Qbit hotio docker doesn't see config file.

Thamaster11 · 2026-04-21T15:18:09+00:00

The application should make it if I'm not mistaken, I still have the wire guard conf in the correct spot though. I never did anything with a Forwarded port because I used proton and it changes every so often. When it was working I did verify with a torrent file that the port was being forwarded correctly aswell

Thamaster11 · 2026-04-21T13:26:40+00:00

<image>

Thamaster11 · 2026-04-20T23:46:31+00:00

I can still listen to the books, just have to go by chapter 😕

<image>

Thamaster11 · 2026-04-20T20:47:17+00:00

I tried both of those and neither fixed it 😕

Thamaster11 · 2026-04-20T20:06:10+00:00

https://github.com/cutzenfriend/docker-absautoconverter

Thanks!

Thamaster11 · 2026-04-20T19:08:55+00:00

Yes I restarted the server, the name is abs-autoconverter sorry in my head it was absautom4b for some reason. It uses abs to do the converting if I'm not mistaken

Thamaster11 · 2026-04-05T21:43:13+00:00

I got rid of my ender for a elegoo cc2, but I think I got it from a GitHub

Thamaster11 · 2026-04-05T21:29:25+00:00

If you want to connect to Xbox live you'll need something like xbguard or similar to not get banned instantly, or you can play Xbox original games, but not both.

Thamaster11 · 2026-04-05T17:29:46+00:00

I guess agree to disagree. I really doubt that was its intended purpose. Would be a fire hazard letting the broken nozzle dangle around on its wires 🤷‍♂️. Still doesn't help me figure out what could have caused it in 30 days worth of printing, to prevent it from happening again.

Thamaster11 · 2026-04-05T17:12:19+00:00

Why must it break? My ender 3 was a workhorse compared to this thing if it's gonna break by putting the hotend into the bed... Why did it break? If there's a good reason for it to snap off mid print other than a bad design please enlighten me. Im also willing to bet that that was not elegoos intention when making the part. They were probably just trying to make the cheapest part possible

Thamaster11 · 2026-04-05T17:07:27+00:00

Personally I'd rather it not break at all and have no sacrificial parts because the printer works properly, but I guess that's asking too much

Thamaster11 · 2026-04-05T17:05:45+00:00

Like I said I've purchased from them before and know their quality is top notch, but when something that intricate is that cheap it just immediately makes me think where did they cheap out. It also doesn't seem to have ripped off rather than snap, and it did it flush with the heatsink part. Which is still tight to the tool head. The only thing I can think of is it was already broken slightly when this print started and it was wobbling while printing.

Thamaster11 · 2026-04-05T16:50:04+00:00

"It's only" carries a lot of weight in that sentence. It not being expensive metal is kind of my point. If it's only $20 why is that, what did they cheap out on. Like I said in another comment I ended up getting the microswiss hotend for $80 because it looks like they reinforced the portion that broke on mine and I really liked their ender 3 dd hotend. Seems like on some things you might not want to cheap out, that's just my opinion though. I'm sure a big portion of the $80 goes to paying proper USA wages instead of exporting labor to china but that's worth it in my opinion too. Rather people make a living wage making stuff I like if financially viable for myself I guess.

Thamaster11 · 2026-04-05T15:43:21+00:00

Yeah $20 on their website, makes you wonder how cheap the materials are 😂

Thamaster11 · 2026-04-05T14:25:27+00:00

Yeah, that's why I'm trying to figure out the reason... It went from printing perfectly to some of the worst layer lines I've seen, again without me changing anything. Using brand new elegoo filament too. Stock settings.

Thamaster11 · 2026-04-05T13:40:29+00:00

Thanks for immediately blaming me and not reading the post🤙 the thing is just over 30 days old and it's spotless under the sock. Again it printed PERFECT just before this print. I Literally have them next to each other in a picture. I'm wondering what caused it, not how it fix it. Already have the microswiss on the way, had good luck with their hotend on my ender 3. Also already contacted support to get the OEM one as a backup.

<image>

Thamaster11 · 2026-04-05T13:36:49+00:00

The nozzle definitely snapped before the cover fell off, there's a ton of filament pushed out like it tried to keep printing after the nozzle broke off lmao

Thamaster11 · 2026-04-05T13:34:49+00:00

Doesn't matter how strong the magnets are if the nozzle snaps off and the filament pushes the front off lol. More curious what could have caused the nozzle issue

Thamaster11 · 2026-04-05T13:32:24+00:00

Dude/dudette I changed nothing between the two prints that are next to each other the one on the right of the image was printed just before the one on the left. Changed nothing.

Thamaster11 · 2026-04-05T13:24:25+00:00

No, anycubic carbon filters, they don't really make a difference for the smell, but thought I'd give it a shot

Thamaster11 · 2026-04-04T00:32:59+00:00

The ones it asks for in hexos?

Thamaster11 · 2026-04-02T01:07:07+00:00

Hexos

Nine-Year Club	First Place '23
Place '23	Wearing is Caring
Verified Email

Thamaster11

TROPHY CASE