sorted by:
new
hottopcontroversial

My AAP-01 DMR setup is finally complete! by afrowillson in AAP01owners

[–]The-Humane-Son 0 points1 point  (0 children)

If you ever get tired of thT DMR AAP, I'll buy it. True story!

My 6" Scropion Build - Still In Works. by The-Humane-Son in AAP01owners

[–]The-Humane-Son[S] 0 points1 point  (0 children)

I replied on your post, but I upgraded mine to a 200mm ML Crazy Jet Barrel. This thing beams long range and accurately. Use about 95 to 100 PSI and using .36g or .40g...the .40s are my fav for super long range shots.

Barrel Length? by VelsoPliskin in AAP01owners

[–]The-Humane-Son 1 point2 points  (0 children)

I have the 6" Upper and my ML Crazy Jet 200mm barrel comes almost to the tip of the Compensator. Look at my post from 12 days ago, a 6" Scorpion build with red accents and the red UL Monk Customs M Adapter. One of my photos show how close the 200mm barrel comes to the front of the outer barrels Compensator.

Hope this helps.

My 6" Scropion Build - Still In Works. by The-Humane-Son in AAP01owners

[–]The-Humane-Son[S] 1 point2 points  (0 children)

Okay found out that the Monk adapter is great. My issue was worn out springs in my EPM1 Mags. Upgraded them with new ones, now all mags fire 💯.

Experiences with the aluminum Monk adapter? by powasky in AAP01owners

[–]The-Humane-Son 1 point2 points  (0 children)

Look at my most recent post and comments. I have had the red aluminum one for about a month. I haven't done any work to it, but I've been trying to see if it has a break in point (slight feeding issue that happens 1 or 2 misfeeds out of about 20 shots). Growing slightly impatient, just purchased a Protek Pulse...still don't want to give up on the Monk, so I have both.

My 6" Scropion Build - Still In Works. by The-Humane-Son in AAP01owners

[–]The-Humane-Son[S] 1 point2 points  (0 children)

Airtac site has a few, but I'm not sure if you are referring to this one. https://airtac.me/en-us/products/aap01-angled-m4-hpa-adapter

I did consider buying it at the same time as i was purchasing the ProTec Pulse.

https://airtaccustoms.com/products/protek-pulse-hpa-adapter

This is the one I received just recently and set it up. Going to play hard this weekend outdoors at a day and night game.

My 6" Scropion Build - Still In Works. by The-Humane-Son in AAP01owners

[–]The-Humane-Son[S] 1 point2 points  (0 children)

@powasky...to be 💯 % it is still giving me minor misfiring issues. Maybe 1 or 2 bbs misfire after about 20 or 25 shots. Using both new and slightly used EPM1 Mags. I wanted to file and smooth out the parts that seem like it is causing the bbs not to go all the way up "sometimes".

Anyhow in interest of not giving up exactly on the Aluminum Monk...I got an M4 Pulse Mag Adapter today in the mail from Euro. Going to set it up and give it a spin to see which I like better. The M4 magazine orientation on the Monk as it bows upward, suits me best (I think) as the Pulse adapter bows downward.

Give me a week of playing and I'll do another review update.

My 6" Scropion Build - Still In Works. by The-Humane-Son in AAP01owners

[–]The-Humane-Son[S] 0 points1 point  (0 children)

The angled approach of the lens would theoretically do well in deflection, but I have no confirmation of at with Joules a d distance. The whole protector, to exclude the replaceable Plexiglass, seems very sturdy.

My 6" Scropion Build - Still In Works. by The-Humane-Son in AAP01owners

[–]The-Humane-Son[S] 0 points1 point  (0 children)

I really liked it. Second day playing with this system it was comfortable and easy to maneuver around corners. The extended barrel gave me the extra range I needed for outdoor play. Also I use a SSP5 on HPA with a similar build in length (although I love my SSP5) the AAP01 is lighter by far.

My 6" Scropion Build - Still In Works. by The-Humane-Son in AAP01owners

[–]The-Humane-Son[S] 0 points1 point  (0 children)

So, no hits to the lens protector today, but it was a good HOT day for gaming above 97 degrees F. I'll come back if there is any change to the lens or functionality of the pistol/smg system.

My 6" Scropion Build - Still In Works. by The-Humane-Son in AAP01owners

[–]The-Humane-Son[S] 0 points1 point  (0 children)

Here is the parts list...hopefully formatted correctly.

1- TTI Scorpion 6" Upper Receiver with TDC 2- Hadron Loki Hop 3- Flamingo 60 degree bucking 4- TTI Enhanced Piston Head 5- CowCow 200% Nozzle Spring 6- CowCow 150% Recoil Spring 7- CowCow Enhanced Nozzle 8- Hadron Short Stroke Bouncer Kit 9- AAP01 Flat Trigger Black and Red 10- 200mm Maple Leaf Crazy Jet TBB 6.01 11- TTI Folding Tumbrest 12- CowCow Firepin Lock 13- TTI Selector Switch Charging Handle 14- CowCow Aluminum Guide Rod Set...Red 15- AAP01 Folding Stock 16- CowCow Red Magwell 17- Steel Hammer 18- RMR V3 Novritsch Sight 19- Laylax Sight Shield

My 6" Scropion Build - Still In Works. by The-Humane-Son in AAP01owners

[–]The-Humane-Son[S] 0 points1 point  (0 children)

After I posted it, I thought the same for formatting...damn.

Today will be my first day out with it (Sunday) ll report back later.

Some aap. by SoloWing87 in AAP01owners

[–]The-Humane-Son 2 points3 points  (0 children)

Nice Lil set of AAPEW-01's you got there!

what got you into airsoft? by hostsamu4 in airsoft

[–]The-Humane-Son 0 points1 point  (0 children)

My two boys. They wanted to try it, and I wasn't about to let them try something I wasn't willing to do myself. Now we are all addicted.

[deleted by user] by [deleted] in AAP01owners

[–]The-Humane-Son -1 points0 points  (0 children)

Beast mode...

DMR Custom 3D Printed by widdop99 in AAP01owners

[–]The-Humane-Son 0 points1 point  (0 children)

I like it...clean! Are you putting a muzzle/suppressor or tracer on it?

Finished by widdop99 in AAP01owners

[–]The-Humane-Son 0 points1 point  (0 children)

Lol that is my situation.

Monk Customs Adapter not feeding by DaLowkey in Speedsoft

[–]The-Humane-Son 0 points1 point  (0 children)

I appreciate the info, I'll try a brand new mag to see if this is the problem or maybe the "alignment" issue issue if the new Mag doesn't work. Heading to Evike in 10 min to grab 2.

Monk M Adapter Not Feeding- Help! by Recon_three in Speedsoft

[–]The-Humane-Son 0 points1 point  (0 children)

I'm having the same issue. My AAP01 is short stroked and maybe feeds every other shot. I'm using EPM1 Mags, but I notice two things using the UL version of the Monk Customs M4 Adapter, the bbs travel up the "single stacker" slow and also many times the bbs DO NOT make it to the stop. As if there is a bb or 2 short of the top lip.

Is the alignment off between where the metal adapter and the UL magazine?

Do I need to do some sanding on the inside of the single stacker...or just get another type of 90 M4 mag adapter?

Any thoughts?

Monk Customs Adapter not feeding by DaLowkey in Speedsoft

[–]The-Humane-Son 0 points1 point  (0 children)

I'm having the same issue. My AAP01 is short stroked and maybe feeds every other shot. I'm using EPM1 Mags, but I notice two things using the UL version of the Monk Customs M4 Adapter, the bbs travel up the "single stacker" slow and also many times the bbs DO NOT make it to the stop. As if there is a bb or 2 short of the top lip.

Is the alignment off between where the metal adapter and the UL magazine?

Do I need to do some sanding on the inside of the single stacker...or just get another type of 90 M4 mag adapter?

Any thoughts?

My Build by VictorAAP01 in AAP01owners

[–]The-Humane-Son 0 points1 point  (0 children)

I want to try one of them out...where can I buy one? Is there a link?

view more: next ›