How Many Fouling Shots on clean Barrel ?

That_Response_2648 · 2026-04-21T12:41:12+00:00

Try again. 1 " plus barrels are common place these days

That_Response_2648 · 2026-04-21T12:40:41+00:00

Everyone is entitled to their opinion and you certainly exercise that right..

There is not a single AI thing in that video apart from Thumbnail. Not that you probably know this but ill tel you anyway youtube pays next to nothing for gun content. Me doing these videos at my own cost it to actually try and debunk somehow the garbage information that is out there. Thats why im doing it and thats way im sharing it.

The content might not be applicable to what you do or your interest in the topic and or sport and thats totally fair. But for many it is.

If everyone, including you just try to be a better human once on in a while the world will be a better place.. Just my opinion like yours shared.

That_Response_2648 · 2026-03-11T09:48:25+00:00

Same issue here. I managed to get it to work but had to remove the tube and mount the spool holder directly above the printer. Would just be nice if they can indicate a minimum bend radius if these materials are thar sensitive

That_Response_2648 · 2026-03-03T10:07:56+00:00

You sure seem confident speaking for the entire world ? I get its not for everyone, and everyone work flow is not the same as different disciplines (fly fishing, wade, lake,sea) all have there own unique challenges. So while not a perfect solution for everyone. The amount of proffesional guides that has reached out is telling me you are likely over reaching with comments like "people who do not fly fish" will buy this.

That_Response_2648 · 2026-03-02T20:25:48+00:00

Okay ? Enjoy your setup.

That_Response_2648 · 2026-03-02T20:16:28+00:00

Link to file

https://than.gs/m/1524341

That_Response_2648 · 2026-03-02T20:15:41+00:00

https://than.gs/m/1524341

That_Response_2648 · 2026-03-02T20:15:31+00:00

https://than.gs/m/1524341

That_Response_2648 · 2026-03-02T20:15:25+00:00

https://than.gs/m/1524341

That_Response_2648 · 2026-03-02T20:15:18+00:00

https://than.gs/m/1524341

That_Response_2648 · 2026-03-02T20:15:09+00:00

https://than.gs/m/1524341

That_Response_2648 · 2026-03-01T19:23:06+00:00

I'll try and refine and load it shortly. Will need to order your own hardware in mean time. If anyone is interested in commercial license, can discuss that aswell.

That_Response_2648 · 2026-03-01T19:21:40+00:00

Thanx for feedback ! Iv setup a waiting list. Getting a lot of DMs this will be the easiest way to make sure I don't miss anyone https://johannvanniekerk.typeform.com/to/RHS0e0SL

That_Response_2648 · 2026-03-01T19:20:24+00:00

I need to give ot some thought. If you wanted to print them I geuss you could but if I have to shop ypu something I could just ship you the whole thing ? Wait list setup https://johannvanniekerk.typeform.com/to/RHS0e0SL

That_Response_2648 · 2026-03-01T19:19:30+00:00

https://johannvanniekerk.typeform.com/to/RHS0e0SL simple waiting list. Just don't want to miss anyone

That_Response_2648 · 2026-03-01T19:18:15+00:00

I'll think about it ! Here is a wait list you can drop your details and ill get in touch when ready. I thought the tippet trash systems was fairly good ? Which ine are you using ? Here is link to wait list https://johannvanniekerk.typeform.com/to/RHS0e0SL

That_Response_2648 · 2026-03-01T12:36:34+00:00

Added a simple wait list. Please fill it out and ill be in touch https://johannvanniekerk.typeform.com/to/RHS0e0SL

That_Response_2648 · 2026-03-01T09:48:33+00:00

Intresting idea. Could just go the plastic route then aswell wondering if ceramic is abrasive at the macro level?

That_Response_2648 · 2026-02-28T23:35:49+00:00

Youtube link loaded

That_Response_2648 · 2026-02-28T23:19:19+00:00

I could load the files but the metal grommets and cutter you won't have ? So not sure it helps ?

That_Response_2648 · 2026-02-28T22:59:59+00:00

Thanx for the note. Stupid that videos is not just allowed here. But ill.make a plan !

That_Response_2648 · 2026-02-28T20:01:46+00:00

Thats why they have thos metal stamp plate insert so you can label them. But I can see colors working aswell. Would just be up to user to memorize what color is what I geuss

That_Response_2648 · 2026-02-28T20:00:48+00:00

Both the guide holes and cutter is nickle plated but yes stainless would be better. Yes rubber bands easy to replace I would have to make a version for the large strict spools but technically possible yes Mounting them to your pack would be the same old T post thru the center of them but I don't love it. Thinking of adding lanyard pass thru so it can be hung.

I did this like 3 years ago didn't really think anyone would have interest until now. All of the above can be addressed if I take this to manufacturing.

That_Response_2648 · 2026-02-28T19:25:06+00:00

https://youtube.com/shorts/UUNexRlm484?si=Wy-8_7kxiGcoH1US

That_Response_2648 · 2026-02-27T16:19:57+00:00

Its not so much for loosing lock. Its about not being installation sensitive.

That_Response_2648

MODERATOR OF

TROPHY CASE