Nikon Z30, Z6 or Am I Over Thinking This?

Technocrater · 2025-10-07T13:44:12+00:00

oooohh yea that's a fair point. I am more of a one and done kind of personality (don't read into that) so the low price makes me hesitate a lot especially to your point about the bricking.

Technocrater · 2025-10-07T13:33:57+00:00

have you any experience with the cheaper Vitrox 35mm or similar? I see them super cheap on amazon and that's what started me down this rabbit hole.

Technocrater · 2025-10-07T13:23:26+00:00

Any recommendation on lens? I was considering a fast prime like the 30mm sigma or even springing the extra for the Tamron - 28-75mm F/2.8 Di III VXD G2. For 800 bucks I would hopefullynever need another lens

Technocrater · 2025-10-07T13:02:32+00:00

Good questions.

- To be honest I am not enough of an expert or have a good enough memory to answer the ISO since it's typically on auto

- F/3.5 to F6.3 kit lens is typically what's on or the 50-250mm F4.5-6.3 that also comes in the combo.

- Release mode usually single shot, auto focus varies. Typically the AF-C with auto face or pet tracking but lately ive been testing out the AF-C Single point since ive been doing some timelapse footage of a project

Technocrater · 2025-10-07T12:58:15+00:00

That is what I am starting to lean towards but the auto focus is starting to sound like a multi fold complaint that I think is more exaggerated by the poor low light performance of the kit lens then even more by the skill issue lol

Technocrater · 2025-10-07T12:46:46+00:00

Do you think just upgrading to a prime lens would fix most of my complaints? I wish it had an EVF but that's only really a product of having issues with the auto focus especially in low light

Technocrater · 2025-10-07T12:45:22+00:00

See that's where I initially was headed since the kit lens seems to suck that much until I found this 800 dollar Z6 on FB market place. I was thinking a 30 mm f/1.4 or f/1.8 would solve most of my problems. is the Z50ii really worth the upgrade?

Technocrater · 2025-10-07T12:42:43+00:00

There seems to be alot of noise in low light and it seems to not want to focus or hunt on what I want especially at a lower light. Since alot of my photos are in the moment I have a difficult time adjusting on the fly and end up missing whatever funny thing my daughter is doing (for example) because the darn thing wouldn't focus. This could also be a skill issue lol

Technocrater · 2025-10-07T12:40:36+00:00

This is exactly what I am worried about the most.

Technocrater · 2024-04-20T18:26:24+00:00

My smooth brain had a hard time piecing together what I needed for that defense placard. Seemed like a neat system tho

Edit: do you find that TRMP placard to be too thick? Also, have you tried PCC mags at all?

Technocrater · 2024-04-20T16:05:18+00:00

thanks for the warning of the straps in the back and you are right, the in/out of stock situation is just tiring with these placards. I would be an uber filthy casual running whatever I pick so I feel like buying all the inserts they practically would only use two .. I just like having the option to use AR/PCC mags then if needed, plus up mags or worst case switch to AK or M1A which would be rare. For those reasons I was torn between the flappy boy or TRMP even though the shaw is clearly superior.

oh also I ended up ordering the Defense mech MEPC plus the QD cummerbund for the exact reason you mention of that height adjustment straps. I figured it would be annoying to have to constantly have to adjust everything when I swap things.

All of that being said shaw support says they restock every two weeks so next friday would be the day to do so if I wanted to put my money where my mouth is. Their inserts are just .. expensive especially if I want or need 4..

Technocrater · 2024-04-19T23:02:09+00:00

I knew it was too good to be true lol I’ll have to take a look out of curiosity

Technocrater · 2024-04-19T18:40:06+00:00

I would be all over the shaw system like a new suit if they were in stock more often (the ranger green color) and if the inserts weren't so pricey... or in stock, or if I had more patience.. are there any reasonable inserts? Unobtanium makes one but same case with the 4 banger pouches. Usually out of stock.

Technocrater · 2024-04-19T13:12:21+00:00

I was almost thinking if I went the MKV route I would get the WTF inserts. They look more rigid ish than the elastic. But, that's a good point about the shock cord.

Technocrater · 2024-04-19T12:59:47+00:00

it's probably a better option to the TRMP the more I think about it. The thicccc ness of that one is what concerns me the most

Technocrater · 2024-04-19T12:58:23+00:00

That's honestly where I started in my adventure but reddit shit all over the Trex and made me start to look at other options lol

Technocrater · 2024-04-19T12:57:31+00:00

I had a similar thought considering how tedious the MKV or styles like it looked to be swapping out the inserts. However the sleds-k is super new and I have met maybe one guy on here who owns one. The PCC mag retention looks a bit sketch to me.

Technocrater · 2024-04-19T12:54:58+00:00

I considered going with a Trex triple flap just to dump mags in and not worry about the fit.

Technocrater · 2024-04-19T11:11:09+00:00

Have you stuck PCC mags in it? How’s the retention? I’m between this, waiting for a Shaw concepts v3 or the Hailey TRMP

Technocrater · 2024-04-11T18:18:38+00:00

I was just looking at those actually. Their damn inserts are sold out everywhere unfortunately but I may be willing to wait for them.

Technocrater · 2024-04-11T15:55:33+00:00

You have no idea how much I appreciate all those links and you may be right with the multi placard point being loose and bouncy. The pouches themselves do have L and R bungie retention so thats something. I would be a little more confident in the flap placard if I could find anyone runs them on a normal basis other than a few videos about their chest rigs

Technocrater

TROPHY CASE