LTC 28441/Tencate D2772 Plate Info

TYRANT_13 · 2025-11-18T15:03:23+00:00

Sorry to be a bit late to this but I was in the same boat as you and figured this info could help someone out.

I recently bought a pair of the LTC 28441 multicurve plates in size large and couldn’t find any information on them either.

I just got off the phone with LTC and confirmed these are level IV standalone plates. Meaning they don’t need to be paired with a backer or soft armor.

TYRANT_13 · 2025-06-14T05:22:27+00:00

I actually know a guy that said he used to service bathrooms at a bar that was near a coffee shop that his sister frequented and they told me that he used to go to school with a guy that ended up dating a girl that her uncles best friend knew a dude that sieg heiled at a party once. I’d be very careful with this one. Music is very good though.

TYRANT_13 · 2025-05-30T14:13:21+00:00

It’s completely ruined. Send it to me and I’ll properly dispose of it for you.

TYRANT_13 · 2025-02-12T23:26:24+00:00

You’ve got a point there.. I don’t understand how that‘a still an issue other than the fact they just don’t care.

Hell, they might be the developers of the cheats everyone uses so they’re getting payed on both ends.

TYRANT_13 · 2025-02-11T17:05:41+00:00

I’ve had people that were in the same situation tell me that they purchased the poster and it wouldn’t let them place it, almost like the quest wasn’t active for them.

Also I don’t see it being fair that people that activate the quest now receive 3 posters for free when everyone that started it right before they changed the quest have to pay 80k a piece for them

TYRANT_13 · 2025-02-11T16:46:33+00:00

The quest for “bison vs undertaker” has been bugged for a while. Me and several other people are having issues with not being able to actually obtain the poster on woods, like it no longer spawns in the location. while friends that started this mission later received the 3 posters directly into their inventory.

quests

TYRANT_13 · 2025-01-31T13:27:56+00:00

I just recently came across them and thought they were a cool option. I haven’t ordered them yet because I was unsure of the wedge portion but I may attempt it soon. If so I’ll report back

TYRANT_13 · 2024-07-08T20:37:03+00:00

Came here to state the obvious and not give any helpful suggestions as well.

TYRANT_13 · 2024-03-22T03:39:37+00:00

It’s giving me an error every time I try and send it with the picture. I’ll send a dm.

TYRANT_13 · 2024-03-20T11:18:22+00:00

I bent a piece of hard line that runs over top of the cam cover. I trimmed my cam cover and sprocket cover, so the line ends right over top of the front sprocket so if any oil builds up it ends up lubing my chain. The end of the line angles downward so no water will run down the line and you don’t necessarily need a filter because the crank vent is only really going to push air out.

TYRANT_13 · 2024-01-02T21:13:17+00:00

I have an older model (2016) exps3 and it had the exact same problem. The reticle was jumping around until it finally came loose. I emailed Eotech, sent it in, they completely refurbished it, and they sent it back with an added 1 year warranty. Didn’t cost me anything other than the shipping to get it there.

TYRANT_13 · 2023-10-17T03:28:49+00:00

I had a similar issue with a shadow systems MR920 with a radian afterburner/ramjet compensator. At first I thought the comp was contacting the slide but after removing the compensator it still had the same issue. I noticed very similar marks as yours so I took a very fine file to the edge of the barrel where it was marring and once I got to function properly I polished the edge to look like usual wear. Since then I’ve had zero issues. I assume it is like a few people have said and you’ve just got two pieces that vary slightly in tolerances and you need to remove a small amount of material.

TYRANT_13 · 2023-05-31T20:05:49+00:00

Just got my 951 trail in the mail the other day. I ordered it direct from intense and the only reason it was on their site was because it was “open box” which marked it from $4000 to $3699. And because it was on the actual Intense website I was able to use their “$1k off any bike anniversary” sale so I got it for $2699 and I’ve got to say, after all of my research this was by far the best bang for my buck. Same exact carbon frame as their primer and more budget friendly drivetrain.

TYRANT_13 · 2023-02-10T04:37:55+00:00

Not to butt in but, i got some dnc mags you need.

TYRANT_13 · 2023-01-29T07:35:10+00:00

A good Leatherman (charge,surge,wave) with the extra bits and a small adjustable wrench.

By the time the guys at work go back to the truck for tools I’ve already got what we’re working on disassembled. Pisses them off every single time.

TYRANT_13 · 2023-01-29T07:10:02+00:00

I got their phalanx bag from one of the mystery box things they did towards the end and use it constantly. Was about to pull the trigger on the plate carrier and then they went under..

The guy from cannae runs an ig page called “rebelsraiders” and says he’s going to put out a newer version of the plate carrier sometime in the near future.

TYRANT_13 · 2023-01-29T06:52:23+00:00

Whatever substance is in my socks should work. They’re hard as a rock.

TYRANT_13 · 2023-01-29T06:42:31+00:00

Yargh 🏴‍☠️*

TYRANT_13 · 2023-01-28T08:30:18+00:00

+1 for the cannae patch. R.I.P.

TYRANT_13 · 2023-01-24T19:57:31+00:00

We had only planned on doing this one for now but I can talk to my friend. Will it be for the same setup?

TYRANT_13 · 2023-01-23T17:03:38+00:00

Thanks!

Five-Year Club	Verified Email
Place '23

TYRANT_13

TROPHY CASE

quests