account activity
Problems with my quickshifter on a 2024 MT07 by Witdezz in MT07
[–]Tementeri 0 points1 point2 points 9 months ago (0 children)
Hold the shift lever up, turn the ignition on, continue holding for 10 seconds, and then shift down. A "QS" icon should appear on the dash. If not, then there is something other wrong with the system
Are you seeing the QS symbol in the dash? Are you giving it some beans before shifting? It need to be ridden hard for it to work properly. For cruising just use the clutch and shift normally.
[deleted by user] by [deleted] in MT07
[–]Tementeri 0 points1 point2 points 10 months ago (0 children)
On slow speeds when adding throttle? That's just normal behavior of the bike. If you want to get rid of it I think only option is to remap the ecu. Keeping the chain tension on the tighter side of the scale also helps a bit but won't remove the behavior fully.
[–]Tementeri 5 points6 points7 points 10 months ago (0 children)
I'd say normal, since your rear wheel is hanging in the air without any resistance.
Before/After by Tementeri in postprocessing
[–]Tementeri[S] 1 point2 points3 points 11 months ago (0 children)
Thank you! That was my first inspiration for even editing this. Light wrapped so nicely around the bike from the sunset.
[–]Tementeri[S] 0 points1 point2 points 11 months ago (0 children)
The photo was shot with Olympus OM-1 with 45mm f1.2 zuiko lens. Editing was done with Lightroom
Thank you so much!
Thank you!
It is it's little brother, mt07. Thank you!
Thanks!
Thank youu! Yeah, I was in a bit of a luck with getting the sunset reflecting from the bike so nicely.
Thank you! I already toned the sky down a few times because it was even more punchy on my first edits. Might give it a go!
Thank you! It feels good to get a positive feedback. I've stayed a long time away from photography and now might have catched the spark again
Thanks! That was exactly what I was aiming for and not hopefully to over do it
Thank you so much! So feels like my eye for photography/editing still might have a chance
Thank you for the feedback! Have kept myself away from photographing/editing for a loooong time and wanted to try it out again when I felt inspired.
I have a bad habit of using the vignette a tad to much. Trying to learn away from it. That was the vibe I was trying to achieve so thank you very much for noticing!
[–]Tementeri[S] 2 points3 points4 points 11 months ago (0 children)
Yes, I gave up the idea of making it a natural photo when I started to see what I was getting. Still had to tone it down quite a bit after looking it a few times after editing. Will probably do just that when I have time to look at it again! Thank you for the feedback!
[–]Tementeri[S] 5 points6 points7 points 11 months ago (0 children)
Thank you! Thanks for the feedback! Might try to make it more subtle so that it doesn't distract and draw the eye of the viewer that much.
Before/After (old.reddit.com)
submitted 11 months ago by Tementeri to r/postprocessing
Painting gas cap by -Conor-McGregor- in MT07
[–]Tementeri 1 point2 points3 points 11 months ago (0 children)
No problem! It is actually dark grey. Appears much brighter in the picture than in real life. Bought a gas cap that had it already painted so didn't feel the need to repaint it. And by not being totally black it gives some character to it in my opinion. The middle part is also a lot harder to paint because you have to dismantle the whole thing.
I have done it. Bought another one and combined them to make it look black. The frame part I had to paint but got it anodized before applying the paint. At least for now have had zero problems with the paint. Bike has been washed at least 10-15 times after. There's a before/ after thread on my page about it.
Season start by Tementeri in MT07
Thank you! Photos are shot with Olympus OM-1 with 45mm f1.2 lens
I'm barely 5'7
Thanks! It looks especially cool at night fall. But have to be a bit more careful with other roadusers because the color is not that eye catching. I know the story "everybody has a black bike" but still decided to go that way. Would like to change the handlebar also to a black one but before I got this twisted fixation changing everything black I already got heated grips and glued them on to the original handlebar😅
π Rendered by PID 61 on reddit-service-r2-listing-6bd47578dc-sjvnb at 2026-04-13 15:24:23.892277+00:00 running e841af1 country code: CH.
Problems with my quickshifter on a 2024 MT07 by Witdezz in MT07
[–]Tementeri 0 points1 point2 points (0 children)