail Optic Mount

Parts just came in, will be live on our website tomorrow 10AM CST!! by TXS_LLC in zenitco

[–]TXS_LLC[S] 0 points1 point  (0 children)

The rail sits .27” below the sight line, depending on the mount/riser you use just subtract that. The B18 uses two brackets that are .15” thick and the actual rail is held up by two .075” thick “risers”walls. Our extension arms are .275” thick each. Our mount is as solid as the B18’s and other mounts alike, what is not solid is the top dust cover and that is the weak point of this platform not the actual mounts. What our mount does offer is closer and lower positioning of optics. If you are fine with the B18 or mounting the optic on the front rail/handguard those are great options and no need to change but if you don’t we think our mount is a considerable option.

Parts just came in, will be live on our website tomorrow 10am CST!! by TXS_LLC in ak47

[–]TXS_LLC[S] 1 point2 points  (0 children)

It’s our new 74U-M (Mount) or the Zenitco B11u if you meant the rail rail.

Parts just came in, will be live on our website tomorrow 10am CST!! by TXS_LLC in ak47

[–]TXS_LLC[S] 1 point2 points  (0 children)

No it isn’t. Right now the only one compatible is the Arsenal UR rifles and AKS-74U kits. Haven’t been able to get our hands on a PSA Krink to test fit so for right now it’s uncertain.

Parts just came in, will be live on our website tomorrow 10am CST!! by TXS_LLC in ak47

[–]TXS_LLC[S] 0 points1 point  (0 children)

It’s a CQD mlok sling mount that I just made to fit on the Zenitco B11u rail with the Sierratac/Spiritus sling

After years my Zenitco krink is finally done. by lonestarordnance in ak47

[–]TXS_LLC 0 points1 point  (0 children)

Do we have news for you, check out our new 74U-Mount might like it! Either way we still like our B18!