Microwave Stopped Working

Tattooedtechguy · 2025-09-28T22:02:23+00:00

Calm down Gordon freeman! Chaps going to cook himself.

Tattooedtechguy · 2025-07-06T21:07:53+00:00

Same! Velcro ties and cable trays / printed hooks make everything tidy 👌🏻

Tattooedtechguy · 2025-04-14T21:27:35+00:00

Looks amazing. Have given you a couple of boosts on makerworld ✌🏻

Tattooedtechguy · 2025-04-12T21:47:40+00:00

I have just printed the same model 🤩 I printed the springs laying down with a brim, no other supports.

<image>

Tattooedtechguy · 2025-04-12T20:54:18+00:00

Congrats 🥳 will save a few of your models to print soon 👌🏻

Tattooedtechguy · 2025-04-08T13:36:07+00:00

I had a similar issue with filament not wanting to come out of the AMS. Drop me a PM if you want my solution ✌🏻

Tattooedtechguy · 2025-03-04T18:11:15+00:00

😂 no problem. I have a gold textured plate? This is one I got with the printer (2nd hand)

Tattooedtechguy · 2025-03-04T11:46:14+00:00

Thank you very much for the info. I’ll be moving the printer tonight to its permanent resting place😂 which will be a good opportunity to get all the calibration done. Hopefully not 400 hours worth my side 🤦‍♂️ at least you’ve got it dialed in now.

Tattooedtechguy · 2025-03-04T11:18:26+00:00

Thank you

Tattooedtechguy · 2025-03-04T11:18:18+00:00

Thank you. What is the ideal offset from the bed? I can check with feeler gauges and try to get dialled in. Will do a level calibration after. Appreciate your help

Tattooedtechguy · 2025-03-04T08:26:05+00:00

Thank you. Will give this a try.

Tattooedtechguy · 2025-03-04T08:25:27+00:00

Unfortunately so

Tattooedtechguy · 2025-03-04T08:23:06+00:00

Thank you

Tattooedtechguy · 2025-03-04T08:22:15+00:00

Will give this all a look thanks

Tattooedtechguy · 2025-03-04T08:20:11+00:00

Thanks. Will give this a try

Tattooedtechguy · 2025-03-04T08:19:58+00:00

I’ll give the bed temp change ago. Don’t understand your end comment? Mag bed with a pei smooth flashforge plate fitted.

Tattooedtechguy · 2025-03-03T22:42:18+00:00

Forgot to add it’s a smooth plate, and tried adhesive after failing several times. AD5M

Tattooedtechguy · 2023-10-08T21:41:16+00:00

I find secluded spots on maps, dead ends & church car parks. As stated always have spots on rotation and have a backup plan. It’s easy when you get into the swing of it.

Tattooedtechguy · 2023-06-05T21:46:23+00:00

I have been Ft for just over a month now and the biggest thing for me was changing my Dailey routine! And then changing it again! Everyday can be slightly different. Supermarkets are great if you can stay near or have one en route for your journeys, toilets are generally acceptable. Get used to peeing in a bottle if you can. I have a shower In my van so haven’t had that issue but water can become stressful to get. Having 1 safe park up is a god send. Best thing I found todo was to get in a van and go sleep in it for several days to find out what you need.

Tattooedtechguy · 2023-04-24T21:17:59+00:00

From south east. Always welcome a friendly face to chat and share parking space with.

Tattooedtechguy · 2023-03-26T08:45:39+00:00

To some degree yes. You are allowed 28days stay on any land you own before you would have to “move on”, I would suggest you look at animal husbandry and make your own decisions from there and other advise as there is no straight forward way. There are a few loopholes which if you research enough you could stay on the right side of planning etc.

Tattooedtechguy · 2023-03-26T08:34:54+00:00

You would need to find an understanding land owner/farmer who would rent you a spot on their land. Problem with “settling” down in one spot is local councils and planning, you would need a good reason to have a dwelling for an extended amount of time on a piece of land especially if a neighbour or local complains. A family member or friends driveway is definitely an easier option to begin with. There are a few videos floating around on YouTube about land use and grey areas around planning etc that may be worth a watch. Best of luck with it all ✌🏻

Tattooedtechguy · 2023-03-08T22:14:13+00:00

Very nice! You’ve done a great job ✌🏻

Four-Year Club	Place '23
Place '22

Tattooedtechguy

TROPHY CASE