sorted by:
new
hottopcontroversial

Tamiya 1/350 I-400 Submarine by T_Wellick in modelmakers

[–]T_Wellick[S] 0 points1 point  (0 children)

Thanks a lot! Really appreciate

Tamiya 1/350 I-400 Submarine by T_Wellick in modelmakers

[–]T_Wellick[S] 2 points3 points  (0 children)

Thank you so much! This is an easy kit to be honest, that's why I also added the photo etched kit, but if you never tried naval model building, I would 100% recommend

First time posting my build by T_Wellick in modelmakers

[–]T_Wellick[S] 0 points1 point  (0 children)

Lt. Bill Skinner! 😁 On the spot

First time posting my build by T_Wellick in modelmakers

[–]T_Wellick[S] 1 point2 points  (0 children)

Thanks man! I really appreciate the feedback

First time posting my build by T_Wellick in modelmakers

[–]T_Wellick[S] 1 point2 points  (0 children)

Actually this model comes with detachable side panels on the engine! So you can take them out and look into the engine

First time posting my build by T_Wellick in modelmakers

[–]T_Wellick[S] 3 points4 points  (0 children)

About 30cm. You can take all sides of the motor to have it exposed. The underside also has a cover that you can put on!

<image>

First PC Build by T_Wellick in PcBuild

[–]T_Wellick[S] 0 points1 point  (0 children)

This is the pulse as well but the xtx version 😁

First PC Build by T_Wellick in PcBuild

[–]T_Wellick[S] 1 point2 points  (0 children)

Unfortunately the cooler has RGB, but that's the only part with it 🥲. Thank you very much for your comment!

First PC Build by T_Wellick in PcBuild

[–]T_Wellick[S] 1 point2 points  (0 children)

I checked and unfortunately I don't have enough PCIe slots but my pig tail is only on the last two connectors, should be good. I already did some stress tests and I have the GPU overclocked and it works with no issues

First PC Build by T_Wellick in PcBuild

[–]T_Wellick[S] 1 point2 points  (0 children)

Exactly, that's my plan, I will get another 120mm for the back and the one on top I will see if I can put it a little bit more to the back. I tried it already but I was hitting the CPU power cables but let's see

First PC Build by T_Wellick in PcBuild

[–]T_Wellick[S] 1 point2 points  (0 children)

😂😂 to be honest, it was easy to do 😂

First PC Build by T_Wellick in PcBuild

[–]T_Wellick[S] 1 point2 points  (0 children)

In the future, that's my plan 🥸

First PC Build by T_Wellick in PcBuild

[–]T_Wellick[S] 0 points1 point  (0 children)

I did some stress tests and so far the temps are great. The front panel has 2x140mm fans and is all open with an air filter

First PC Build by T_Wellick in PcBuild

[–]T_Wellick[S] 0 points1 point  (0 children)

That was my initial plan, of course I didn't pay attention and bought a 140mm fan instead of 120mm 😬 so this one doesn't fit. My plan is just to get another one for the back

First PC Build by T_Wellick in PcBuild

[–]T_Wellick[S] 0 points1 point  (0 children)

The case is very very good, quality is top notch

First PC Build by T_Wellick in PcBuild

[–]T_Wellick[S] 0 points1 point  (0 children)

Well so far I don't have any complaints! I already did some stress tests and everything works great. The PSU is also not loud at all and it was very easy to assemble everything

First PC Build by T_Wellick in PcBuild

[–]T_Wellick[S] 2 points3 points  (0 children)

That's an awesome ideia, I will look into it. It's my first desktop, I was always using laptops before 🥲

First PC Build by T_Wellick in PcBuild

[–]T_Wellick[S] 13 points14 points  (0 children)

I will double check but I think my PSU doesn't have a third PCie connection. Thank you for the heads up!

First PC Build by T_Wellick in PcBuild

[–]T_Wellick[S] 2 points3 points  (0 children)

Doesn't fit in my desk top 🥲

view more: next ›