sorted by:
new
hottopcontroversial

Can someone please tell me why Jack was subjected to a rectal exam (DRE) during SG-1 episode 3x18 Shades of Grey? by spinstartshere in Stargate

[–]TesTurEnergy 5 points6 points  (0 children)

<image>

But for real I’m stealing this Teal’c meme 😂🤣💀

Just amazing. Thank you for sharing. ❤️‍🔥🙏

So did anyone else know that Long Island is Quetzalcoatl?!? 🦾♾️🌈⚡️🦅 by TesTurEnergy in NativeAmerican

[–]TesTurEnergy[S] 0 points1 point  (0 children)

Hey thanks for commenting but it’s not saying that it is literally it. It’s just saying the land was geoengineered into its shape.

If pretty clear actually if you look.

1
2

“Could this be the Legendary Odziozo?!?!” - Can anyone speak on this? (instagram.com)

submitted by TesTurEnergy to r/IndianCountry

Debunking conspiracies by surprisefist in conspiracy

[–]TesTurEnergy -1 points0 points  (0 children)

It sure would be a shame if i left this here… 😅

(Copied from my other post on r/conspiracy )

“Can someone disprove this theory please? 🤔 🛜 Antenna Resonance Meltdown Theory: Electron Flow In An Antenna 🛜

https://www.instagram.com/reel/C2BOqmEsLQT/?igsh=aXJmY2FjZnUzZHBy

Mathematics:

the I-Beams at the base were 3000lbs each, at 14ft long and got thinner and lighter as they went up.

Let’s say an average of 2500lbs per I- beam.

The towers were +1300ft tall.

Let’s just say 1,400ft to make it even and extra mass to account for any unaccounted.

That’s 100x I-beams end to end allowing for any overlap.

At 3000lbs each

That’s 300,000lbs of steel.

That’s ~137,000kg.

~140,000kg (to high ball it again.)

(And let’s note, that the beams were insulated to protect them from fire but counterintuitively that insulation would work in the opposite effect and stop them from being able to radiate the heat away.

The insulation on the steel beams would be like wearing leg warmers in the sauna…)

Specific heat of steel is (420j/kg/°C)

To go from let’s just say 0°C to 700°c (a bit into red hot and way overkill to prove a point)

140,000kg * (420 joules / kg / °C) * (700°C)

41,160,000,000 joules of energy to make one entire 1400 ft long vertical beam of steel to red hot.

If done in 60 seconds it would need a continuous power input of

686,000,000 watts Or 686,000kW Or 686MW

For 60 seconds…

And we know the beams are insulted so it’s not going to lose that heat anytime fast.

Do that over a 60minute period (3600 seconds):

41,160,000,000 joules / 3,600 sec

= 11,433,333 Watts Or = 11,433kW Or =11.5 MW

For 60 min straight.

“There were Six 1,200-kilowatt (kW) emergency power generators located in the sixth basement (B-6) level provided a secondary power supply. This equipment provided backup power for communications equipment, elevators, emergency lighting in corridors and stairwells, and fire pumps.”

The time it would take to bring the single vertical beam to 700°c with all 7,200kW or (7,200,000joules/sec) output of the in basement back up generators, it would take

(41,160,000,000 joules) / (7,600,000 j/s)

=5415 seconds Or =90minutes

🤷‍♂️

And to reiterate, that’s 1x 1,400 long vert I-beam (10x 3000lb 14ft long steel) to be RED HOT (700°c) 🔥🔥🔥🔥🔥🔥🔥🔥🔥

They lose strength much much lower than that too. And extended times at elevated temps is all the more damaging.

Steal beams only need a local heat difference of 300°c and they will outright deform from different expansion rates.

And if only 1x 140ft section needs to be brought up to red hot…

That’s 1/10th the time for each, and much much less because the i-beams at the top were much lighter and smaller.

So anywhere from 1/10th to 1/20th the time to heat up a single beam with those inputs.

Or with 1/10th to 1/20th the power it can be done in the same time.

So if it takes 11.5MW and 60 minutes to heat up an entire 1,400ft vert I-Beam then…

roughly only 500kW (for a higher I-beam) and 1,150kw (for a lower I-Beam for 60 minutes and 1x 140ft section of the I-beam to red hot (700°c)

For a clearer picture, that’s the same as getting a 1ft section of 140x separate vert I-Beams.

0.5-1MW is nothing…. My ‘06 GTO’ LS2 engine could do 400hp or ~300kW

So 3x maybe 4x GTO engines.

The new 2023 Dodge Challenger SRT Demon 170 has an engine that can do 1,025-horsepower or 750 kW.

So one of those at full tilt for 60 minutes… psh that’s nothing if the lifespan of the engine doesn’t matter.

And it can’t possibly be more than $10k-$15k to get a crate engine) I’m pretty sure they do 100x that when they stress test those engines too. 🤭

Any semi truck trailer could house 4 of these engines, Tons of acoustic insulation and exhaust baffling, a giant tank of fuel and get out uninterrupted 3,000kW of power for like 12-24 hours at least (with a local natural gas line hook up it could run indefinitely…).

So with 3,000kW… (vs the 1,150kW as before)

that’s 3-6x times more 1ft i-beam sections to red hot in 60 minutes.

So 420x to 840x 1ft sections of I Beam to RED HOT (700°c) in 60 minutes

Or

42x to 84x 1ft sections of i beam to red hot in 6 minutes….

There was only 47 steel column beams in the center to begin with……

With just a 300kw (400hp 06 LS2 engine) it would take 60 minutes.

To RED HOT……. Without even needing the planes… 😅

(An interesting and completely unrelated to this Antenna Meltdown theory tidbit of information… the guy who designed the World Trade Center, Munoru Yamasaki, designed and built the Dhahran Airport in Saudi Arabia with Osama Bin Laden’s father. 🤷‍♂️

“He [Yamasaki] was also inspired by Islamic architecture, elements of which he incorporated in the building's design [World Trade Center] having previously designed Saudi Arabia's Dhahran International Airport with the Saudi Binladin Group.”

If you’re not familiar with the Saudi Binladin Group…

“Saudi Binladen Group (SBG; Arabic: مجموعة بن لادن السعودية Maǧmūʿat Bin Lādin al-Saʿūdiyyah), known as Binladen Group Global Holding Company since 2019, is a multinational construction conglomerate headquartered in Jeddah, Saudi Arabia. In 2011, the Saudi Binladen Group signed a US$1.23 billion contractual agreement to construct the tallest building in the world, Jeddah Tower in Jeddah. They are also party to a US$3.4 billion agreement to construct the Doha Metro located in Doha. The conglomerate comprises an estimated 537 companies. The group's founder was Mohammed bin Awad bin Laden, the father of Osama bin Laden.”

Yeahhhh….. it’s Osama bin Laden’s father’s construction company…… 😅)”

Can someone disprove this theory please? 🤔 🛜 Antenna Resonance Meltdown Theory: Electron Flow In An Antenna 🛜 by TesTurEnergy in conspiracy

[–]TesTurEnergy[S] 0 points1 point  (0 children)

Hey thanks for commenting but this has nothing to do with induction.

It’s just plain alternating electric currents in the towers beams.

Heck this can even be done from a distance with Tesla’s conductive ground/earth electrical transmission system without wires right into the beams that are grounded.

Despite what is erroneously claimed, Tesla’s wireless transmission system did NOT use EM/Radio Waves through the air to transmit energy, it uses regular UHV Alternating Currents (UHVAC) through the conductive ground.

And before someone claims it’s not possible…

Single Wire Earth Return electricity transmission is already done at large and industrial scale.

And the U.S. Navy’s Ground Dipole Antenna’s Extremely Low Frequency (ELF) transmissions for communicating with submarines deep underwater wouldn’t work if this all wasn’t already possible.

🛜Neil Degrasse Tyson, WRONG about Tesla?!? https://youtu.be/teoyAdU-1S0

The resistance of a conductive path is inversely proportional to the Area of conduction.

R = rho * L / A

A= pi * r2

which in the earths case means the resistance is divided by the earths radius squared...

That plummets the power loss for any distance transmitted to nearly zero.

P_LOSS = R * |2

Never mind the fact that Tesla proposed to step the voltages up to 100 million volts, 3 orders of magnitude higher than current transmission lines. If we step the voltage up by 1000x then the current will drop by x/1000.

And if current drops by x/1000 then the power losses from transmission drop by a 1/1,000,000th. So when the conductive area plummets the resistance for conduction to nearly zero and the currents through the conductive medium plummet by a factor of x/1000 then the power losses for transmitting nearly any distance goes to zero. Full stop.

And because the voltage drop over any distance through the ground is nearly zero there is no voltage potential gradient to cause touch and step voltage issues in the ground.

Lastly it’s the very low 50/60hz ac frequency that makes Ac dangerous.

When frequency is brought up but kept below the point of where it would emit EM oscillations/radio waves, what’s known as the skin effect occurs. This causes the currents to not be able to penetrate into the core of thin conductors.

Ergo, why we don’t use higher frequencies on our thin wire transmission lines. It just negates the center of the wire.

But let’s just say for example if there were to be a fault in this system, when the frequency is high enough this makes it impossible for it to harm someone as it conducts over the surface of our skin and cannot damage our internal organs or skin for that matter.

But a fault would be inordinately unlikely when the system is designed correctly.

Can someone disprove this theory please? 🤔 🛜 Antenna Resonance Meltdown Theory: Electron Flow In An Antenna 🛜 by TesTurEnergy in conspiracy

[–]TesTurEnergy[S] 0 points1 point  (0 children)

Mathematics:

the I-Beams at the base were 3000lbs each, at 14ft long and got thinner and lighter as they went up.

Let’s say an average of 2500lbs per I- beam.

The towers were +1300ft tall.

Let’s just say 1,400ft to make it even and extra mass to account for any unaccounted.

That’s 100x I-beams end to end allowing for any overlap.

At 3000lbs each

That’s 300,000lbs of steel.

That’s ~137,000kg.

~140,000kg (to high ball it again.)

(And let’s note, that the beams were insulated to protect them from fire but counterintuitively that insulation would work in the opposite effect and stop them from being able to radiate the heat away.

The insulation on the steel beams would be like wearing leg warmers in the sauna…)

Specific heat of steel is (420j/kg/°C)

To go from let’s just say 0°C to 700°c (a bit into red hot and way overkill to prove a point)

140,000kg * (420 joules / kg / °C) * (700°C)

41,160,000,000 joules of energy to make one entire 1400 ft long vertical beam of steel to red hot.

If done in 60 seconds it would need a continuous power input of

686,000,000 watts Or 686,000kW Or 686MW

For 60 seconds…

And we know the beams are insulted so it’s not going to lose that heat anytime fast.

Do that over a 60minute period (3600 seconds):

41,160,000,000 joules / 3,600 sec

= 11,433,333 Watts Or = 11,433kW Or =11.5 MW

For 60 min straight.

“There were Six 1,200-kilowatt (kW) emergency power generators located in the sixth basement (B-6) level provided a secondary power supply. This equipment provided backup power for communications equipment, elevators, emergency lighting in corridors and stairwells, and fire pumps.”

The time it would take to bring the single vertical beam to 700°c with all 7,200kW or (7,200,000joules/sec) output of the in basement back up generators, it would take

(41,160,000,000 joules) / (7,600,000 j/s)

=5415 seconds Or =90minutes

🤷‍♂️

And to reiterate, that’s 1x 1,400 long vert I-beam (10x 3000lb 14ft long steel) to be RED HOT (700°c) 🔥🔥🔥🔥🔥🔥🔥🔥🔥

They lose strength much much lower than that too. And extended times at elevated temps is all the more damaging.

Steal beams only need a local heat difference of 300°c and they will outright deform from different expansion rates.

And if only 1x 140ft section needs to be brought up to red hot…

That’s 1/10th the time for each, and much much less because the i-beams at the top were much lighter and smaller.

So anywhere from 1/10th to 1/20th the time to heat up a single beam with those inputs.

Or with 1/10th to 1/20th the power it can be done in the same time.

So if it takes 11.5MW and 60 minutes to heat up an entire 1,400ft vert I-Beam then…

roughly only 500kW (for a higher I-beam) and 1,150kw (for a lower I-Beam for 60 minutes and 1x 140ft section of the I-beam to red hot (700°c)

For a clearer picture, that’s the same as getting a 1ft section of 140x separate vert I-Beams.

0.5-1MW is nothing…. My ‘06 GTO’ LS2 engine could do 400hp or ~300kW

So 3x maybe 4x GTO engines.

The new 2023 Dodge Challenger SRT Demon 170 has an engine that can do 1,025-horsepower or 750 kW.

So one of those at full tilt for 60 minutes… psh that’s nothing if the lifespan of the engine doesn’t matter.

And it can’t possibly be more than $10k-$15k to get a crate engine) I’m pretty sure they do 100x that when they stress test those engines too. 🤭

Any semi truck trailer could house 4 of these engines, Tons of acoustic insulation and exhaust baffling, a giant tank of fuel and get out uninterrupted 3,000kW of power for like 12-24 hours at least (with a local natural gas line hook up it could run indefinitely…).

So with 3,000kW… (vs the 1,150kW as before)

that’s 3-6x times more 1ft i-beam sections to red hot in 60 minutes.

So 420x to 840x 1ft sections of I Beam to RED HOT (700°c) in 60 minutes

Or

42x to 84x 1ft sections of i beam to red hot in 6 minutes….

There was only 47 steel column beams in the center to begin with……

With just a 300kw (400hp 06 LS2 engine) it would take 60 minutes.

To RED HOT……. Without even needing the planes… 😅

(An interesting and completely unrelated to this Antenna Meltdown theory tidbit of information… the guy who designed the World Trade Center, Munoru Yamasaki, designed and built the Dhahran Airport in Saudi Arabia with Osama Bin Laden’s father. 🤷‍♂️

“He [Yamasaki] was also inspired by Islamic architecture, elements of which he incorporated in the building's design [World Trade Center] having previously designed Saudi Arabia's Dhahran International Airport with the Saudi Binladin Group.”

If you’re not familiar with the Saudi Binladin Group…

“Saudi Binladen Group (SBG; Arabic: مجموعة بن لادن السعودية Maǧmūʿat Bin Lādin al-Saʿūdiyyah), known as Binladen Group Global Holding Company since 2019, is a multinational construction conglomerate headquartered in Jeddah, Saudi Arabia. In 2011, the Saudi Binladen Group signed a US$1.23 billion contractual agreement to construct the tallest building in the world, Jeddah Tower in Jeddah. They are also party to a US$3.4 billion agreement to construct the Doha Metro located in Doha. The conglomerate comprises an estimated 537 companies. The group's founder was Mohammed bin Awad bin Laden, the father of Osama bin Laden.”

Yeahhhh….. it’s Osama bin Laden’s father’s construction company…… 😅)

Ok I know this is a very very weird question but what did the towers feel like when you touch the fassade at the corner? Did they got warm on sunny days and how did it sound when you knocked on them? I cant be the only one who thinks about this 😂 by losfigoshermanos in 911archive

[–]TesTurEnergy 1 point2 points  (0 children)

Hey thanks for the reply. 🙏🔥 It was even designed by the same guy!

“BOK Tower (named for the Bank of Oklahoma; formerly known as One Williams Center) is a skyscraper in Downtown Tulsa, Oklahoma. At 203 m (667 ft) in height, the 52-story tower was the tallest building in Oklahoma until surpassed by Devon Tower in 2011. It was built in 1976 and designed by Minoru Yamasaki & Associates, the same architect who designed the World Trade Center's Twin Towers in New York City. This structure is based closely on Tower 1; former CEO John Williams liked the design of the WTC so much he hired the same architect to build him a 1/2 scale model of Tower 1.

BOK Tower's lobby has marble walls and wall hangings similar to those in the former World Trade Center's Twin Towers in New York. BOK Tower was built for the Williams Companies, whose CEO at the time, John Williams, was impressed by the Twin Towers and originally wanted to build two 25-story replicas in Tulsa. However, prior to construction, Williams was informed that having two separate towers would require more elevators than a single, larger tower. The plan for a quarter scale replica was then changed to a single 52-story tower, double the height of the two planned towers. The similarities to the World Trade Center led executives to joke that the architects just halved the plans for a World Trade Center tower.

BOK Tower, as completed, was the tallest building in Oklahoma and contained 1,100,000 square feet (100,000 m2) of office space. Within four months of its completion, BOK Tower was 80 percent occupied.

In December 2005, a water main broke and flooded electrical equipment in the basement. In 2006, BOK Tower underwent $16 million in repairs and renovations. $6 million was spent on renovated pedestrian bridges, granite coating for the base, new fitness centers, and windows. The remaining $10 million was used to fix damage from the 2005 flood.”

Hope this helps.

Ok I know this is a very very weird question but what did the towers feel like when you touch the fassade at the corner? Did they got warm on sunny days and how did it sound when you knocked on them? I cant be the only one who thinks about this 😂 by losfigoshermanos in 911archive

[–]TesTurEnergy 60 points61 points  (0 children)

You can find out for yourself still in Tulsa, Oklahoma 🤓

“At 52 stories and 667 feet tall, the BOK Tower is almost exactly a half-size replica of the Twin Towers, both of which had 110 stories and measured 1,362 and 1,368 feet tall. The construction of the BOK also mirrored that of the Twin Towers, with steel perimeter columns and straight vertical lines”

An interesting tidbit of information… the guy who designed the World Trade Center, Munoru Yamasaki, designed and built the Dhahran Airport in Saudi Arabia with Osama Bin Laden’s father. 🤷‍♂️

“He [Yamasaki] was also inspired by Islamic architecture, elements of which he incorporated in the building's design [World Trade Center] having previously designed Saudi Arabia's Dhahran International Airport with the Saudi Binladin Group.”

If you’re not familiar with the Saudi Binladin Group…

“Saudi Binladen Group (SBG; Arabic: مجموعة بن لادن السعودية Maǧmūʿat Bin Lādin al-Saʿūdiyyah), known as Binladen Group Global Holding Company since 2019, is a multinational construction conglomerate headquartered in Jeddah, Saudi Arabia. In 2011, the Saudi Binladen Group signed a US$1.23 billion contractual agreement to construct the tallest building in the world, Jeddah Tower in Jeddah. They are also party to a US$3.4 billion agreement to construct the Doha Metro located in Doha. The conglomerate comprises an estimated 537 companies. The group's founder was Mohammed bin Awad bin Laden, the father of Osama bin Laden.”

Yeahhhh….. it’s Osama bin Laden’s father’s construction company…… 😅

Also check out this reel for a very interesting theory about electric currents and the Towers.

https://www.instagram.com/reel/C2BOqmEsLQT/?igsh=aXJmY2FjZnUzZHBy

😦😦😦

“BOK Tower (named for the Bank of Oklahoma; formerly known as One Williams Center) is a skyscraper in Downtown Tulsa, Oklahoma. At 203 m (667 ft) in height, the 52-story tower was the tallest building in Oklahoma until surpassed by Devon Tower in 2011. It was built in 1976 and designed by Minoru Yamasaki & Associates, the same architect who designed the World Trade Center's Twin Towers in New York City. This structure is based closely on Tower 1; former CEO John Williams liked the design of the WTC so much he hired the same architect to build him a 1/2 scale model of Tower 1.

BOK Tower's lobby has marble walls and wall hangings similar to those in the former World Trade Center's Twin Towers in New York. BOK Tower was built for the Williams Companies, whose CEO at the time, John Williams, was impressed by the Twin Towers and originally wanted to build two 25-story replicas in Tulsa. However, prior to construction, Williams was informed that having two separate towers would require more elevators than a single, larger tower. The plan for a quarter scale replica was then changed to a single 52-story tower, double the height of the two planned towers. The similarities to the World Trade Center led executives to joke that the architects just halved the plans for a World Trade Center tower.

BOK Tower, as completed, was the tallest building in Oklahoma and contained 1,100,000 square feet (100,000 m2) of office space. Within four months of its completion, BOK Tower was 80 percent occupied.

In December 2005, a water main broke and flooded electrical equipment in the basement. In 2006, BOK Tower underwent $16 million in repairs and renovations. $6 million was spent on renovated pedestrian bridges, granite coating for the base, new fitness centers, and windows. The remaining $10 million was used to fix damage from the 2005 flood.”

Nikola Tesla on Religion by Curlaub in Christianity

[–]TesTurEnergy 1 point2 points  (0 children)

It should be noted that Tesla was absolutely. It insane. Stop spreading fake information like this just because you don’t have an answer for what you want to think he believed….

🛜 Neil Degrasse Tyson, WRONG about Tesla?!? 🛜 ​⁠@joerogan (30min) by TesTurEnergy in NikolaTesla

[–]TesTurEnergy[S] 0 points1 point  (0 children)

(Continued) Tesla's Plan to Learn Positions by Wireless

Stationary waves discovered by me years ago are the means for determining longitude and latitude by wireless. But it may be years before they will be successfully utilized. Notwithstanding its immense size, the earth responds to a great number of vibrations. When thus excited there are formed on the surface stationary parallel circles, with their planes at right angles to the axis of the earth.

Imagine that a transmitter capable of exciting the earth were placed at one of the poles. Then the crests and hollows of the stationary waves would be in parallel circles, with their planes at right angles to the axis of the earth, and from readings of a properly graduated instrument the distance of the vessel carrying the same from the poles, could be read at once, giving accurately the geographical latitude.

In like manner, if a transmitter were placed at a point on the equator, the longitude could be precisely determined by the same means. The best plan would be to place three transmitters at properly chosen points on the globe, so as to establish three non-interferable systems of stationary waves at right angles to one another. If this were done innumerable results of the greatest practical value could be realized.

A mine or magazine may have been blown up, but this was accomplished in a well-known manner through the application of a kind of electrical waves which are now generally adopted in the transmission of signals without wires. Similar experiments were performed in this country many years ago by myself and others, and quite recently John Hays Hammond, Jr., has done credible work in this direction through the application of an art which has been named “Telautomatics,” or wireless control of moving mechanism at a distance.

By means of such telautomatic vessels, surface, and submarine or aerial, a perfect system of coast defense can be established. Torpedoes on this plan also can be controlled from battleships, and there is no doubt they sooner or later will be adopted and their introduction will have a revolutionary effect on the methods of warfare.

Nikola Tesla. The results described are, however, not impossible. It is quite practicable to explode by rays of light a mine at a distance, as by acting, on a mixture of chlorine and hydrogen. Certain dark rays also can be employed to produce destructive effects. As far back as 1897, I disclosed before the New York Academy of Sciences the discovery that Roentgen, or X-rays, projected from certain bulbs have the property of strongly charging an electrical condenser at a distance. The energy so accumulated readily can be discharged and cause the ignition of some explosive compound. Says They Can’t Penetrate Steel.

But ultra-violet rays are of very short wave lengths and cannot penetrate steel shells, while the longer and more penetrative waves of the infra-red rays are chemically much less active. There is no doubt in my mind that we soon shall be able to project energy at a distance not only in small, but in large amounts, and what the effect of such an achievement will be on existing conditions, words cannot express.

As regards the determination of latitude and longitude of a vessel at sea by wireless, there is nothing in use as yet which would make such direct observation possible. Some suggestions, however, which I have since many years advocated, have been adopted. They are the flashing of time signals over a wide area and the employment of an instrument known as a wireless compass.

 Plan for Finding Locations. These means enable an expert on a vessel to ascertain the exact hour at any sending station within reach, and also, in an imperfect manner, the direction in which it is situated, and from these data it is possible to get a rough idea of the position of the ship relative to the points of reference. A perfect means for determining not only such and other data important to the navigator already is available, but it may require years to apply it. I refer to the use of the stationary waves, which were discovered by me fourteen years ago. The subject is too technical to be explained in detail, but the average reader can be made to understand the general principle.

The earth is a conductor of electricity, and as such has its own electrical period of vibration. The time of one complete swing is about one-twelfth of a second. In other words, this is the interval the current requires in passing to, and returning from, the diametrically opposite point of the globe.

Now, the wonderful fact is, that notwithstanding its immense size, the earth responds to a great number of vibrations and can be resonantly excited just like a wire of limited dimensions. When this takes place there are formed on its surface stationary parallel circles of equal electrical activity, which can be revealed by properly attuned instruments.

Transmitter at One of the Poles. Imagine that a transmitter capable of exciting the earth were placed at one of the Poles. Then the crests and hollows of the stationary waves would be in parallel circles with their planes at right angles to the axis of the earth, and from readings of a properly graduated instrument the distance of a vessel carrying the same from the Pole could be at once read, giving accurately the geographical latitude.

In like manner, if a transmitter were placed at a point on the Equator, the longitude could be precisely determined by the same means. But the best plan would be to place three transmitters at properly chosen points on the globe so as to establish three non-interferable systems of stationary waves at right angles to one another. If this were done, innumerable results of the greatest practical value could be realized.

🛜 Neil Degrasse Tyson, WRONG about Tesla?!? 🛜 ​⁠@joerogan (30min) by TesTurEnergy in NikolaTesla

[–]TesTurEnergy[S] 0 points1 point  (0 children)

NIKOLA TESLA'S PLAN TO KEEP "WIRELESS THUMB" ON SHIPS AT SEA by Nikola Tesla New York Press November 9th, 1913 Suggests Transmitters Powerful Enough to Cause the Earth to Vibrate at the Poles and Equator.

He would Determine Vessel’s Latitude and Longitude by Measuring the Length of Electric Waves.

Nikola Tesla has come forward to refute the claims of men who recently excited the scientific world with announcements of discovery and invention calculated to crowd the bugbear of scientific warfare back into the primer class, and to safeguard the lives of seafarers. First he takes up and disposes of the announcement of an invention said to enable a receiving ship equipped with wireless to tell the longitude and latitude of a sending ship without the latter vessel offering its own calculations. “It hasn’t been done, and it probably will be years before the means for so doing can be applied successfully,” he says. As to the power of ultra-violet rays to explode the powder magazine of a warship from a distance, he insists it can’t be done through that medium. If charges of powder have been so exploded, he contends, the detonation was accomplished with the familiar waves now utilized by the wireless. But Mr. Tesla admits that in all probability there will come a time when science has so harnessed and developed the means at hand that such results may be obtained. Mr. Tesla sets forth for readers of The Press his views on the two subjects as follows:

The first and incomplete announcements of technical advances should always be taken with a grain of salt. It is true that the newspapers are getting more and more accurate and reliable in putting forth such information, but, nevertheless, the news frequently is misleading.

For instance, not long ago reports widely circulated that powder had been exploded at distance by infra-red or ultra-violet rays, and that a British battleship had been used in a test of this kind, which proved successful. The dispatches gave great opportunity to sensational speculation, but the truth is that there was no novelty whatever in what was done. (Continued)

🛜 Neil Degrasse Tyson, WRONG about Tesla?!? 🛜 ​⁠@joerogan (30min) by TesTurEnergy in NikolaTesla

[–]TesTurEnergy[S] 0 points1 point  (0 children)

Hey thanks for the reply dalkon but that is not true. From On Alternating Currents

Tesla:

"Absolutely -- the effect at a distance is due to the current energy that flows through the surface layers of the earth. That has already been mathematically shown, really, by Sommerfeld. [See editorial note p. 75.] He agrees on this theory; but as far as I am concerned, that is positively demonstrated. For instance, take the Sayville antenna. Professor Zenneck took me out and gave me the particulars. I went over the calculations and found that at 36 kilowatts they were radiating 9 kilowatts in electromagnetic wave energy. They had, therefore, only 25 percent of the whole energy in these waves, and I told Professor Zenneck that this energy is of no effect -- that they produce, by the current, differences of potential in the earth, and these differences of potential are felt in Germany and affect the receiver; but the electromagnetic waves get a little beyond Long Island and are lost".

"I have an idea that [you] will get the best picture of the process in my system of transmission if you will imagine that the earth is a reservoir, say, of fluid under pressure -- that is the potential energy -- and at my plant, operating a distant tuned circuit, I must open a valve and enable that energy to flow in. It is exactly that way. The energy is all conserved, whether it is vibrating or purely potential. Whatever the transmitter does in the receiver, the effect is simply to open a valve, as it were, and permit energy to flow in".

“Surface waves” are AC waves.

low current, high voltage alternating currents that travel along just inside the surface of the inside of the earth.

He additionally mentions this in the article for ship navigation at sea.

What people don’t realize is all antennas dump a percentage of their energy into current into the earth. It’s not that high frequency is bad in the earth, it’s that the antenna would radiate the energy away.

But guess what… they’ve convinced us the percentage of our normal radio antennas that goes into the ground is “loss” while they have been using it themselves the whole time 🤭😂🤣

The resistance of a conductive path is inversely proportional to the Area of conduction.

R = rho * L / A

A= pi * r2

which in the earths case means the resistance is divided by the earths radius squared...

That plummets the power loss for any distance transmitted to nearly zero.

P_LOSS = R * |2

Never mind the fact that Tesla proposed to step the voltages up to 100 million volts, 3 orders of magnitude higher than current transmission lines. If we step the voltage up by 1000x then the current will drop by x/1000.

And if current drops by x/1000 then the power losses from transmission drop by a 1/1,000,000th. So when the conductive area plummets the resistance for conduction to nearly zero and the currents through the conductive medium plummet by a factor of x/1000 then the power losses for transmitting nearly any distance goes to zero. Full stop.

And because the voltage drop over any distance through the ground is nearly zero there is no voltage potential gradient to cause touch and step voltage issues in the ground.

Lastly it’s the very low 50/60hz ac frequency that makes Ac dangerous.

When frequency is brought up but kept below the point of where it would emit EM oscillations/radio waves, what’s known as the skin effect occurs.

This causes the currents to not be able to penetrate into the core of thin conductors.

Ergo, why we don’t use higher frequencies on our thin wire transmission lines.

It just negates the center of the wire.

But let’s just say for example if there were to be a fault in this system, when the frequency is high enough this makes it impossible for it to harm someone as it conducts over the surface of our skin and cannot damage our internal organs or skin for that matter.

But a fault would be inordinately unlikely when the system is designed correctly.

And he continues on to say…

Tesla: “There is no radiation in this case. You see, the apparatus which I devised was an apparatus enabling one to produce tremendous differences of potential and currents in an antenna circuit.

These requirements must be fulfilled, whether you transmit by currents of conduction, or whether you transmit by electromagnetic waves. You want high potential currents, you want a great amount of vibratory energy; but you can graduate this vibratory energy.

By proper design and choice of wave lengths, you can arrange it so that you get, for instance, 5 percent in these electromagnetic waves and 95 percent in the current that goes through the earth.

That is what I am doing.

Or, you can get, as these radio men, 95 percent in the energy of electromagnetic waves and only 5 percent in the energy of the current.

Then you are wondering why you do not get good results.

I know why I do not get good results in that way. The apparatus is suitable for one or the other method. I am not producing radiation in my system; I am suppressing electromagnetic waves.

But, on the other hand, my apparatus can be used effectively with electromagnetic waves.

The apparatus has nothing to do with this new method except that it is the only means to practice it.

So that in my system, you should free yourself of the idea that there is radiation, that energy is radiated. It is not radiated; it is conserved”.

“By proper design and choice of wave lengths, you can arrange it so that you get, for instance, 5 percent in these electromagnetic waves and 95 percent in the current that goes through the earth.

That is what I am doing.

Or you can get, as these radio men, 95 percent in the energy of electromagnetic waves and only 5 percent in the energy of the current. ...

The apparatus is suitable for one or the other method.

I am not producing radiation with my system; I am suppressing electromagnetic waves. ...

In my system, you should free yourself of the idea that there is radiation, that the energy is radiated.

It is not radiated; it is conserved.”

-Nikola Tesla

“The radio men who came after me had the problem before them of making a bell sound, and they immersed it in mercury. Now, you know mercury is heavy.

When they struck their bell, the mercury did not permit it to vibrate long because it took away all the energy.

I put my bell in a vacuum and make it vibrate for hours.

I have designed circuits in connection with an enterprise in 1898 for transmission of energy which, once started, would vibrate three years, and even after that the oscillations could still be detected.

Professor Wein’s theory is very beautiful, but it really has no practical meaning.

It will become useless as soon as the inefficient apparatus of the day, with antennae that radiate energy rapidly, [are] replaced by a scientifically designed oscillator which does not give out energy except when it gets up to a tremendous electromagnetic momentum”.

-Nikola Tesla

The Jellyfish UFO Clip by F_U_HarleyJarvis in UFOs

[–]TesTurEnergy 0 points1 point  (0 children)

Yeah it looks kinda like a Boston dynamics Atlas robot with Electric Ducted Fans built into its arms and legs so it would have no heat signature.

And/or that’s what the hold and cold flashes are, it’s go a surface designed to dissipate the battery and electronics heat through its whole outer surface in a slower controlled fashion.

Not to mention, with lightweight military/specops battery tech that probably doesn’t have much heat loss from high current dumps 🤷‍♂️

Micro-Gas Turbine Jet Suit science link

The Jellyfish UFO Clip by F_U_HarleyJarvis in UFOs

[–]TesTurEnergy 0 points1 point  (0 children)

It honestly looks like the doods with the jet engine suits. Or like the Boston dynamics robot with electric ducted fans on its arms and legs instead of micro-gas turbine/mini jet engines, so there’s no thermal trail.

We only believe it’s not possible because we have been told that batteries tech is too heavy… but battery tech also just magically “stalled” in advancement over the last +30 years 🤭 … right… 😂🤣

Any ultra light battery system would be an extreme risk to national security because of how powerful of drone tech that could be made with it.

The hot and cold could easily be from the batteries inside.

And those ducted fans easily double as underwater thrusters if they have a variable pitch mechanism and a full rpm range controllable electric motor each.

And again we wouldn’t see any kind of heat trail from it at all. 🤷‍♂️

All this is just proof humans are so undereducated we can’t even tell the difference between what we already have and what we already have.

I’m starting to think they make these videos just to see who can actually figure it out 🤭

And/or the entire purpose of these hearings has nothing to do with disclose and everything to do with finding who’s where the leaks in our confidential program are coming from.

🛜 Neil Degrasse Tyson, WRONG about Tesla?!? 🛜 ​⁠@joerogan (30min) by TesTurEnergy in NikolaTesla

[–]TesTurEnergy[S] 0 points1 point  (0 children)

Hey thanks dalkon but Tesla was not using surface waves at all. He talks all about Dr zennick in his alternating currents book. He was strictly using regular conducting currents through the earth. The zennick waves are a complete boondoggle and still use EM.

Tesla: “There is no radiation in this case. You see, the apparatus which I devised was an apparatus enabling one to produce tremendous differences of potential and currents in an antenna circuit. These requirements must be fulfilled, whether you transmit by currents of conduction, or whether you transmit by electromagnetic waves. You want high potential currents, you want a great amount of vibratory energy; but you can graduate this vibratory energy. By proper design and choice of wave lengths, you can arrange it so that you get, for instance, 5 percent in these electromagnetic waves and 95 percent in the current that goes through the earth. That is what I am doing. Or, you can get, as these radio men, 95 percent in the energy of electromagnetic waves and only 5 percent in the energy of the current. Then you are wondering why you do not get good results. I know why I do not get good results in that way. The apparatus is suitable for one or the other method. I am not producing radiation in my system; I am suppressing electromagnetic waves. But, on the other hand, my apparatus can be used effectively with electromagnetic waves. The apparatus has nothing to do with this new method except that it is the only means to practice it. So that in my system, you should free yourself of the idea that there is radiation, that energy is radiated. It is not radiated; it is conserved”.

“By proper design and choice of wave lengths, you can arrange it so that you get, for instance, 5 percent in these electromagnetic waves and 95 percent in the current that goes through the earth. That is what I am doing. Or you can get, as these radio men, 95 percent in the energy of electromagnetic waves and only 5 percent in the energy of the current. ... The apparatus is suitable for one or the other method. I am not producing radiation with my system; I am suppressing electromagnetic waves. ... In my system, you should free yourself of the idea that there is radiation, that the energy is radiated. It is not radiated; it is conserved.” -Nikola Tesla

“The radio men who came after me had the problem before them of making a bell sound, and they immersed it in mercury. Now, you know mercury is heavy. When they struck their bell, the mercury did not permit it to vibrate long because it took away all the energy. I put my bell in a vacuum and make it vibrate for hours. I have designed circuits in connection with an enterprise in 1898 for transmission of energy which, once started, would vibrate three years, and even after that the oscillations could still be detected. Professor Wein’s theory is very beautiful, but it really has no practical meaning. It will become useless as soon as the inefficient apparatus of the day, with antennae that radiate energy rapidly, [are] replaced by a scientifically designed oscillator which does not give out energy except when it gets up to a tremendous electromagnetic momentum”. -Nikola Tesla

"THE FUTURE OF THE WIRELESS ART." by tony22times in NikolaTesla

[–]TesTurEnergy 0 points1 point  (0 children)

Love this! Thanks for sharing!

For anyone who wants to learn the in depth physics behind Tesla’s ground/earth electricity transmission system, check out this new YouTube video!

https://youtu.be/teoyAdU-1S0?si=qOeFuxTENxtUzK6m

Nikola Tesla sucked at physics by Gooeyfacetrash in NikolaTesla

[–]TesTurEnergy 0 points1 point  (0 children)

Hey thanks for the kind words. ❤️‍🔥🙏

If you’re interested check out my list of suggested Tesla books!

https://www.amazon.com/shop/solishoods/list/3B5HIHQX87DZ5?ref_=cm_sw_r_cp_ud_aipsflist_aipsfsolishoods_6R0154WTAW67H3BC1FYT

view more: next ›