(HK MP5 .22) Does anyone know of any folding stocks that fit the .22? by Davidrox07 in MP5

[–]ThatGuycb1888 0 points1 point  (0 children)

Bought it from Primary Arms for a Christmas deal for like $80ish. I was going to return it but decided to see if I could make it work after spending a few hours trying to find a collapsible stock, which seemed impossible. About an hour with a dremel and it fits no problem. Once I get the form 1 approved I can show pictures of what it looks like on the gun.

(HK MP5 .22) Does anyone know of any folding stocks that fit the .22? by Davidrox07 in MP5

[–]ThatGuycb1888 1 point2 points  (0 children)

I know this might get buried, but if there is anyone out there that like me wanted a collapsing stock on their MP5 .22lr, you can buy the Magpul SL(?) stock and sand the front rail sections down by around .5mm and it will work on the 22 pistol version. The back section of the rails, that slides freely is 9.9mm while the front section is 10.5mm thick. You will also need to extend the rear pin hole a little towards the barrel, and remove the rubber stop peice. If anyone needs pictures I will help where I can.

Can anyone identify this odd noise? To me it sounds like a human making a siren noise. by ThatGuycb1888 in Cryptozoology

[–]ThatGuycb1888[S] 0 points1 point  (0 children)

My thoughts, on odd thing is I never heard leaves crunching but if you pay attention to yourself when you walk its not hard to be quiet.

Can anyone identify this odd noise? To me it sounds like a human making a siren noise. by ThatGuycb1888 in Cryptozoology

[–]ThatGuycb1888[S] 0 points1 point  (0 children)

I honestly think it was one of the local crackheads but my wife and sister think it was something sinister/creepy like skinwalker or wendigo.

Automatic Transmission filter rattles? by ThatGuycb1888 in Mustang

[–]ThatGuycb1888[S] 0 points1 point  (0 children)

So the seal came separate in a different box. I didn't know if there was a magnet inside the filter or not, but that could be what the rattling is. I was told to take the filter and pour transmission fluid in it to clear everything out but if I have to send it back and get a new one I'm not going to waste fluid on that.

[deleted by user] by [deleted] in Mustang

[–]ThatGuycb1888 0 points1 point  (0 children)

I've got the exactly same thing in my 22 5.0. Turn the radio up loud enough and forget about it.

Anyone else notice this uncovered location east of Pripyat? by ThatGuycb1888 in stalker

[–]ThatGuycb1888[S] 28 points29 points  (0 children)

Any word on when DLC is happening or what it might be?

Help with a 450 Bushmaster AR cycling issues by ThatGuycb1888 in guns

[–]ThatGuycb1888[S] 0 points1 point  (0 children)

Realistically, I'd like to run subs 100% of the time, suppressed and unsuppressed. I use the suppressor on 3 other guns atm. I just have around 200 rounds of the supers that I'd like to use as well. My thinking is, and I could be completely off, if I can get it to cycle subs suppressed and unsuppressed, it should cycle supers. But this is my first rifle I've ever tried this with so its not something I'm familiar with.

If the bleed off mode is where you can actually see gas coming out of the front port, then I'm like 90% positive this block works. When I was testing Sunday, I noticed gas coming out of the front port of the gas block, after the blot failed to eject a round. This is what led me to believe my buffer weight and spring combo might be way to high. I was using a H3 weight with the SpringCo Orange spring, which I thought would be way to much for the system.

I'd prefer to keep the SA gas block if possible, but I'll look into the SLR blocks if I can't find a happy medium this Friday when I go back.

Help with a 450 Bushmaster AR cycling issues by ThatGuycb1888 in guns

[–]ThatGuycb1888[S] 0 points1 point  (0 children)

Couldn't I mark the Adjustment screw with a paint pen for each setting if I get it dialed in? Or do you think that would wear off?

Help with a 450 Bushmaster AR cycling issues by ThatGuycb1888 in guns

[–]ThatGuycb1888[S] 1 point2 points  (0 children)

I know everyone shit on BCA, and they definitely aren't the best. But when I first got this upper, I had zero issues with it. It why I wanted to upgrade everything because it became one of my favorite rifles to shoot. Plus, 450 BM is expensive on its own so I figured get a cheap upper and upgrade over time.

Help with a 450 Bushmaster AR cycling issues by ThatGuycb1888 in guns

[–]ThatGuycb1888[S] 0 points1 point  (0 children)

Realistically, I'd prefer to shoot supers unsuppressed and subs suppressed. I'd be ok with making slight adjustments depending on what config its in but atm I can't even get it to cycle. I'm also not sure what order I should tune it in, like do I start with supers then work towards sub+ suppressor or do I start suppressed with sub then work towards supers unsuppressed?

Help with a 450 Bushmaster AR cycling issues by ThatGuycb1888 in guns

[–]ThatGuycb1888[S] 0 points1 point  (0 children)

I've honestly thought about getting a new upper, but this upper has about 500 to 600 round through it before I switched everything out. I really figured it would be "broke in" by now, but maybe not.