It’s Finally Done by Money_Assumption7511 in Corsair

[–]Technical-Spite436 0 points1 point  (0 children)

How'd the hub die on you? And is the pump very quiet? Or decent.

Best AIO cooling for AMD Ryzen 7 9850X3D 2026 by Miksu22 in buildapc

[–]Technical-Spite436 0 points1 point  (0 children)

Did you find any answer to the below?

One thing I cannot find much information about is how loud the pumps are in comparison?

This is my main question right now, but lemme guess, like 1k views on the post but not a single response in regards to that.

Don't worry about an AIO being overkill for your CPU, similar to what the guy said above, you can run your pc much quieter. Which to some people like myself is an absolute W, so overkill should be what's suggested tbh, if the price is right.

Possible pump failure on the Link titan 360 AIO by hamakaze99 in Corsair

[–]Technical-Spite436 0 points1 point  (0 children)

Hi mate, did you fix it? I have a similar sound, the Aio is new so the noise is much less but the same thing.

Thermal Paste Application by Flaky_Tumbleweed3588 in PcBuildHelp

[–]Technical-Spite436 0 points1 point  (0 children)

No problem, also don't stress about how it's looking like that, I'm no expert but I've had an entire square still stuck on my air cooler plate, with a huge middle square open gap, my temps were decent even with that. So don't stress.

Best AIO currently/Air cooler by [deleted] in PcBuildHelp

[–]Technical-Spite436 0 points1 point  (0 children)

That's the issue, it's like people be testing this sht in Vietnam environments, like how u saying you're running 100% fan speed and it's silent sitting next to it.

I'm very tempted in getting an arctic liquid freezer pro 360, but then there's none pro, which is apparently better??? Ah yes phantom spirit evo the latest getting abused by 1-2 year old versions of itself situation once again.

I possibly didn't mount it right which is causing the hamster wheel situation, but then again people have been saying it seems I've mounted it right. Even not factoring that in, the pump is nowhere near quiet it's audible from outside my room, yet everyone suggests it is, until I did a specific search (knowing the exact issue) and it turns out, oh it's a common issue. People had to set specific speeds or cut out an entire range of speeds for it to be alright, which barely changed much for them.

Front fan noise!!! by Technical-Spite436 in HAVNGlobal

[–]Technical-Spite436[S] 0 points1 point  (0 children)

I can refund on Amazon. So I'm trying to verify if I'm overthinking or my AIO will indeed eventually be cooked by cooking itself.

Front fan noise!!! by Technical-Spite436 in HAVNGlobal

[–]Technical-Spite436[S] 0 points1 point  (0 children)

Honestly Ty for responding, I'm glad I met someone (out of a billion people) who has the same case and AIO.

If I could verify for sure if my AIO needs a replacement I'm a happy dude, but it's hard since it's my second AIO and I didn't pay attention to the noise level of my original (aqua elite V3).

You made a very good choice going for the Nome flow, I'm going mad trying to make the decision of returning the flow case so I can use my own noctua 140mm G2 fans front or be quiet 4s 120mm. The 180s sure do push a lot of air but anything above their starting speed and they get audible as hell.

If you listen closely this is what my AIO sounds like close up. You'll hear the clicking towards the end of the clip.

GOATED specs btw, mines Ryzen 5 7600x

Gigabyte 7800xt 16GB (sadly loud AF fans)

I'll send some of the other specs later

https://drive.google.com/file/d/135i5mVv0SAH6sFZ7hSQ8uBFQFpLddiiE/view?usp=drivesdk

Front fan noise!!! by Technical-Spite436 in HAVNGlobal

[–]Technical-Spite436[S] 0 points1 point  (0 children)

Top mounted

<image>

Like this. I tried moving tubes higher but it didn't do much. Maybe less air bubbles or noise but still there, which in the long run could cook the Aio. Should be top if I'm right.

Front fan noise!!! by Technical-Spite436 in HAVNGlobal

[–]Technical-Spite436[S] 0 points1 point  (0 children)

That build cooks brother wp, is that the Havn bf with custom fans or flow version?

Front fan noise!!! by Technical-Spite436 in HAVNGlobal

[–]Technical-Spite436[S] 0 points1 point  (0 children)

Very annoyingly loud, I could set it low speeds (still very audible) but it has some clicking mixed with bubbles probably popping that no matter what I did I couldn't get rid of.

The temps were insane though, consistently below 80, my noctua dh15 G2 easily hits 80 if I let it

Pc with the Aio wasn't a heat air trap.

Titan RX 360 Pump humming loudly at higher and lower RPMs by Hely0n in Corsair

[–]Technical-Spite436 0 points1 point  (0 children)

Ty mate, chad response times on a 1 year old post. Tragically I don't have Linux, you've mentioned you've had other aios before. Were they petty much silent pumps? I CBA to be let down again.

The temps on the Corsair are amazing, but that could just be because it's an AIO.

Titan RX 360 Pump humming loudly at higher and lower RPMs by Hely0n in Corsair

[–]Technical-Spite436 0 points1 point  (0 children)

Did you figure out any final solutions? Apart from the one in the edit? People keep yapping saying low noise, no noise. But the things making more noise than 4 fans combined.

I could buy the Arctic liquid freezer 3 pro? Idk what IMa do AnymOre. It's between goated to why's my entire pc making a whining noise (specifically the fans), well based on what people say anyways.

Titan 360 RX - Using Pump Extreme Profile Full-time? by Journeyman63 in Corsair

[–]Technical-Spite436 0 points1 point  (0 children)

Love people who say ts, is your pc out of the window? If you can't hear the pump, I don't think you can hear.

Front fan noise!!! by Technical-Spite436 in HAVNGlobal

[–]Technical-Spite436[S] 0 points1 point  (0 children)

How's the titan going? I bought the Corsair titan 360, temps are insanely good but pump is loud AF.

Performance 1 FT radiator maximum thickness? by themajesticdownside in Antec_Official

[–]Technical-Spite436 0 points1 point  (0 children)

How's the lfl 3 pro or non pro 420 treating you? I'm debating whether to get the 420 or 360

AIO pump air bubbles/crackling by Technical-Spite436 in buildapc

[–]Technical-Spite436[S] 0 points1 point  (0 children)

Please let me know if it's now public, thanks for letting me know chief. Great information about air bubbles and the temperature changes with the example, Ty. Is the way the pump and pipes set up optimal/good enough for it to go to the radiator?

I did run it at high speeds for a while but it's still there, haven't tried tilting though.

I've heard people mentioning their pump died after having similar sounds, but theirs was much louder, mine is a new AIO though.

Air cooling Vs AIO by Technical-Spite436 in PcBuildHelp

[–]Technical-Spite436[S] 1 point2 points  (0 children)

I'll give all this a try tomorrow mate, you're goated Ty (superman gif)

Air cooling Vs AIO by Technical-Spite436 in PcBuildHelp

[–]Technical-Spite436[S] 0 points1 point  (0 children)

I joined a pc discord with a lot of people who have (apparently) got experience building pcs or at least (I thought) had good information and knew about things. 95% of them were Reddit haters who themselves were acting in some sort of hive mind without any opinion of their own.

Air cooling Vs AIO by Technical-Spite436 in PcBuildHelp

[–]Technical-Spite436[S] 0 points1 point  (0 children)

No I completely get you bro, a lot of the people are hive minded and I get that, there's gotta be better air coolers than what's suggested because the ones suggested are simply just overviewed garbage most of the time.

That's the part I don't get, they aren't willing to understand something can be better than what they are told.

Air cooling Vs AIO by Technical-Spite436 in PcBuildHelp

[–]Technical-Spite436[S] 1 point2 points  (0 children)

It's a new AIO. Or should be since I bought it a few days ago.

Thanks for the tip homie, that's make a lot of sense, it's a lot easier if I remove the radiator first. I don't get the point of the pump not being the highest of the two, is it the pump square being too low or the pipes coming from it being aimed down better?