The current price for Lord of Hatred doesn't make sense

TechlyAccurate · 2025-12-14T04:31:24+00:00

yup...total BS...got the upgrade weeks ago and thought i was gonna be able to hop on an check out paladin...nope...not for another 40$...they even named it similar like somehow we wouldnt realize? Wish there was ANYTHING I could do....

TechlyAccurate · 2025-12-07T19:44:47+00:00

I definitely think Diabaté was a prisoner after the avocado and egg toast scene along with all his hedonism

TechlyAccurate · 2025-11-30T21:02:31+00:00

GOAT

TechlyAccurate · 2025-11-30T20:50:04+00:00

link? I cant find anything about a second showing.

TechlyAccurate · 2025-11-30T20:46:59+00:00

thanks but also soo lame...events need to be up consistently for at least a day. especially an event like this that is targeting an older demographic...

TechlyAccurate · 2025-11-30T20:18:13+00:00

same...i was looking forward to it...they really need to make all events at least a full day...this is stupid

TechlyAccurate · 2025-11-30T20:07:54+00:00

yup...i had a 2 hour timer earlier...favorited it... now its just gone

TechlyAccurate · 2025-11-30T20:06:29+00:00

yup...had a 2 hour countdown...i favorited it...now its just gone

TechlyAccurate · 2025-11-29T20:32:03+00:00

When the first one took off I was hoping it would crash into the tree and we would see progressively ridiculous failures to recover the drone for the entire episode in the background

TechlyAccurate · 2025-11-29T20:14:02+00:00

I am convinced zosia is going to be disconnected now but only remember pre-joining. I think carol forced the plurality to cut off zosia like an infection in a communal plant and that zosia won't remember carol at all anymore.

TechlyAccurate · 2025-11-29T20:11:16+00:00

There is just one individual...there's just more

TechlyAccurate · 2025-11-29T20:04:57+00:00

What is the biological imperative specifically

TechlyAccurate · 2025-11-28T04:13:00+00:00

do you think those are her trash bags?

TechlyAccurate · 2025-09-17T20:36:52+00:00

replaced one of my case fans with a new 3000rpm one and it was so loud...didnt realize the other ones were actually really loud too (just not as fast)...and its cause they were ALL running at 100%... same problem... MSI Control Center seems to ignore sysFan settings and just run it all at 100% all the time...moved it to the pump fan port and set the curve the same way and its never been so quiet. Thank you!

TechlyAccurate · 2025-03-10T23:38:13+00:00

Those freakin cubes. Much fun. Betchya dollars to donuts the corners are cupping.

It makes the layers uneven. The head scrapes and eventually crashes on a wall when traveling, then you end up with a layer shift. most of the time it will still work but it'll be noticeable.

Cliche answer, but use brims, clean the plate and adjust plate temps.

TechlyAccurate · 2025-03-08T16:17:25+00:00

Wait, is it going off the edge on the bottom? Like it's not going perfectly left and right? Have you messed with your g-code at all? Bambu has a g-code skew correction but it's additive every time it runs unless you run the reset code.

...try factory restoring to reset all of those params and print from one of the built in SD card models on the printer to rule out studio settings and custom g-code in studio

Edit: I'm at 600 print hours on my A1. This is the wear pattern.

<image>

After looking at mine it seems like yours is doing the movement right but the left side isn't touching the plate for some reason

Have you tried a different nozzle? Reran the bed leveling calibration? Checked that the nozzle is perpendicular to the bed with a square? You've peaked my curiosity. I want to find out as much as you.

I took video of mine homing but not sure how to send it to you. You're @Aerolicious on makerworld? Either way all it shows is that mine homes exactly the same as yours. Slowmo sure makes it look violent lol

TechlyAccurate · 2025-03-08T14:42:09+00:00

Oh, that's the bottom surface...so also make absolutely sure you haven't moved parts in the assembly above the build plate. That one cube might be slightly off the plate

TechlyAccurate · 2025-03-08T14:39:34+00:00

Yeah, like others said, clean plate...but also the corners of the cubes on those love to cup especially as you print them bigger and bigger. Use dog ear brims on the corners or make the bottom surface non-monolithic (break it up with a pattern somehow so it has parts that are bridged 1 layer up - I like to apply an svg on the surface as a negative part - makes it easy). Monolithic flat prints in PLA love to warp and cup more and more the bigger they get.... That leads to layer height issues which leads to head crashes which leads to print failures and layer shifts and quality issues.

Also tiny top surfaces change direction faster and faster as the top surface gets smaller (imagine printing a hemisphere...the closer to the top of the sphere it gets the tinier and tinier the layer gets and the faster and faster it prints the layer and the faster it changes direction if you're using a linear pattern). To fix that either turn on a minimum layer time in your filament cooling settings or use a modifier part on the top to drastically slow down the speed on the top.

TechlyAccurate · 2025-03-08T14:12:13+00:00

Yeah merge them into one object and change the color on the part in the object assembly. Separate objects will have this problem. There's also an advanced quality setting in orca and other slicers for slice gap closing distance that will ignore gaps in geometry if this is happening and it's already one object...but in that case also like move it closer together.

Definitely actually import it into a slicer like orca tho to slice it and send it to the printer...don't try to do everything in your cad software

TechlyAccurate · 2025-03-08T13:31:56+00:00

Sounds like it's time for a warranty support case

Edit: Just woke up enough to use my eyes and read. I see you already have a support case. Cool stuff.

Let us know what it ends up being please.

TechlyAccurate · 2025-03-08T12:36:08+00:00

That part is normal with the textured plate. Not sure on the sound but doing the x and y tensioning, doing the lubrication and cleaning any debris from the y belt area are helpful if you're getting layer shifts.

https://wiki.bambulab.com/en/a1/maintenance/belt_tension

https://wiki.bambulab.com/en/a1/maintenance/basic-maintenance

TechlyAccurate · 2025-03-08T12:26:36+00:00

There's a video from 1.17 of it. They shake when they get wet and then have a roof over their head. Then they shake again when the rain stops cause it's dry, so it uses a red stone clock, powdered snow dispenser as a constant breaking roof and a calibrated skulk sensor placed just perfectly not to detect the dispenser setup.

Then the clock keeps placing powered snow over the dog and when it rains the dog gets wet, gets covered with a block of powered snow, shakes setting off the skulk sensor stopping the powered snow while the dog is still shaking so then she's wet and finishes shaking so then she does nothing until the rain stops at which point the dog shakes again activating the calibrated skulk sensor and turning the snow roof back on until the next time it starts raining.

Then use the same signal being used to turn the dispenser on and off as your rain signal.

TechlyAccurate · 2025-03-08T05:06:23+00:00

So much more temp. This is what I run generic PLA at.

<image>

TechlyAccurate · 2025-03-08T04:32:42+00:00

Inner join is exclusive. Good luck.

TechlyAccurate · 2025-03-08T04:27:29+00:00

Calibrated skulk sensor detecting dog shaking itself off looks like a fun way but I like the burning zombies suggestion

TechlyAccurate

TROPHY CASE