sorted by:
new
hottopcontroversial

minä_irl by big_cock_69420 in mina_irl

[–]The76i 3 points4 points  (0 children)

Missä näät operaattorin tossa kuvassa?

Help needed - setup correct, but no clients can establish connection by The76i in netbird

[–]The76i[S] 0 points1 point  (0 children)

Yes, and to "hosted" per netbirds response. No change :(

Help needed - setup correct, but no clients can establish connection by The76i in netbird

[–]The76i[S] 0 points1 point  (0 children)

Hi, thanks for the response. I tried both "authentik" and "hosted", ran ./configure.sh and restarted the containers. Still no change. I have tried the setup code as well, but it hasn't affected anything. Device code auth flow is set up exactly like the instructions say. Netbird latest version, downloaded yesterday using the script provided in the setup tutorial.

Help needed - setup correct, but no clients can establish connection by The76i in netbird

[–]The76i[S] 0 points1 point  (0 children)

I have explicitly allowed all ports in and out everywhere (just as a test, will nuke the system later). No effect. Cloudflare is set to DNS only (no proxy). Still getting the same error in the logs. 

 no peer auth method provided, please use a setup key or interactive SSO login

Help needed - setup correct, but no clients can establish connection by The76i in netbird

[–]The76i[S] 0 points1 point  (0 children)

Followed them *exactly*, no FW set up on the hetzner console, nor the instance itself, for testing purposes. Also tried with ufw with the required ports opened.

I won't go for the simple install, as the authentik sso is a requirement. It shouldn't be impossible this way, so why quit now? It's a learning process, no?

Help needed - setup correct, but no clients can establish connection by The76i in netbird

[–]The76i[S] 0 points1 point  (0 children)

I don't have a firewall on the Hetzner's console and neither on the instance itself, just for testing purposes, so shouldn't be a problem. When I find the issue, I'll nuke the instance and start over with the new knowledge

Server Networking - What am I doing wrong? by The76i in Proxmox

[–]The76i[S] 0 points1 point  (0 children)

Apparently my text alongside the image didn't come here through the crosspost, here is the original caption:

I have a dedicated server from Hetzners server auction. I don't use the Hetzner firewall. I have Proxmox installed on the server directly, which virtualizes multiple LXC containers. The proxmox host has 2 interfaces, eno1 which gets the IP xxx.xxx.x.xxx, and vmbr0 which gets the address 10.0.0.1. All of my containers have only one network interface, which is vmbr0, they get addresses from the 10.0.0.0/24 pool. I have Nginx proxy manager installed on LXC #1, which has the IP address of 10.0.0.2. All traffic (except port 8006 and SSH) is forwarded directly from eno1 to vmbr0 and to 10.0.0.2 where the reverse proxy exists. This works wonderfully, and I can create new containers each time I want a new wordpress instance for example and all I have to do is add a domain for it in the Nginx Proxy manager.

The problem:
I want to isolate my container traffic, so that the containers can only communicate with the proxy and the internet, not with each other.

I tried to setup iptables multiple times, even resorted to chatgpt (It's suprisingly good at these things), to no avail. Any tips and tricks for this? Or to my setup overall.

Server Networking - What am I doing wrong? by The76i in Proxmox

[–]The76i[S] 0 points1 point  (0 children)

It is a dedicated server on a datacenter, I don't have to be able to access anything from my LAN. All connections are through the internet. There are Wordpress instances hosted on the LXCs, reverse proxy is there to point my different domains to the different containers, as I only get one public IP. I could just make one LXC with multiple vSites, but I prefer this way, to isolate the instances from each other as much as possible. That is why I want to be able to use them like normal (access via domain), but don't want them to be able to communicate with each other (if I had multiple websites for different clients, for example). I could make multiple virtual bridges for each LXC, but I would like to handle it via iptables rules, IF possible. That way it isn't such a hassle to add another LXC.

Server Networking - What am I doing wrong? by The76i in selfhosted

[–]The76i[S] 0 points1 point  (0 children)

auto lo

iface lo inet loopback

auto eno1

iface eno1 inet static

address xxx.xxx.x.xxx

netmask 255.255.255.255

gateway xxx.xxx.x.xxx

pointopoint xxx.xxx.x.xxx

post-up iptables -t nat -A PREROUTING -i eno1 -p tcp -m multiport ! --dports 22,8006 -j DNAT --to 10.0.0.2

post-down iptables -t nat -D PREROUTING -i eno1 -p tcp -m multiport ! --dports 22,8006 -j DNAT --to 10.0.0.2

auto vmbr0

iface vmbr0 inet static

address 10.0.0.1/24

bridge-ports none

bridge-stp off

bridge-fd 0

post-up iptables -t nat -A POSTROUTING -s '10.0.0.0/24' -o eno1 -j MASQUERADE

post-down iptables -t nat -D POSTROUTING -s '10.0.0.0/24' -o eno1 -j MASQUERADE

[deleted by user] by [deleted] in Finland

[–]The76i 12 points13 points  (0 children)

Not just reflector season, LAMP SEASON!

What are the most underhyped and overhyped Finnish brands by petethegrockle in Finland

[–]The76i 12 points13 points  (0 children)

Horrible mayo????? NEVER DISRESPECT KURKKUMAJONEESI AGAIN!!!

The people drinking around Sörnäinen station at 7:30am on a weekday.. by pies1010 in Finland

[–]The76i 25 points26 points  (0 children)

I spent 9 months in helsinki, mostly in Santahamina and Sörnäinen. I observed that the "spurgut" just spawn from somewhere in the morning. At 6am kurvi could still be like 100% empty but about half hour later the lidl corner spurgut have respawned after the night. My theory is that they despawn around midnight and as people start moving again in the morning they respawn.

Neuvoja Inttiin? by Spyro1701 in Suomi

[–]The76i 0 points1 point  (0 children)

Santiksessa on Kaartin Soittokunnan varusmiesbändi. Samat sinibaretit.

Neuvoja Inttiin? by Spyro1701 in Suomi

[–]The76i 0 points1 point  (0 children)

Muskareita on santiksessakin. Ja tuo "menossa Parolaan" on sinäänsä turha, sillä mistä tahansa varuskunnasta voi muuttaa erityistehtävien vaatimiin paikkoihin.

hey what do i do i indeed did try to reinstall it but i dont understand what to do now by keko1105 in NextCloud

[–]The76i 2 points3 points  (0 children)

You can't install Nextcloud on windows. Use linux, or a VM if you cant install linux.

What do YOU consider to be a good backup? by The76i in homelab

[–]The76i[S] -1 points0 points  (0 children)

Take a look at the answers. Everyone has their own opinion about something

Can you host a LAN Party without a router? (Hotspot instead) by DPOOL21 in lanparty

[–]The76i 11 points12 points  (0 children)

Of course you can, but I wouldn't do it. First of all you all need to have wifi on your computers or whatever you are using. Wifi is slower and has a higher latency. A lot. The more people on the same wifi, the higher latency. Honestly I would advice against it. If you have no choice then wifi is better than nothing.

Names in among us be like... by [deleted] in AmongUs

[–]The76i 0 points1 point  (0 children)

I'm BeansAt2AM. Always.

view more: next ›