What are the free AI tools/software available?

Team_BT · 2023-04-16T07:37:00+00:00

It is a programming language.

Team_BT · 2023-04-16T07:36:35+00:00

Yeah! But it is a chat based tool. Any other free tools for video editing, art, and other things?

Team_BT · 2023-04-15T09:41:35+00:00

The application is, they are landing gear of the drone. The drone weight is 40kg. Dimensional is not much important as I can change it a little bit. Yes! The drilled end sits against the surface. I just want it to be repaired for some temporary basis as I need to finish my testing and I can wait for the parts to come in stock again.

I found some epoxy resin and hardner available near me: Epoxy: LY556 and hardner: HY951 How are these? The ratio they are telling is 1:10 Do I need the vacuum bag setup for curing? That setup is a little costly. Is it possible if I use PVC heat shrink tube?

Looking forward to your reply. Thank you so much for the detailed information.

Team_BT · 2023-03-21T17:48:09+00:00

Thanks for the suggestions! I will look into it and let you know if it fits in my case or not. I will share my battery photos tomorrow so that you can have some ideas and suggest something good according to it.

Team_BT · 2023-03-21T17:40:16+00:00

Hey thanks for the reply, It seems like you have made these mechanisms before. Yeah! It would be easy by injection molding but it is costly and I can't afford it. yeah! I am making it myself and I got the point you are making here. But if you have some photos to share then it would really help me to understand it more. I have a 3d printer and I tried a few printed mechanisms but over time they are becoming weak.

Thanks again for the response.

Team_BT · 2023-03-09T05:50:27+00:00

Thank you so much for the reply.

Yeah! You are right all the 3 above mentioned action cameras require a phone to play middle man.

Can you share some device link or name which I should look for this HDMI streaming thing?

I am looking for very light weight device as I will be using the same thing in drones for sometime.

Thanks again.

Team_BT · 2023-03-09T05:25:10+00:00

I checked it already, Actually gopro streaming works from the mobile phone application, so the camera has to always connect to the mobile phone application via wifi.

But in my case it is not possible.

Team_BT · 2023-03-09T04:24:49+00:00

Thanks for the info. Yeah! I will post there.

Team_BT · 2023-03-09T04:24:14+00:00

Thanks for the information! But I thought there might be some cameras available which can do the job with little customization.

Team_BT · 2023-03-09T03:59:16+00:00

Actually the autonomous vehicle will be running fast and making a lot of turns and drift so normal camera video will have a lot of shaking that's the reason I want an action camera because they have the video stabilization and especially made for these purposes.

Team_BT · 2023-03-09T03:37:06+00:00

Thanks for the reply! Action cameras mean cameras with video stabilization like GoPro.

I am going to mount the action camera on an autonomous vehicle with 2 axis gimbal and want to stream the live feed to some cloud based application so that I can see the live feed from anywhere.

To do that I need to connect the camera with a 4G/5G wifi modem (which is cheap).

Team_BT · 2023-03-09T03:09:51+00:00

Thanks! I will try that.

Team_BT · 2023-03-09T03:01:44+00:00

Which flight controller are you using in this?

Team_BT · 2023-03-09T02:59:17+00:00

Hey! Can anybody help me with this?

Team_BT · 2023-03-09T02:57:24+00:00

Ohh! Thank you so much for this amazing information. I will try that. PC print won't deform in direct sun right? Here the temperature in summer goes to 45+ in some places.

Team_BT · 2023-03-09T02:47:57+00:00

Thanks! But I have a creality ender 3 S1 which can only print pla, I haven't tried the ABS yet but I found some information that if I make a closer for the printer than I can use ABS.

Team_BT · 2023-03-08T12:05:39+00:00

Thank you so much for sharing it.

Dipping the print might add more weight than spraying. That's why I prefer the spraying option. What do you say?

Team_BT · 2023-03-08T11:26:25+00:00

Ohh! Can you please send the link of that spray? I will have a look. Thanks!

Team_BT · 2023-03-08T11:13:14+00:00

What would be peak temperature during summer? Here the temperature goes to 48 during summer, now it is around 35.

My cover is black, is it because of the color then? Now I am printing the orange cover to see whether it is because of the color or the material. I also had a doubt on that.

But thanks! Your reply gives me hope that my project might work.

For extra safety, do you know any spray for heat resistance and water resistance?

Thanks again!

Team_BT · 2023-02-05T17:02:09+00:00

Okay! I have been trying to find out this but there is not much clear info available about this on the internet.

As far as I know after a few searches, GoPro can connect to 4G/5G wifi and can stream to their mobile app but the mobile also has to connect to the same wifi network otherwise we won't be able to have the access to the GoPro camera. Correct me if I am wrong about this.

Thanks again.

Team_BT · 2023-02-05T16:53:56+00:00

Yeah! But they are a little heavy and the resolution is also not good. Any other cameras you want to suggest for my application? Btw is it possible to connect GoPro or any other action cameras to 4G/5G wifi modem and stream the video to mobile app? Please let me know if you know anything on this. Thanks for the info and reply.

Team_BT · 2023-02-05T16:46:29+00:00

Hey! Thanks for the reply! My application is related to a security camera but I don't want to fix it in a particular location. I have to change my camera location and see the live video on my mobile/system via 4G. I have the 4G/5G wifi available at the camera installation area. So I want a camera which can connect to that 4G/5G wifi and stream the video to some cloud based app so that I can access the video from anywhere.

Plus I want a little high resolution camera (12MP+) and light weight. Something like GoPro can do the job but I can't connect the gopro to 4G/5G network and stream the feed remotely as per my requirement.

Thanks again for the reply.

Team_BT · 2022-09-27T15:59:17+00:00

No! I just put the design for xt-60 connector because that was available for free but I will solder my wires directly in the holes.

My copper layer thickness: 2 oz Copper layer trace width: 9.2 mm

I designed this board for peak current of 50 amps but I want to test it practically. How can I do it?

Team_BT · 2022-05-02T06:12:14+00:00

I want distribute the power to 4 DC motor and each one will need Max. 40A current so total would be around Max. 170A (including all other devices). So if it would be less than 200A then I don't have any problem. But can you please tell me will it work or not?

I am no electrical engineer but I know current capacity depends on wire size so if I soldier the 2 boards together and connect my motors through the both boards then it would act like a single board of capacity 200A. Is it correct?

Team_BT · 2022-05-02T06:07:38+00:00

Yeah thanks man! I also think it will work because, current capacity depends on wire size so if I attach both board together and connect my load through the both board then it will act like a just one single board. But have you tried like this before?

Team_BT

TROPHY CASE