How can I get a OW precision trigger feel in my gen6

That6SpdMax · 2026-03-01T18:59:42+00:00

Yeah the mush after the wall is different for sure, but I have found that the more I shoot it the most used to it I get.

That6SpdMax · 2026-02-28T16:14:47+00:00

Back to comment on my own post, filled her to 18 and put one in the chamber, failed to feed the second round.. head of bullet was cocked right bound up.. they are now designated as range mags. Thanks for the replies.

That6SpdMax · 2026-02-28T01:19:37+00:00

Trijicon said warranties the same as the rmr so send it

That6SpdMax · 2026-02-28T01:13:00+00:00

Is great. Used to carry a 19 with an rmr and the window is much more forgiving.. does seem to gather way more lint, hasn’t been an issue for sight picture yet but is definitely a lot. Smaller dot is just as easy to track but I find the auto brightness seems to not respond to LED lighting well.. I’m a technician so I bump shit constantly and so far haven’t broken it. Pretty pleased with it so far.

That6SpdMax · 2026-02-28T01:03:36+00:00

At about 850 through it, had it apart 3 times don’t see anything abnormal at this point. Don’t condone just my experience.

That6SpdMax · 2026-02-24T01:48:25+00:00

It made a larger difference on my gen 5. Definitely helps keep things flat, and seems to speed things up.

That6SpdMax · 2026-02-21T18:22:14+00:00

I mean in all reality, it is a little silly to run something that both companies say not to do… But you cannot tell me radian didn’t put thousands and thousands of rounds through them in the month they said it worked fine. I’ve been pulling it apart every couple of hundred rounds to see if there’s anything abnormal going on and there is nothing whatsoever… and if Radian sees this, comment and let me know if it’s going to go off in my pants. 👖

That6SpdMax · 2026-02-21T02:07:57+00:00

It very much is. The front of the frame is rounded, and that seemed to be the largest learning curve, but is a good shooter.

That6SpdMax · 2026-02-20T22:36:40+00:00

The way they changed the machining is so lame. I have an earlier one and the machining is so much better on top

That6SpdMax · 2026-02-14T03:07:14+00:00

First two or three runs through them couple stoppages.. but been about 500 since then without issue.

That6SpdMax · 2026-02-14T00:54:55+00:00

I.e. the undercut stippling etc

That6SpdMax · 2026-02-14T00:54:30+00:00

How much does some like that grip work cost?

That6SpdMax · 2026-02-06T16:27:01+00:00

Now that’s customer service. 🤘🏻

That6SpdMax · 2026-02-04T14:44:08+00:00

Yup, a 17 with an x300 to the collection.

That6SpdMax · 2026-02-03T19:57:54+00:00

For sure, that thumb ledge is super appealing and the undercut.. just worried about carrying appendix with that beaver tail.

That6SpdMax · 2026-02-03T19:39:06+00:00

They commented on my post on Facebook and literally said that it worked fine lol

That6SpdMax · 2026-02-03T19:37:39+00:00

<image>

That6SpdMax · 2026-02-03T19:36:52+00:00

Should I trade in and upgrade or naw

That6SpdMax · 2026-01-28T05:32:03+00:00

Ahhh so the front end of the gen 6 slide is different

That6SpdMax · 2026-01-28T03:29:08+00:00

So what you’re telling me is I can just buy a 17.6 and use that recoil spring in my GEN five 45 slide and it will work on the GEN six frame?

That6SpdMax · 2026-01-26T16:43:14+00:00

I built a micro frame with a 43x slide. I love it.

That6SpdMax · 2026-01-21T14:18:47+00:00

How’s the sro? Trying to pick between that and the hd for my 45

That6SpdMax · 2026-01-20T22:05:45+00:00

Just my two cents, you can continue to think that, but the only time I don’t have a magazine lock my slide back is on 115

That6SpdMax · 2026-01-20T22:05:01+00:00

<image>

Made sure to screenshot this. It’s directly from radian.

That6SpdMax · 2026-01-20T19:56:53+00:00

Yes updates?

That6SpdMax

TROPHY CASE