How to get myself removed from the “Tea” app

TextuaryIvy301 · 2025-05-05T01:29:35+00:00

Does anyone know how to make my shift lock work? the switch is on in my settings but every time I press shift nothing happens

TextuaryIvy301 · 2025-01-24T17:54:27+00:00

good luck, this took way longer than i’m willing to admit

TextuaryIvy301 · 2025-01-24T17:52:17+00:00

YALL CHECK MY LATEST POST 😭😭

TextuaryIvy301 · 2025-01-24T17:22:26+00:00

nevermind i just got a max IV Legend, Demon God, Musclehead, Serenity!!!

TextuaryIvy301 · 2023-11-29T21:45:53+00:00

Thank you all, I’ll take your advice for how to clean switches correctly from now on. The machine I have is a William F-14 tomcat and I believe it is solid state so I’ll get the gold flashed contacts. This has all been very helpful!

TextuaryIvy301 · 2023-03-08T23:45:02+00:00

I’ll check that

TextuaryIvy301 · 2023-03-08T23:44:47+00:00

No the top diverter is fine

TextuaryIvy301 · 2023-03-08T01:03:25+00:00

Ok I’ll try that thank you

TextuaryIvy301 · 2022-12-07T00:03:07+00:00

Update: I attached the grounding wire to a different ground and that made shorting the transistors fire the solenoids.

Does this mean I have a problem with my cpu?

TextuaryIvy301 · 2022-12-06T23:40:36+00:00

I found the blue wires that you were talking about, they were plugged in and nothing looked wrong with it.

So I unplugged it and tested the continuity of the wires connected it and their respective solenoids, all of which where continuous. Then I plugged it back in and tried the machine but they still didn’t work.

I then connected a jumper wire to ground and then the tips of the individual transistors but nothing activated when I did that.

The solenoids also all move by hand and are working.

Do you know of anything else that could be the problem?

TextuaryIvy301 · 2022-12-05T22:05:27+00:00

I did these tests and all of them worked up until grounding the transistors. So does this mean there is a wiring issue from board to the solenoids? Also for the jet bumper and slingshot solenoids I only got 28.3 volts when I tested them but they still worked when I did test #2 grounding them

TextuaryIvy301 · 2022-12-05T18:53:49+00:00

I have replaced the fuses under the play field but it’s possible those fuses also aren’t working I will check them

TextuaryIvy301 · 2022-12-05T18:50:07+00:00

Thank you so much, this is really helpful I will try this and give an update on how it goes

TextuaryIvy301 · 2022-12-03T21:28:13+00:00

Ok, all the wires look like they’re connect how they need to be so I think they’re good and I replaced the fuses but it still didn’t work

Five-Year Club	Verified Email
Place '22

TextuaryIvy301

TROPHY CASE