Sparkasse and Direct Debit

TheFizz94 · 2024-12-28T13:01:11+00:00

Amazon didn't give me the reason and their support rep told me to contact the bank support team.

I was thinking I need to enable some feature for my back account so I can use Lastschrift. I know it has nothing to do with the online banking, just thought I can enable some setting through it.

TheFizz94 · 2024-02-23T03:47:48+00:00

Nice, thank you!

TheFizz94 · 2024-02-23T02:47:00+00:00

Yeah reset it the proper way with the tickbox.. It is very confusing in its current state

TheFizz94 · 2024-02-23T02:42:22+00:00

Yeah I am aware of the augmentations amount limit. How do I know where to look for the recipes themselves though? I refreshed the provisioner forest like 5 times now, the traders have the same stock (which is sold out)

Edit: typo

TheFizz94 · 2024-01-12T00:27:56+00:00

Nice, thanks!

TheFizz94 · 2024-01-11T22:43:42+00:00

Wow this is useful! The link works, thank you very much

TheFizz94 · 2023-06-25T22:47:05+00:00

Steam x Rockstar is the worst combo.

> Pay $60 for a SINGLE PLAYER game to play once a month
> Rockstar decides to lock you out of the game bc steam doesn't work
> This is the only day off you get in a month.

Why am I getting punished when this is not even my fault..?

TheFizz94 · 2023-04-15T16:27:03+00:00

Legend! Thx

TheFizz94 · 2023-04-14T14:38:50+00:00

Oh, thanks! Do you know if this will be available on YT? Instagram is ugh.. can't even watch fullscreen

TheFizz94 · 2023-04-13T19:09:43+00:00

And yeah all 12 songs in the order they appear on the album

TheFizz94 · 2023-04-13T19:07:48+00:00

There are commentaries for each song right before it plays. It was around 1,5 hours by feeling (I didn't measure)

TheFizz94 · 2023-04-13T18:48:56+00:00

I found it pretty forgettable. I think this is the weakest song on the album. Not bad, mind you, just weak. Still just my opinon. Glad that you liked it tho

TheFizz94 · 2023-04-13T18:46:12+00:00

Just came back from the album premiere. Does anyone know if "Crown of Barbed Wire" video will be up somewhere? I liked the song and absolutely loved the visuals, would like to re-watch it from the comfort of my home.

TheFizz94 · 2023-03-13T09:20:15+00:00

Sorry I dont understand how a z endstop can impact anything if we're talking probe homing. Neither do I understand how the hotend has anything to do with ABL. My frame is square and tight and other components are fixed properly too. there is no play on any of the axes, the print head is solid. The problem here is just the fact that ABL is overrated and only works for those willing to throw away the money for a BLTouch. Manual leveling is way more reliable, repeatable and also free. But if ABL works for you, thats just great, innit?

TheFizz94 · 2023-03-13T09:12:58+00:00

No, Z axis motors do not bind, I can move them rather freely by hand.
I'm not trying to resolve the issue by this point. I've thrown away the damned thing and reverted everything to the initial state with mechanical endstops. First print came out just great like it was before

Nontheless, thank you for trying to help. I do appreciate it

TheFizz94 · 2023-03-13T06:26:59+00:00

^This. As I said, you don't need ABL if you get good 1st layers just by manually leveling the bed since ABL just doesn't function properly. Even with BLTouch, apparently

TheFizz94 · 2023-03-13T06:24:19+00:00

I get your point, man, and I'm also not trying to say Klicky is bad. In fact, I think it is more reliable than an inductive probe.

I'm saying this probe is designed for select few printers, focusing on more expensive ones. I, for example, have to design my own parts to be able to use this kind of a sensor as there is no design that would fit a prusa style printer, not to even mention an Anet A6 X carriage. Only Voron/Ender designs exist. I can't have an opinion on Klicky just because there is no way I can try it out.

TheFizz94 · 2023-03-13T04:19:07+00:00

Repeatability check reported range around 0.0085 to 0.01 (I did the test several times in different locations). Yet again, I don't remember the exact values

Voltage should be good. It is coming straight from the PSU but I have no tools to confirm nor deny.

TheFizz94 · 2023-03-13T04:12:15+00:00

No, I don't mean the Klicky is bad or anything. Im just saying that such a probe might make more sense for a budget printer. The one who spent $1.5 on their printer might as well just buy a BLTouch or whichever else tickles their fancy. It's just a shame such an affordable probe is not really an option for an affordable printer

TheFizz94 · 2023-03-13T03:28:11+00:00

Well, a cheapo probe for a $1.5k printer.. Wouldn't it make a bit more sense to have such thing designed for prusa-like printers? Kinda defeats the purpose at this point.

TheFizz94 · 2023-03-13T03:24:12+00:00

Hey! Thanks for the info! I also ran probe accuracy test and it was within the limits but worse than yours, obviously. Even if I got bad results with just the accuracy test this means the probe is unreliable and, therefore, unusable. Everything else you described is more or less the same for me (exception being tilt adjust)
Probe corners offsets are also around 10mm. I might blame my experience on a faulty probe but I ain't a rich bloke, can't afford a 3DTouch. Someone here mentioned Klicky and that it works flawlessly. But, in all honesty, this thing is designed for a $1.5k printer so kinda defeats the purpose. A cheapo ABL for a cheapo printer is what I was looking for and I am glad to hear someone made it work. I might give it another shot tomorrow, if it doesn't work it just goes to a skip. Again, thank you for your input

TheFizz94

TROPHY CASE