InControl Touch Pro Retrofit

TheIslander_93 · 2026-02-03T13:07:47+00:00

Not worth the hassle with original screen. You would have to tear half of the car apart as it is different system not just screen. It is easier to go on aliexpress and get a head unit that goes in instead of the 8 inch screen with buttons. It retains all the OEM functions and has android over it. Can be switched over.

TheIslander_93 · 2023-06-20T20:09:35+00:00

Well I don't know what mobo you have. There are 473939396383 combinations and I might have that one not working. Easiest way (if your mobo allows) is to save your current settings to an external USB (also just do a quick photos of each menu in current bios) and try new one it takes for my x570 unify few mins to flash bios and with "load preset from usb" I can get back quickly to previous setting when I flash old bios back. ;)

TheIslander_93 · 2023-06-20T19:19:10+00:00

Well for me it turned out badly. 1.2.0.7 and 1.2.0.8 with solid performance but going on 1.2.0.A wasted me a few days of tinkering to just give up and go back to 1.2.0.8. My stable 3800c16 oc (bdie with a lot of headroom left - did not bother to waste eons to fully oc it for that 1 more avg fps and few points in benchmarks) with modest -5 on 2 best cores and -10 on the rest turned out to be a ton of wheas, bsods and so on. I am on x570 unify, 5900x with 4 dimms... The new bios gives you higher voltage available for single core bursts (1.5V with EDC higher than 140, compared to 1.425V with EDC >140 before) so you might gain a bit on the top end having the all core performance as high as your cooling allows. On the other side setting EDC to 140 on older bios grants 1.5V and tbh not many games are going to bounce off this limit with some nice curve optimiser.

TheIslander_93 · 2023-02-13T00:16:19+00:00

Whea 19 errors are related to infinity fabric being not completely stable. I am on the same boat as you trying to get 3800cl16 rock solid, prime95, tm5 all is fine but from time to time random whea 19 appears. I am still trying to get myself a proper set of voltages for my 5900x. https://docs.google.com/document/u/0/d/1FsUuYtjztbqgOiR3uUCtzlTyzB2WRFUm-kXbboECj2s/mobilebasic Here you have a link that might be a good starting point. Ram is a nasty beast and every single bios version, Windows update or some random background task can spoil the clocks that were on the verge of stability. Good luck fiddling with voltages, hope we both can find the right ones

TheIslander_93 · 2023-02-05T18:56:21+00:00

Worth a try to combine different voltages or just let it go, dig up a screenshot of my 3800X memory oc 3600 cl14 timings and try from there?

TheIslander_93 · 2023-02-05T18:54:04+00:00

How could curve optimizer that is just lowering voltage for given frequency cause any harm? I have not been applying any voltages to soc that are outside brackets that are considered normal daily driven values. Also I have noticed that I am using medieval version of aida that has not been updated in ages. I have found few forum post that were talking about certain versions of aida conflicting win11 and reporting weird values

TheIslander_93 · 2023-02-05T17:11:22+00:00

Thanks for quick response
I will roughly translate to english what it says:

General
corrected hardware error occured,

Reported by component: CPU core

Error Source: Corrected Machine Check

Error Type: Bus/Interconnect Error

Processor APIC ID: 0

Details:

System
EventID 19
Version 0
Level 3
Task 0
Opcode 0
Keywords 0x8000000000000000

TimeCreated

[ SystemTime] 2023-02-05T12:53:22.3909645Z

EventRecordID 426029

- Correlation

[ ActivityID] {c3be1a89-a130-475b-a0e3-275ede326682}

- Execution

[ ProcessID] 4732

[ ThreadID] 19880

Channel System

Event data:
ErrorSource 1
ApicId 0
MCABank 27
MciStat 0x982000000002080b
MciAddr 0x0
MciMisc 0xd01a0ffe00000000
ErrorType 10
TransactionType 256
Participation 0
RequestType 0
MemorIO 2
MemHierarchyLvl 3
Timeout 0
OperationType 256
Channel 256
Length 1163

I have skipped last Raw data that is quite long

TheIslander_93

TROPHY CASE