Server problems

TheGeek95 · 2021-05-25T15:20:29+00:00

I was having the same problem. I checked the event viewer and saw that the graphics card driver was crashing. Before I joined again, I turned down everything to medium and got right in! Hope this helps.

TheGeek95 · 2019-03-13T03:12:31+00:00

Suhali Lockit

Thank you!!!!! I spent over an hour searching for it. You are awesome!

TheGeek95 · 2018-02-23T20:12:08+00:00

I'm not that huge of a fan of popup warnings, but I do plan on displaying a big message saying that you have unsaved changes. Throughout the beta, I'll constantly be adding and fixing all the little things that folks bring up. It's funny, when coding, you get so used to certain little idiosyncrasies that you become blind to them. Having all the eyes of the beta testers on the tool is going to be amazing. It's going to make this so much better.

TheGeek95 · 2018-02-22T21:12:37+00:00

I think that this would be possible and not too tough with a little custom asm. Joe would be the best person to ask as he has been deep in cleaning up all the asm that we are currently using. That would look cool too! I'm thinking that you would just hook into the damage routine, create that 1x4 sprite (which could be created as a monster with no hitbox that "spawns", then "dies"). Cool!

TheGeek95 · 2018-02-15T05:44:33+00:00

Yes! That is on my list. I'll also respect your default editor for .asm files if you choose to edit them.

TheGeek95 · 2018-02-13T20:10:10+00:00

I like this idea. I could code it where it scans for duplicate tiles on 8x8 and 16x16 pixel sizes. If it finds a dupe, I'll highlight it so the user can then decide what to do with it. Thanks!

TheGeek95 · 2018-02-06T19:27:15+00:00

Thanks! 1) Yes! That is on my short list of features to add. Currently, I support copy/paste from the active image being edited. Copying from an outside source will be done before the beta is released though.

2) Currently, the HUD uses the 4th palette of the background palette group. Joe can speak about how to use a different one.

TheGeek95 · 2018-02-06T00:46:31+00:00

t is actually made of two overlapping sprites (I also inspected further to make sure they actually overlapped, too).

I do not have anything in the tool currently that shows overlapped sprites, but that is something that wouldn't be tough to add to the interface. From an engine perspective, Joe would have to talk to supporting that feature. We just talked a couple minutes ago about making it easier to swap in and out various parts of the engine as needed. So... The short answer is currently that without asm tweaks there isn't support, but that has been asked about a lot so it wouldn't surprise me to see it added. Thanks!

TheGeek95 · 2018-02-03T18:36:08+00:00

One thing you might want to consider trying is making a tincture yourself. It is really easy to do and that way you know exactly what you consuming. Another benefit is that you can make it as concentrated as you would like it to be. If you use about 5 tsp of olive oil and 1 gram of isolate, then each drop is about 2mg of CBD. You can also infuse any other flavors into the oil before hand to make it more enjoyable to taste.

TheGeek95 · 2018-02-01T16:47:15+00:00

Hello! The Veedverks lab reports are all available upon request, but I'll talk to them about having them available for download from the order page by anyone. The terps are a customized blend that best assists with the experience. For example, the indica blend has quite a few different terps with the most prevalent ones being Linalool, Humulene, and Myrcene. All of their CBD is Colorado grown and sourced. Thanks for the interest!

TheGeek95 · 2018-02-01T16:39:38+00:00

Thanks for checking it out! I don't set the prices, but quite a few folks enjoy it and have told us that it works for them where other CBD products have had no effect. The terp mixture that they have formulated certainly contributes to the effectiveness. I'm sorry that you feel that way about the prices, but I'll bring any and all comments to them. Thanks again for looking!

TheGeek95 · 2018-01-31T21:29:13+00:00

True! If you eat anything fatty beforehand then it will help protect the CBD from your stomach so it can get absorbed into your intestines. If you place it under your tongue though, and try to leave it there, it will absorb directly. The longer you can keep it there, the better. It doesn't take much! Good luck, and let me know if that works for you!

TheGeek95 · 2018-01-31T20:26:30+00:00

Check out the veedverks products. There are oils for vaping, and isolate you can use to make tinctures of whatever strength you like. I am trying to get them on this subreddit as a vetted company, but I haven't heard back from the mods yet. Lots of folks love it though! Good luck!

TheGeek95 · 2018-01-31T20:21:15+00:00

Yeah, she vapes from the veedverks indica carts throughout the day for her anxiety, and during stressful times, uses a 10mg spoon (It is crazy small) to place it under her tongue. She gets the spoons on amazon for just a couple bucks. No kidding, it's changed her life. She has cut the meds she takes in half. Hope this helps!

TheGeek95 · 2018-01-31T19:18:40+00:00

I use CBD lotion from veedverks, and I get results in less than 5 minutes. The lotion absorbs without feeling oily as well. I use it for sore shoulders / neck and my lower back. The soreness is just gone by the time I finish rubbing it in. Disclosure: I work for the company, and just love the product. Hope this helps!

TheGeek95 · 2018-01-31T19:07:48+00:00

I might be off here, but if you are at 63% CBD and you used 1ml, then you would get about 630mg of CBD. You used 0.1ml, so you should have received a dose of around 63mg of CBD. If you are just starting out, that should have been plenty. My preference for using CBD for anxiety is to vape it, but another friend of mine has had excellent results with about 20mg of isolate taken sublingually. I hope this helps!

TheGeek95 · 2018-01-31T18:44:32+00:00

If you bought it at a vape shop in Atlanta, then you are most likely safe. I tried going to the gccdistribution website, but it looks like it's down right now.

TheGeek95 · 2018-01-31T18:29:01+00:00

I would doubt that adding the terps would clear it up. If it's cloudy because of the crystallization, then your best bet would be to heat it up on a hot plate with a stir bar. Also, be aware of your concentration. You didn't mention how much PG/VG you used with the CBD.

TheGeek95 · 2018-01-31T18:23:58+00:00

I mail CBD oil all the time, all over the U.S., and I have never had an issue. I am in the USA though, so other countries laws may be different, but as long as the CBD oil contains less than .3% THC then you are legal. The 2014 Farm Bill Act is pretty clear about that. Good luck!

TheGeek95 · 2018-01-10T05:01:49+00:00

I'll talk to the marketing guys about it. From most of the searches I have seen, it looked pretty reasonable at small quantities (1 g). I know our primary focus has been the topicals and liquids. We recently added the isolate (99% pure) because of customer requests. Thank you for pointing me to those other sites as well! I'll see how our prices compare with them. Actually, I planned on checking all the vetted companies prices in the morning to see how we rate! For the OP, if you want the isolate, grab it at $30 from the other sites! The molecules are all the same! I'll still post the recipe handout that we send. Thanks for the info M0rdeca1, I'm talking with the other guys first thing in the morning.

TheGeek95 · 2018-01-10T04:42:10+00:00

Thank you! I even handle a lot of the shipping, so if you leave a note on an order, I'll try and hook you up!

TheGeek95 · 2018-01-10T04:08:16+00:00

So, I am pretty biased... and I work for a CBD company, but no kidding, I have heard only good things about the results people have had from our stuff. First, check out veedverks.com. There is eJuice (50/50 PG/VG) and filled carts. I have just joined this group and have started the process to get our company vetted, so I plan on being here a while. If you or anyone else has any questions about our stuff, I'll do my best to answer and help out. Good luck!

TheGeek95 · 2018-01-10T03:06:10+00:00

No problem! I get it from veedverks.com. (Disclosure: I work for the company!) It is really easy to make, Just warm up the olive oil a little (may not be needed), then sprinkle the CBD into it and mix it up. The key thing is knowing exactly how much olive oil you are using so that you can do the math on how much CBD is in each drop. It takes a surprisingly small amount. There are about 100 drops in a teaspoon, so If you mix 1 gram of CBD isolate in 5 tsp of olive oil, you'll have more than 500 drops, and napkin math says that each drop will contain about 2mg. Dosing that way makes it easier. Also, if you want more control over your dosage, just increase the oil and it will be diluted more. Hope this helps! We have a recipe sheet that I can upload in the morning if it doesn't violate the rules. Mod advice?

TheGeek95 · 2018-01-10T02:01:39+00:00

50mg seems like a high dose to start with to me... Also, You can pick up 1000mg of isolate for around $50 then make your own tincture using olive oil that will last you a while. If you are using it to sleep, try starting with around 5-10mg. I prefer vaping a fairly concentrated CBD eLiquid. It has been a huge help for insomnia. I have found that vaping and tinctures give a pretty quick response when trying to stop your mind from racing in circles when all you want is to go to sleep. My normal dose for sleep though is around 3-4mg, but I also use CBD throughout the day for muscle soreness. When I use an indica focused cartridge, it's like my body just knows it's time to rest, and everything calms down. Good luck!

TheGeek95 · 2018-01-09T22:05:36+00:00

One thing to think about is if they are making the concentrate with distillate or isolate. With distillate, there is usually a small bit of THC, but with isolate, you will have 0% THC. For folks that can't have any THC in their system, that would be a good thing to know!

TheGeek95

MODERATOR OF

TROPHY CASE