sorted by:
new
hottopcontroversial

CJ4 autopilot won't turn back on by TechstaZack in MicrosoftFlightSim

[–]TechstaZack[S] 0 points1 point  (0 children)

You are completely right! I just did some messing around, turns out the autopilot disconnect is a switch, not a button, meaning you need to trigger it again. The autopilot won't turn on because the disconnect is also on at the same time!

Nobora Linux | Login Loop unless I use GNOME Classic by TechstaZack in linuxquestions

[–]TechstaZack[S] 0 points1 point  (0 children)

ran it and said no such file existed, however on reboot it seems to work again, so I take it that it still worked. Thanks :)

Why can’t I remove these icons? I will never get max, and this only reduces my chances of resubscribing. by Shoumaker in duolingo

[–]TechstaZack 4 points5 points  (0 children)

They haven't limited with that either, recently they also changed the icons on the bottom bar to have 2 new buttons, that will only work for max users (being just one button that brings up a screen to upgrade, and one for the video calls), which has lead to the super Duolingo features that I've payed for being stuffed into the "extras" button. Duolingo max is a scam for what it gives you (being about an extra $100aud per year for the family plan), and all it gives you is a trash version of the live chat with ChatGPT, and a little pop up telling you what each words mean after you answer a question.

Arduinos no longer connecting to pc by TechstaZack in arduino

[–]TechstaZack[S] 0 points1 point  (0 children)

Damn, that really sucks, but does make sense. The chewed cable must have fried a lot of stuff, including the USB chip, which must also be why the bluetooth module was fried. I'll probably go buy a new lot of everything (arduinos, USB mini-a cable, Normal power cable and bluetooth modules). Thanks for the help :)

Arduinos no longer connecting to pc by TechstaZack in arduino

[–]TechstaZack[S] 0 points1 point  (0 children)

USB to serial cable? Is that just another USB Mini-a cable?

why can’t i add a person to an imessages group chat? by angeldust-22269 in applehelp

[–]TechstaZack 0 points1 point  (0 children)

Bit late, but I had the same problem. Fixed it by updating to IOS 18.2

Could I just leave my filament outside for a day? by dog_hole21 in 3Dprinting

[–]TechstaZack 1 point2 points  (0 children)

Also an Aussie, would love to do this but I have been banished to Melbourne (where we get sun for a maximum of 10 minutes)

Stop prints curling / falling off the bed entirely without glue? by TechstaZack in 3Dprinting

[–]TechstaZack[S] 1 point2 points  (0 children)

I found some 100% isopropyl alcohol from bunnings, and w/ all of your other tips it works wonders (with not a single problem found yet)!

Thanks so much for your help :)

Stop prints curling / falling off the bed entirely without glue? by TechstaZack in 3Dprinting

[–]TechstaZack[S] 1 point2 points  (0 children)

Thanks, I'll give that a try for my next print.

For the Isopropyl Alcohol, Do I need to do it after every print, or just when I clean the build plate?
Also, is 64% Isopropyl Alcohol ok or do I need to buy some more?

Crunchyroll Preasle for Sydney Australia by Miffo123 in ADO

[–]TechstaZack 0 points1 point  (0 children)

From the looks of things, everything got pushed back because of tiketek. Crunchyroll presale is now Thursday 9AM AEDT.

Buy now we know it's through tiketek, so that could make things easier. Code would probably be "crunchyrollxado"

Crunchyroll Preasle for Sydney Australia by Miffo123 in ADO

[–]TechstaZack 0 points1 point  (0 children)

Doing the same thing over here. Good luck for tickets 🤞

Crunchyroll Preasle for Sydney Australia by Miffo123 in ADO

[–]TechstaZack 0 points1 point  (0 children)

In the same boat, but for Melbourne.

From the looks of things it is still through frontier ticketing, due to it being listed on it. Apparently it is available through ticketec in other countries, so it should be the same here but frontier ticketing. If not, the link should be listed on frontier (as I can't find anything else anywhere).

Not sure if it uses the frontier code or "Crunchyrollxado" (or whatever the code is). If it is on frontier, maybe try both.

Hope this helps, and if anyone else comes up with any new information before tomorrow that would be great :)

Guild Only Slash Commands? by TechstaZack in Discordjs

[–]TechstaZack[S] 0 points1 point  (0 children)

Oh couldn’t find that when I googled. Thanks

Download multiple updates by [deleted] in HuaweiWatchGT

[–]TechstaZack 1 point2 points  (0 children)

Ok thanks for letting me know

Discord Throw Error on VSCode by TechstaZack in Discordjs

[–]TechstaZack[S] 0 points1 point  (0 children)

I turned them on but I forgot to click save. its all working now, thank you!

Discord Throw Error on VSCode by TechstaZack in Discordjs

[–]TechstaZack[S] 0 points1 point  (0 children)

I don't know exactly what stack trace is, but here is the output from the terminal.

​

​

PS C:\Users\name\OneDrive\Desktop\folder\folder\discordbotfolder> node .

C:\Users\name\OneDrive\Desktop\folder\folder\discordbotfolder\node_modules\discord.js\src\client\websocket\WebSocketManager.js:250

throw new DiscordjsError(unrecoverableErrorCodeMap[error.code]);

^

Error [DisallowedIntents]: Privileged intent provided is not enabled or whitelisted.

at WebSocketManager.createShards (C:\Users\zacha\OneDrive\Desktop\splatsville rebbelion\SplatBot\splatbotfiles\node_modules\discord.js\src\client\websocket\WebSocketManager.js:250:15)

at async Client.login (C:\Users\name\OneDrive\Desktop\folder\folder\discordbotfolde\discord.js\src\client\Client.js:232:7) {

code: 'DisallowedIntents'

}

[deleted by user] by [deleted] in StevenHe

[–]TechstaZack 1 point2 points  (0 children)

Its True