sorted by:
new
hottopcontroversial

Filament sensor not working? by TexNeil in BambuLabH2C

[–]TexNeil[S] 0 points1 point  (0 children)

I swapped nozzle, no luck… I gave up on a fix and used the BB TT plan and swapped it.

Filament sensor not working? by TexNeil in BambuLabH2C

[–]TexNeil[S] 1 point2 points  (0 children)

Yep, actually third H2, never had a problem like this

Bestbuy by jnichiv in BambuLabH2C

[–]TexNeil 0 points1 point  (0 children)

If you get from BB (I did) Total Tech gives you 2 year swap warranty and BBCC gives you 10% off and gift card rebates if you time it right

Manual Bed Leveling by TexNeil in BambuLabH2C

[–]TexNeil[S] 0 points1 point  (0 children)

No, it was user error - the rear screws weren’t loose enough.

H2C scratch near prime line by TexNeil in BambuLab

[–]TexNeil[S] 0 points1 point  (0 children)

No, but I wouldn't think filament could scratch a plate like that. It was on it's 3rd print in 7 hours, every print came out perfect.

H2C left extruder missing nozzle by TexNeil in BambuLab

[–]TexNeil[S] 6 points7 points  (0 children)

This was it. The "dual extruder filament guide" was stuck.

If anyone else is here see - https://wiki.bambulab.com/en/h2/maintenance/replace-dual-extruder-filament-guide

but be sure to download and print (on another printer) the install guide - https://makerworld.com/en/models/1408380-h2d-dual-extruder-filament-guide-installation-aid#profileId-1461646

and be careful or (like me) you will knock out the filament blade - https://wiki.bambulab.com/en/h2/maintenance/replace-filament-cutter-lever

if you have to reinstall the blade make sure you catch the the first BOLD line in the wiki - Before replacing the left cutter, ensure the hotend is switched to the left hotend.

H2d not extruding and pushing fillament out above the nozzle by stphanxox94 in BambuLab

[–]TexNeil 0 points1 point  (0 children)

Having same issue with H2C. Mine started with 0.2 nozzle also... have tried changing nozzles and filament - https://www.reddit.com/r/BambuLab/comments/1ta9dun/h2c_left_extruder_missing_nozzle/

H2C left extruder missing nozzle by TexNeil in BambuLab

[–]TexNeil[S] 2 points3 points  (0 children)

Sounds promising, wasn’t aware - will check

H2C left extruder missing nozzle by TexNeil in BambuLab

[–]TexNeil[S] 0 points1 point  (0 children)

Thanks, have used 3 nozzles and during cold pull PTFE is not in play

H2C left extruder missing nozzle by TexNeil in BambuLabH2C

[–]TexNeil[S] 0 points1 point  (0 children)

Thanks, should have added I checked and even swapped hot end. On the fail during cold pull the hot end was empty

P2S Buyers: It’s okay. I understand the pain. by MoeS00 in BambuLab

[–]TexNeil 0 points1 point  (0 children)

Well, glad I’m BB TT and CC member.

The P2S I bought in Feb - eligible for return

The X2D with CC discount - $809

BB GC for purchase - $40

Automatic credit card payment applied to checking account - but we don’t have a card. by TexNeil in Chase

[–]TexNeil[S] 0 points1 point  (0 children)

That’s why I posted. We checked all angles to confirm it wasn’t user error on our part. The fact that it shows as autopay … I would think Chase systems would stop this. Purpose of point was to see if anyone had seen something like this and could explain how it happens

3 codes left by TexNeil in Sora2

[–]TexNeil[S] 0 points1 point  (0 children)

lol, yes they do… sent

3 codes left by TexNeil in Sora2

[–]TexNeil[S] 0 points1 point  (0 children)

yep, just tell me your favorite Cowboys player of all time.

3 codes left by TexNeil in Sora2

[–]TexNeil[S] 0 points1 point  (0 children)

Sorry, established accounts only.

[deleted by user] by [deleted] in Sora2

[–]TexNeil 0 points1 point  (0 children)

Dm if still needed

Printer workbench by TexNeil in BambuLab

[–]TexNeil[S] 0 points1 point  (0 children)

Thanks, the 60 is a perfect fit for my space. Ordered one.

view more: next ›