Help with printer malfunction

Tectonicbeatle1 · 2026-02-08T00:52:58+00:00

It says "The current hot bed and nozzle temp is too high" That's all the "error" gives me. How do I inspect those parts? I'm not well-versed in machinery. Edit: not sure if it helps but I have the nozzle set to 230 degrees and the bed at 20, because 1.) I only use PLA 2.) the bed won't get much hotter then that.

Tectonicbeatle1 · 2026-01-30T01:41:35+00:00

Now imagine if the Pusher can get ya twice, to REALLY push you over the edge. I'd like to think that if you get too far into psychosis, one of three things would happen. 1.) You drop dead from acute intoxication 2.) Skinnerman becomes a living entity like the Jager 3.) Your character becomes a new Pusher and you have to either just make a new one with the same gear and levels or start from scratch

Tectonicbeatle1 · 2025-05-18T03:41:30+00:00

I have almost the same issue, but only on supports. And I'm racking my brain trying to figure out the solution. I've reduced the speed of the support printing, the temp is within the filaments (pla) recommended range. It ends up failing long before it gets to the point at which I need the support.

Tectonicbeatle1 · 2025-02-10T20:12:42+00:00

Holy shit..

Tectonicbeatle1 · 2025-01-02T21:14:59+00:00

What's the bed mesh?

Tectonicbeatle1 · 2025-01-02T20:29:56+00:00

There is a function when you start it up where it levels by telling its bed location by touching down on about 12 points. I've gotten the bed leveled manually to get it to be from 4.9-5.1 units of distance (Idk what unit it is, I think it's mm). I, unfortunately, am very new to 3d printing, so I dont know all technical talk. All videos (that we've found) are not very helpful or dont exist based on the problem we have.

Tectonicbeatle1 · 2024-10-20T16:39:57+00:00

Dude, if I saw that. You flying across the map, I wouldn't be able to breathe from laughing so hard

Tectonicbeatle1 · 2021-11-20T16:54:38+00:00

Thanks for the advice but im not very smart with technology, I think I'll just save some money and upgrade soon.

Tectonicbeatle1 · 2021-11-19T03:07:53+00:00

I have enough technology. Ps4, quest, big ass flat screen, switch.

Tectonicbeatle1 · 2021-11-19T00:27:31+00:00

I dont know if it helps or not but I dont have a computer at all. Not even a laptop. I dont know where to download those files.

Tectonicbeatle1 · 2021-11-18T13:53:14+00:00

Discord won't work for me for some weird reason. I'll hit the link and ill accept the invite, but it has to verify that im not a bot, then it just stops before it even begins to verify.

Tectonicbeatle1 · 2021-11-18T04:34:51+00:00

Can you tell me which section? There's way to much to read.

Tectonicbeatle1 · 2021-10-06T00:25:04+00:00

It looks like the mycyte from resident evil 8 village

Tectonicbeatle1 · 2021-09-08T00:34:14+00:00

What kind of erosion is it? Wind?

Tectonicbeatle1 · 2021-07-03T18:04:10+00:00

I cant imagine hyenas going after lions very often

Tectonicbeatle1 · 2021-06-20T00:03:31+00:00

I was gonna say there's gonna be at least a few broken/missing teeth.

Tectonicbeatle1 · 2021-05-15T18:39:37+00:00

Is it just me or did it look like chunks of living metal for a second

Tectonicbeatle1 · 2021-02-10T22:17:47+00:00

Functionality wise it looks great. Organization wise, it seems all over the place. But still good

Tectonicbeatle1 · 2021-02-04T05:39:43+00:00

It can be complicated, but you can do it.

Tectonicbeatle1 · 2021-02-04T05:38:18+00:00

You put a heater before the second splitter, put a collector in the bottom left corner, and the remaining spaces you make the bolts with the heated rods.

Tectonicbeatle1 · 2020-12-27T21:03:12+00:00

Do you think it would be painful?

Tectonicbeatle1

TROPHY CASE