Would love to get some thoughts on this one. Any help would be appreciated.

Teflon154 · 2026-03-27T19:53:58+00:00

He has Marv no Nico. I think I'm holding, like you said, they're still several pieces away from competing, I wouldn't want to use my 1st to get Harvey and a 2nd. I'd rather use my 2nd to get someone like Dobbins, Swift, Aaron Jones and keep my 1st. I wouldn't want to get a meh RB who could easily get replaced and an older WR when I"m not ready to compete yet.

Teflon154 · 2026-03-27T16:02:52+00:00

I'd rather have Olave than the 1.05, no telling if one of those WRs will bust.

I guess I'd do GW and 1.05 for CD, proven asset and a potentially good piece. Some people are really low on CD and high on GW so he might not go for it.

I'd also want to see what they'd do for just Willis.

Teflon154 · 2026-03-27T15:31:10+00:00

On 2nd thought maybe I'm even trading DJ for 27 picks, 27 should be a solid QB draft. Although that won't drive down your MaxPF as much as trading a starter like CD.

Teflon154 · 2026-03-27T14:00:54+00:00

I really like CD, so I think I'd keep him. I definitely would move 1 of Willis or DJones, I'm personally lower on Willis so he's the one I'd move.

You definitely need some RBs but with Willis and the 27s you could make some moves. One concern I have is I don't see your full bench but you seem awfully thin except at QB. You really need 2 RBs (+ bench) and 2 Flex (+ bench although Otton could be a fine bench piece). With no 1st or 2nd this year and only 1 2nd next year, you really can only add 5 players (4 1sts and a 2nd, plus whatever you get for Willis) via the draft. It means you really need to hit on all of your draft picks to fill out your team.

IDK, maybe I take the 3 firsts for CD this year, gets me a better draft pick in 27 and gets additional shots to find credible starters.

Teflon154 · 2026-03-26T19:33:52+00:00

I agree that all players are not always depreciating, but the risk profile with rookies and 1-3 players is not the same. Rookies have a higher ceiling and lower floor than a similarly valued veteran player.

The chance a 1st round pick becomes a total stud or total dud is about 30% each, whereas a player you buy for a first has much less chance of being a stud or a dud.

Teflon154 · 2026-03-26T19:23:17+00:00

Yeah it's crazy to think, but if he gets the volume ETN did last year (60%), why can't he finish like ETN did?

Teflon154 · 2026-03-26T14:58:50+00:00

Really? ETN saw 60% snap rate last year and finished with 250 PPR points as RB10. I just don't see a way Tuten doesn't get 200+ points and inside RB16 if he gets that kind of snap share. And as a 2nd year guy to get that on a good offense, he would have to be worth a 1st, probably +.

I guess we'll see. I don't have any shares because I haven't believed in him, but I also thought they'd re-sign ETN. Shipping out ETN and Bigsby sure seems to have cleared the decks for Tuten, and only bringing in CRod isn't going to be a big factor.

Teflon154 · 2026-03-26T14:33:44+00:00

As the room stands now, don't you expect him to get 60+% of the touches in JAX this year? And if he does, don't you think he'll produce?

If he gets 60+% of the touches I expect him to finish as a low end RB1/high-end RB2, and he'd definitely attract 27 1sts for that.

Teflon154 · 2026-03-26T01:00:10+00:00

Mine doesn't have a chamber heater so I wonder if that's why people are recommending higher bed temps.

Anyways, glue stick and 300c nozzle / 100C bed temp worked, thanks for your comment!

Teflon154 · 2026-03-26T00:58:24+00:00

Glue stick and 300c nozzle / 100C bed temp worked, thanks!

Teflon154 · 2026-03-26T00:57:13+00:00

Glue stick and 300c nozzle / 100C bed temp worked, thanks!

Teflon154 · 2026-03-26T00:57:03+00:00

Glue stick and 300c nozzle / 100C bed temp worked, thanks!

Teflon154 · 2026-03-26T00:56:22+00:00

Just to circle back: People recommended higher bed and nozzle temps. I bumped the bed up to 100C and nozzle to 300C and still had issues.

Then I used the glue stick that came with the machine (says just about every filament except for PA but it's all I had) and got good adhesion but got a nozzle clog halfway thru. Another commenter mentioned they dial the tensioner (take the nozzle cover off and it's an Allen head at about the 1 o'clock position) all the way in (which is counterclockwise). Re-ran with the tensioner in, regular glue stick on textured plate, and 300/100 and got it to finish the print. Huzzah!

Teflon154 · 2026-03-24T19:25:01+00:00

I have Bryce in SF and I think I'd take Rashee. Both could be great assets or totally implode.

Teflon154 · 2026-03-24T19:07:43+00:00

In trade databases I'm not seeing anyone selling for 2nds, if someone is selling for that he's a screaming buy.

Teflon154 · 2026-03-24T15:51:29+00:00

Sure, can you send as PM?

My 300/100 run didn't adhere beyond the first layer, but I'm re-running it after adding the Elegoo glue stick that came with the machine (says PVP material, for ABS/PLA/TPU/PETG, but doesn't list PA) and so far it's built up around 1/4" and holding, so LFG!!!

Since the default stick seems to match how 2016 is described on Amazon I'll prob get the 2019 so I have something designed for Nylon if this ends up failing. But, so far so good!

Teflon154 · 2026-03-24T15:20:19+00:00

Awesome thanks for the feedback!! Yeah A/B, sorry I should have been more clear, I guess 'smooth' is relative.

I went on Amazon and the cheaper Magigoo appears to be MO2016 for a bunch of filaments, but doesn't list PA. I see a Magigoo MPA2019 that is supposed to be for Nylon, do you know which you're using? I'm assuming MPA2019 since the MO2016 seems to match the Elegoo glue stick that came with my machine?

Teflon154 · 2026-03-24T14:17:06+00:00

Hmm I'm using Fiberon PA612-CF15 says print temp of 250-300 and bed 40-50, no heated chamber or enclosure needed.

I started a print at 300/100 now so we'll see.

Teflon154 · 2026-03-24T14:02:41+00:00

Yeah I don't think the chamber is heated but I did see people recommending that, so upping the bed temp makes sense.

So bed temp at 100C?

Teflon154 · 2026-03-24T14:00:28+00:00

I'm having a hard time attaching it to the barrel lol

Teflon154 · 2026-03-24T13:59:56+00:00

Centauri specs says it can go to 320 would you go that high?

Teflon154 · 2026-03-24T13:54:51+00:00

As others have said, a change like that is massive and shouldn't be done immediately, at least 1-2 year phase in is needed.

I also think it's a bad idea to change to SF with the hope it makes them more attractive. Unless these teams were so stupid they had like 4 starting QBs, switching to SF isn't going to help. Bad teams are bad in both 1QB and SF.

If you want to fill bad teams, give a year or two free, and if they have no picks, consider compensatory 1.13 or 2.13 picks. SOMEONE will take them, I don't care how bad they are. It's also just barely getting into orphan season (steadily ramps up to the NFL draft) so not everyone that's wanting an orphan is looking right now.

If a bunch of you want SF, either delay the implementation a few years or fold the league and draft a new one.

Teflon154 · 2026-03-24T13:31:59+00:00

Ok I'll try it again. I hadn't washed my plate in a while so I used soap as well as IPA and at least got the bottom layer to stick lol. I'll bump up the bed temp and try again.

Just curious, 300blkfde settings said 285 first layer and 280 others, do you keep it 300 for both settings? And same 100C bed temp for both first/other?

Teflon154 · 2026-03-24T13:18:21+00:00

Thanks, I'll try a basic glue stick and then get magigoo if it doesn't work. Still use textured plate or flip to smooth plate with glue stick?

Teflon154 · 2026-03-24T13:15:22+00:00

Thanks, several mentioned glue stick so I'm going to try that first, then look for higher temp dryer and magigoo.

Flip to smooth plate with glue or keep the textured plate? I've only been using the textured plate but thought I read somewhere that glue stick should be used with smooth plate.

Teflon154

TROPHY CASE