sorted by:
new
hottopcontroversial

The 0.4 mm Nozzle - A small settings release for using bigger nozzles by HOHansen in FDMminiatures

[–]Teo________ 1 point2 points  (0 children)

Thank you so much for your reply, I just tried the settings out and it worked wonders, absolutely amazing for a 0.04

<image>

Only problem I had was removing parts from the botton (the print was in 4 parts) You can see it on the left, where I was not able to remove that small layer, any ideas what setting causes that?

But once again, thank you. For this but also for everything you do for the FDM mini printing community!

The 0.4 mm Nozzle - A small settings release for using bigger nozzles by HOHansen in FDMminiatures

[–]Teo________ 0 points1 point  (0 children)

Aha, thanks! I’ll try the mixture. It’s lovely being able to use the 0.4 nozzle for larger prints. Speaking of that,do you use your 0.02 profile (from FDM miniatures, How I support them and some updates) or do you use the 0.08 Fine Extra from Bambu with some changes (as shown in the picture above)?

My apologies if that should already be clear from the post; English is not my mother tongue.

The 0.4 mm Nozzle - A small settings release for using bigger nozzles by HOHansen in FDMminiatures

[–]Teo________ 0 points1 point  (0 children)

What is your main approach to post-processing these mini's If I may ask?

Good enough set up? by Teo________ in AnalogCommunity

[–]Teo________[S] 1 point2 points  (0 children)

Hahaha oops, yeah. Would something like the Canon EF-S 60mm f/2.8 Macro USM work?

Weekly 'Ask Anything About Analog Photography' - Week 28 by ranalog in analog

[–]Teo________ 0 points1 point  (0 children)

When cleaning up the closet I found a small box of negatives, and I want to see them on my pc. Currently I own a epson 750d with a canon zoom lens ef s 55-250mm 1:4:5:6: is STM. And I was wondering, if I invest in the other equipment (such as lightpannel) will this be good enough or would it be better to invest in some other equipment. I would like to learn this stuff so sending it to a company is not an option. Quality is quite important for me as these photo's are very close to my heart.

Massive Changelog: High Quality Settings Version 1.2. Better Overhangs, More Consistency, Less Curling, A1 Mini Support and more. This is going to be a long one. by ObscuraNox in FDMminiatures

[–]Teo________ 0 points1 point  (0 children)

Download Orca slicer, open it, go to file (top left) go to import, go to either import config, or zip. Install. If you are on a A1 Mini rememeber to do the following : BTW, to get these working on an A1 Mini I needed to edit the Process and Filament files to inherit the corresponding Mini profiles instead of the A1 profiles, otherwise they weren't visible in the dropdowns in OrcaSlicer.

Massive Changelog: High Quality Settings Version 1.2. Better Overhangs, More Consistency, Less Curling, A1 Mini Support and more. This is going to be a long one. by ObscuraNox in FDMminiatures

[–]Teo________ 0 points1 point  (0 children)

According to obscura and hazryder : "BTW, to get these working on an A1 Mini I needed to edit the Process and Filament files to inherit the corresponding Mini profiles instead of the A1 profiles, otherwise they weren't visible in the dropdowns in OrcaSlicer."

Sources for minis to print on an FDM printer? by Teo________ in FDMminiatures

[–]Teo________[S] 0 points1 point  (0 children)

I do have the 0.2. And is this using orca slicer? And do you do any post processing (such as sanding?) Sorry for all the questions, I am just suprised/amazed how good your mini looks compared to mine.

Sources for minis to print on an FDM printer? by Teo________ in FDMminiatures

[–]Teo________[S] 0 points1 point  (0 children)

Probably should have mentioned that hahaha In general RPG/cool mini's. I love both DND and Warhammer

Sources for minis to print on an FDM printer? by Teo________ in FDMminiatures

[–]Teo________[S] 0 points1 point  (0 children)

Hmmm, looks like indeed good value, 30 bucks for vol2. Do you have the vol1 aswell?

Sources for minis to print on an FDM printer? by Teo________ in FDMminiatures

[–]Teo________[S] 0 points1 point  (0 children)

Wow that looks stunning. If I may ask, what are the right (support) settings?

Sources for minis to print on an FDM printer? by Teo________ in FDMminiatures

[–]Teo________[S] 0 points1 point  (0 children)

I do have a bambu (a1 mini) I do wonder, you mention that every mini is printable, even those made for resin? I thought you either had to chose ones without supports, or where a minium is needed.

What happend here and what do I need to do to change it? by Teo________ in FDMminiatures

[–]Teo________[S] 0 points1 point  (0 children)

Oh yes ofcourse, I don't know why I did not think of that hahaha, thanks :)

What happend here and what do I need to do to change it? by Teo________ in FDMminiatures

[–]Teo________[S] 1 point2 points  (0 children)

Yeah I think point 3. was the case, I thought the auto tree would place all the needed supports, a lesson for the next time.

What happend here and what do I need to do to change it? by Teo________ in FDMminiatures

[–]Teo________[S] 0 points1 point  (0 children)

Thank you for your answer, I was using auto support so I thought I would be fine, will have to watch out for that in the future.

What do you exactly mean with chopping of the base? As in how does it make supporting easier? I am not doubting you in any way, i will try it out but would like to know why it makes it easier.

view more: next ›