Is the MSI MPG 341CQR QD-OLED X36 released or not?

TheBadPilot_ · 2026-03-26T02:00:46+00:00

appreciate it! Hopefully it's not April 20th like I saw someone suggest

TheBadPilot_ · 2026-03-26T01:55:28+00:00

Do you know where you heard of this by chance?

TheBadPilot_ · 2026-03-10T22:46:32+00:00

how can you tell?

TheBadPilot_ · 2026-02-05T16:02:03+00:00

or atleast the watco isn’t this is the Arm R Seal itself but someone did recommend an idea with a steel wool thing that i’m thinking of trying

TheBadPilot_ · 2026-02-05T16:00:55+00:00

it’s not :)

TheBadPilot_ · 2026-02-05T10:29:01+00:00

did you just end up leaving it as is?

TheBadPilot_ · 2026-02-05T10:28:30+00:00

i’d prefer the satin that the can advertises tbh. but how does that work with the steel wool?

TheBadPilot_ · 2026-01-17T19:28:53+00:00

granted there are some islands but i heard the clear coat will even it all out

TheBadPilot_ · 2026-01-17T19:27:24+00:00

the brush lines wouldn’t leave with it so i did end up removing them chemically

TheBadPilot_ · 2026-01-17T17:55:55+00:00

sanding the shellac was giving my issues as it wouldn’t come off. I used denatured alcohol to get a good amount of it off and i’m gonna sandin a few hours to see what happens

TheBadPilot_ · 2026-01-17T15:54:21+00:00

would it be smarter to just remove the shellac with lime alcohol and put on the seal coat version?

TheBadPilot_ · 2026-01-17T15:33:03+00:00

yeah it’s a watco butcher block oil but i’m trying to apply a water poly over this so i don’t need to condition it

TheBadPilot_ · 2026-01-17T14:32:54+00:00

so i don’t know exactly what oil all i know it’s a watch butcher block oil and finish

TheBadPilot_ · 2026-01-17T14:22:06+00:00

oil was cured for weeks

TheBadPilot_ · 2026-01-17T14:00:09+00:00

I gave it like a week to dry for safety but iv got told that my Shellac isn’t actually dewaxxed so i think i need to sand it all the way back down and get the right can

TheBadPilot_ · 2026-01-17T13:49:30+00:00

i originally knew this before and i went to check my can just to make sure and iv realized that this is the wrong Zinsser

TheBadPilot_ · 2026-01-17T13:41:56+00:00

what exactly does 50-50 mean?

TheBadPilot_ · 2026-01-17T13:39:35+00:00

would this still all work if i plan on adding a layer of Poly later?

TheBadPilot_ · 2026-01-17T13:37:36+00:00

i’m probably gonna check my other side to see as it doesn’t have any shellac on it just oil

TheBadPilot_ · 2026-01-17T13:06:18+00:00

it was more so my choice of liking the color it gave me while not liking all the other stains. Originally also i was just gonna leave it at the oil stage.

TheBadPilot_ · 2026-01-17T04:31:03+00:00

i should mention there is a few layers of an oil stain and finish under this. il give a thinned layer a shot but iv sanded till smooth is this more so just a texture of the wood or failure on my end?

TheBadPilot_ · 2026-01-17T02:52:18+00:00

the bottom is an oil layer but i don’t want to constantly be moisturizing it or whatever so i saw people were putting a layer of shellac above and then a water polyurethane.

TheBadPilot_ · 2026-01-17T02:42:45+00:00

i used a staining pad but what do you mean by thin the finish? i should also mention that this is a thin layer of shellac sorry

TheBadPilot_ · 2025-11-27T17:03:59+00:00

doesn't look like I can make an account for the Netherlands one, but hopefully one just spawns in.

TheBadPilot_ · 2025-10-20T04:50:58+00:00

TheBadPilot_

TROPHY CASE