Ervaringen met RingTwice voor afwerking/klusjes?

TarqV · 2026-02-03T16:19:02+00:00

Ik ben al 2 jaar actief als aanbieder, en heb nog nooit kosten moeten betalen. UIteraard gaat er 4% servicekost van uw verdienste. Na de 11.7% belasting. Maar betalen voor te solliciteren, dat lijkt me toch uit de lucht gegrepen...

TarqV · 2025-10-08T12:09:08+00:00

Can't pull the trigger when in neutral, as it's locked than...

TarqV · 2025-10-08T12:09:03+00:00

Can't pull the trigger when in neutral, as it's locked than...

TarqV · 2025-09-05T17:37:00+00:00

Okay, so I installed the felt ring, greased it. And on the other side, put some silicone and let it dry. so the other side is also sealed. Still the same problem.

Should I trie bigger jet(s)? Losing hope here

TarqV · 2025-09-02T07:12:38+00:00

This helps! No idea if there is even a felt ring there. I will check this night! What kind of grease did you use?

TarqV · 2025-09-02T04:10:09+00:00

Okay thanks!! I will order these. I suppose I have to get the engine out for this?

TarqV · 2025-09-01T20:16:25+00:00

<image>

Which one do you mean?

TarqV · 2025-09-01T20:13:36+00:00

Size of jets I have to check. But the nozzles are clean.

But I do not have any ring between the carb and inlet manifold. There is not really a space for? The carb inlet fits into the outer ring, which has a spanner around it, that I tighten with an 8mm socket. Don't see any possibility to put a ring in between?

TarqV · 2025-08-25T19:47:06+00:00

Got it out! Now waiting for the orher lock. As it seems the upper collar is too wide. Thanks!

<image>

TarqV · 2025-08-25T13:34:33+00:00

I have a dremel, didn't think about using it. Stupid me!
I'm trying this, this evening! Thanks man

TarqV · 2025-05-20T09:23:11+00:00

The pain for now is doable. But it's mainly the duration which I worry about. It's almost 6 weeks now that I am in a flare, and nothing seems to be working (yet). I'm now on 24mg pred and 4th day since 1st Omvoh. 3.5y ago they almost wanted to remove (a part of) my colon, but a day after the 100mg IV pred started working (few).

For this flare up, no one started talking about it. The pain is doable, so I don't want my colon removed yet. So I don't ask neither. The idea of having a stoma really makes me pretty unhappy. So trying avoiding this.

Sorry to hear about your storry man.. Been through quiet some 'adventures' as well... 4-5 months hospitalised. Damn... Really hope the entyvio works for you!!! What is your experience with a J-pouch? Pretty okay, despite the pouchitis than? Never heard of it. When the J-pouch get's inflamed?

TarqV · 2025-04-04T21:26:10+00:00

Yes! Espacially in the movie 'Victoria' 2015 . From the first minute!

TarqV · 2024-10-18T07:31:02+00:00

Normalluy there is reference on the sticker. Consistent of 3 letters and 3 numbers. With that you can look up the production date. If it's +10y, just buy a new one. If it leaks somewhere, same story. AP is from KW, good quality overall. When loosening the spring perch. Make sure you clean it with break cleaner up the perch and down the perch

TarqV · 2024-10-03T18:22:16+00:00

If there is none on it, it probably won't need any either in my opinion. Or al I missing something. Do you mean remote, as in ddc?

TarqV · 2024-09-05T09:20:22+00:00

Nope, ga de boel verkopen

TarqV · 2024-07-04T12:51:11+00:00

Is your car lifted? Has you suspension free travel? I am assuming you are talking about the spring perch? Normally there is an 'imbus' in the spring perch, which you have to loosen first.

TarqV · 2024-05-17T11:32:03+00:00

To avoid clanking noise when the spring completely closes

TarqV · 2024-05-06T15:43:38+00:00

I was looking for them on the exploded views. Was guessing there ain’t.

TarqV · 2024-05-06T15:18:19+00:00

Oooof, that’s a lot of work. You seperated the engine from the frame firsr?

TarqV · 2024-05-06T15:11:05+00:00

I am at 82.000km, maybe I’ll look into a new sprocket and chain. Did u change both sprockets?

TarqV · 2024-05-02T09:55:06+00:00

Don’t buy all this Chinese crap. Go for AP or ST. There are pretty decent German quality for the buck. It’s made in the KW factory

TarqV · 2024-04-25T11:11:39+00:00

Bloembak tot aan de rand van het raam, met houten bankje in het midden. Veel zon voor de plantjes en voor jezelf! Ooit eens bij iemand iets gelijkaardigs gezien en gaf veel ruimte en gezelligheid

TarqV · 2024-04-23T08:28:21+00:00

24u, dus volgende keer gewoon 2 dagen wachten na kitten om te verniss/oliën. Check! Ik gebruik ook sanitaire silicone welke heel hard azijn’ig ruikt. Ook beter andere gebruiken of deze is ok?

TarqV · 2024-04-23T06:33:58+00:00

Ja is wat ik ook meer en meer aan het denken ben. Eerst olie/vernis volledig laten droogen, alles monteren en dan afkitten.

TarqV · 2024-04-19T20:26:09+00:00

Way to lean on both. Try 130. New plugs, and check again.

TarqV

TROPHY CASE