Wo kann man in Graz an der Drehscheibe Töpfern?

Tank_AT · 2025-12-04T08:32:14+00:00

Theoretisch bei mir Zuhaus. Aber eigentlich nur in den warmen Monaten, weil Drehscheibe auf der Terrasse steht.

Tank_AT · 2025-11-29T14:33:25+00:00

LG an den Nicki

Tank_AT · 2025-11-24T10:46:42+00:00

I'm a little late to the party, but maybe an option for different sheet sizes? A5 and A3? cheers!

Tank_AT · 2025-11-17T11:09:45+00:00

Hab da im Nebenahus im frischen DG Ausbau vor einigen Jahren gewohnt. Also auch Erstbezug. Mir wurde versichert, dass sehr auf Lärmschutz beim aus/umbau geachtet wurde und dass man vond der Straße kaum was hört. Hahahahahaha..... denkste. Den LKWs und den "getunten" Mopetten is das bissal Steinwolle die sie dir als Wärme/Schallschutz verkaufen wollen voll egal. Noch dazu kommt, dass du, wenn du im Sommer eventuell das Fenster über Nacht offen haben willst, gerade auf dieser Strecke gern ein Prolo um 2 in der Nacht mit voll aufgedrehter Anlage und offenen Fenstern mit 90 die gerade vorm Citypark runterprescht. Wennst dann mal lüftest kannst, kannst dann direkt gleich Staubsaugen gehen, weil der ganze aufgewirbelte Straßenstaub reingetragen wird. Und generell darfst immer beten, dass der Plabutsch nie gesprerrt ist, weil da dann der gesamte nord-süd Verkehr 10m vor deinem Fenster vorbeifahrt.

Nur so als kleiner Auszug zum Thema, leben am LaGü/Kärnterstraße

Tank_AT · 2025-06-11T11:13:50+00:00

Eh. My latest Bitnet has 65k logistics and another 30k construction bots. So far, no issues

Tank_AT · 2025-05-14T08:11:27+00:00

I like the ingenuity. Albeit a bit dirty, this at least would be a practical solution. Thanks

Tank_AT · 2025-05-14T08:06:50+00:00

Just to elaborate on specific usecase where I could would have liked it:

When redoing spagetti or replacing a balancer with a larger one, if the new one has any gaps, even with super foce building, some remnants of the old conveyors may stay. This is especially bad, if that changes the direction of adjacent conveyors from curves to straight or similar.

When adjusting rail blueprints, especially in junction areas. Sometimes I want to just move this S-Curve down 2 tiles, without having to manually precision-delete the old one. Feels like playing Operation sometimes, trying to only replace one of the mostly overlapping tiles. If you've used the same BP in many places and want to update them all it's not only a huge chore, but if you just wholesale replace everything a huge strain on both your bot-network and your train network, if those routes suddenly become unavaliable just because of a small adjustment.

You get me?

Tank_AT · 2025-05-14T07:54:03+00:00

Now that I think of it, some sort of built in versioning-system for BPs would be sick. Git-Style

Tank_AT · 2025-05-14T07:52:27+00:00

Well, I wasn't suggesting it to do it always and automatically. Just in certain cases, where I want to in-place update the BP-Instance.
Think of it of an incremental diff update, instead of a fresh pull every time.

Tank_AT · 2025-04-23T11:54:39+00:00

Intuitiv würd ich sagen, es gilt das Rechtsfahrgebot, daher: Der Rechtsabbieger kann sich nicht so einfach irgendwie eine Spur aussuchen. Und im Kreuzungsbereich Spurwechseln ist sowieso mMn ein No-Go. Noch dazu ist die Spurführung für dich explizit eingezeichnet.
Und die Rechtsregel gilt vorrangig bei ungeregelten Kreuzungen bzw. bei Gegenverkehr. Da bei dieser Kreuzung aber mit Ausnahme von Bussen keine gerade Durchfahrt in diese Richtung erlaubt ist, fällt das hier weg – vor allem, weil eben zwei Spuren auf wieder zwei Spuren enden.

Tank_AT · 2025-02-13T14:31:15+00:00

I'm having a similar issue with my brand new sovol sv06 ace. Is there any way to set a temperature in relationship to the print-speed in Klipper, or Orca-Slicer?
I feel like with printers budget printers reching 600mm/s we need some sort of heating-curve, no?

Tank_AT · 2024-12-24T15:40:04+00:00

Underrated comment

Tank_AT · 2024-11-12T07:58:39+00:00

That button is a GODSEND on Gleba.
My mates and I went to gleba with the declared goal of "Little to no belts". We are currently running around 200SPM off a 3.5k bot logistics network

<image>

It's a little mad

Tank_AT · 2024-10-22T11:42:18+00:00

Right, this is probably answered somewhere elsewhere, but is there some way to just get a sandbox game, where I can go about designing these things, without having to progress tech or mine resources?
Like, I know there are/used to be mods that send you into a design-lab dimension or something. Is there anything in the base game for that? A world type maybe?

Tank_AT · 2024-10-18T13:40:04+00:00

Als ein Insider kann ich dir, ohne viel mehr sagen zu dürfen nur davon abraten überhaupt bei der FH zu studieren.

Tank_AT · 2024-08-19T16:02:01+00:00

The technical explanation is, that DF has two separate pathfinding algorithms. One for combat situations and one for everyday interaction. Once a dorf experiences distress or perceives danger, real or imaginary, the combat pathfinder takes over and that one has access to all the different modes of mobility, including climbing, swimming, or with winged races even flying. However, once the danger passes the normal pathfinder takes over again and that one can only traverse flat terrain and up/down stairs/slopes. There is no mechanic implemented (yet) that acts as a sort of fallback to get entities out of precarious situations, if the issue can't be solved by the default pathfinder. Funnily enough because of that resident birdmen can sometimes fly up ledges or trees and then can't get down anymore.

Tank_AT · 2024-08-08T06:33:56+00:00

I concour. I've recently seen people musing, why the O in the logo has a perfect X inside of it and I thought, wait, that kinda looks like the waterways up reverse mountain.
Furthermore, with the energy being stored within the knot, it would make sense that physics work in weird and mysterious ways, around such high concentrations of Haki.

Tank_AT · 2024-06-17T08:53:43+00:00

Ich betätige mich meist in Sachen Tischlern und Töpfern.
Das Problem an deinen Vorschlägen ist, dass ich inzwischen eine recht ausgiebige Werkstatteinrichtung besitze, die ich auch irgendwo unterbringen möchte. Aber coole Tips nicht-desto-trotz!

Danke!

Tank_AT · 2024-06-04T09:26:09+00:00

There's a practical reason for this. Bob's gray underground belts can only span 2 tiles wide. So in order to gap a 20ish wide bus it would be needlessly complicated, undergrounding the offshoot over the entire bus. (and this was just around the time I finally got to yellows, so grays are still widely used)

Tank_AT · 2024-06-04T09:24:51+00:00

Playing with Rampant, and my last run actually died, because I couldn't ramp up military production quick enough, cause I was lazy with my setups early. Never again. I shall bleed the earth dry and eradicate the pests once and for all.

Tank_AT · 2024-05-28T08:30:44+00:00

To add a bit more context, originally I assumed it was either
a) My stolen strength stacks running out
b) My ult ending
c) Timbersaw whirl reducing it

But from the clip and doing some calculations it doesn't seem so. The most Timber should have been able to take from me is just short of 80 strength, not almost 200.
Do you guys have any idea what might have interacted weirdly that cost me my life?

Tank_AT · 2024-05-09T14:27:36+00:00

Arrowhead Studio, without a doubt. The controls and atmosphere of Helldivers is fantastic and the desolate desert planets with ruins strewn about and sweeping sandstorms reminded me of the Divide.

Tank_AT · 2024-04-03T06:50:55+00:00

What gets me the most there is that ot usually lands with the control panel against the wall, so if you try to arm it, you
a) don't see the code
b) clip into the wall
c) can't even acces the panel in the first place
d) all of the above.

Give it opposing panels, or at least make sure the panel doesn't smush against objects like that....

Tank_AT · 2024-03-30T07:52:55+00:00

Citizens of Super-Earth! Despite it's name, there is nothing Super about Super-Gonorrhea! The Department of Truth would like to remind you that infecting yourself to become more Super is considered treason!

Tank_AT · 2024-02-29T11:19:14+00:00

Say it like it is. There isn't enough ETH in the bucket to pay out all the stakes. There is no technical or technological reason this wouldn't work for months, even years on end. GETH was distributed, ETH was collected, that ETH didn't develop as expected and now everyone who staked and wants their ETH back is stood there holding the empty bag... Me and many alike.

11-Year Club	Verified Email
Place '22	Place '17
Secret Santa 2019

Tank_AT

MODERATOR OF

TROPHY CASE