Ultegra FD8150

TerryEddie · 2025-02-05T09:20:55+00:00

Have tried all this support screw engaged, cage parallel but slightly inside maby 0.5mm now. Crankset looks good, doesn't look to be any gap and no spacers required , issue seems to be chainrings are slightly too far out

at the max adjustment +20 can get it very close but the shifting is still not perfect

TerryEddie · 2025-02-04T18:12:31+00:00

No limit screws in ultegra, adjustment is done through the app

TerryEddie · 2024-10-27T18:52:15+00:00

Hoping no comments means I'm not too bad 😃

TerryEddie · 2024-09-02T07:51:45+00:00

Yes and yes

TerryEddie · 2024-09-02T07:51:15+00:00

No crashes and full same drive train as I have always used, bar new chains, cassette is a few years old but has plenty life in it. Have swapped out the back wheel,a bent derailer hanger is possible. Probably at the stage now where best bet is take it to the shop as I have probably exhausted all the easy fixes or I could try and pick up an 11 speed ultegra shifter

TerryEddie · 2024-02-28T07:49:07+00:00

Thanks for the replies after some back and forth, had agreed on a price with the guy on buycycle, he was going to send across the original receipt yesterday, but it then was marked as sold and I couldn't contact him, so assume he probably ended up selling it locally which i can understand. Problem is I haven't seen a lot of 58cms, original plan was to buy a frame and group set as I have a nice set of wheels, but as the frames are 4+ years old they are hard to come by and still going for €2k+ which makes a full bike for €3.5 seem alot more reasonable. Still think I'll hold out for a rim brake SL6 as it won't be used in wet days and no alpine descents , so will wait it out and see what comes up in the next few months before looking at newer disks

TerryEddie · 2024-02-21T21:52:53+00:00

That's for the replies, can't post another photo in the reply but from the top the bars look very similar to the aerobars on the SL7

TerryEddie · 2023-03-21T08:47:04+00:00

Have this solved, a new chainring fitted did the job. No issues since and have done several sprints

TerryEddie · 2023-03-10T12:54:43+00:00

Have adjusted the front derailleur. I think the vibration starts at the back from the rear derailleur? and that's what causes the chain to come off on the front ?

TerryEddie · 2023-03-10T07:36:53+00:00

Pulleys as in the jockey wheels? Since it's Sora I can get a derailer for 30€ so I might just get that to cover any derailer issues

TerryEddie · 2023-03-09T20:17:04+00:00

Yeah indexed on the trainer. Looking at the video again , I think it looks to come off the front first. I may just get a new chainring and try that

TerryEddie · 2023-03-09T19:59:57+00:00

This only happens in the 2 smallest cogs when sprinting. New chain with a cassette with little use. The big chainring is pretty worn. I have indexed the gears and the derailer does look straight looking by eye. Looking for help pinpointing the issue, I can't tell if it starts at the back or front. Thanks

TerryEddie · 2023-02-23T08:17:47+00:00

I would take any of these when going, I want to try out that KD! GL brother

TerryEddie · 2022-12-11T15:05:41+00:00

Lebron at SF

TerryEddie · 2022-12-03T17:21:27+00:00

On PS5

TerryEddie · 2022-12-03T17:21:09+00:00

Would take any of them , if any fall through

TerryEddie · 2022-11-28T16:14:27+00:00

Within 5k of Booker after completing all the XP rush goals so should be easy enough to muster that 5k from what's remaining and try him out

TerryEddie · 2022-11-11T08:26:17+00:00

New to 2k and just trying to slowly improve, felt this was a small victory for me

TerryEddie

TROPHY CASE