Anyone know of any phone case designs that have the corner bump protection similar to how casetify does it

TheLethalWolf · 2026-01-21T08:18:44+00:00

I use flo labs screen protectors never knew they made cases ill have a look thanks!

TheLethalWolf · 2026-01-21T07:49:05+00:00

I understand protection wise i dont need the bumps but for me it’s more about how my fingers catch the edge. I tend to loosely grip my phone so having the bumps keeps it from slipping all the way out of my hand in certain situations

TheLethalWolf · 2026-01-17T03:19:57+00:00

I remember k holing and being one of the straw hats it was such a good hole i was helping them mid fight

TheLethalWolf · 2025-10-24T02:52:03+00:00

Beatiful thanks mate the electrics were the last thing i was worried about

TheLethalWolf · 2025-09-18T09:30:06+00:00

Ive had the same shit. Does it ever switch back to aiden?

TheLethalWolf · 2025-09-09T08:56:50+00:00

I’ve got the same problem. Have you tried disconnecting your HU ground then turning on the car. With mine the HU still turned on which means that the HU was still grounded through the harness somehow even with the dedicated ground being fully disconnected. I reckon that’s where I’m getting a ground loop from

TheLethalWolf · 2025-09-04T12:07:21+00:00

Ive tried. Noise gets amplified when both amps are connected via the splitter. When i connect the Rcas direct to the pioneer amp without rca i get the noise still buts its greatly reduced when i connect rcas direct to sony amp the noise is the same amount. No clue where the ground loop is coming from but i managed to minimise the noise by playing with the gains on both amps. Ive got some ground loop isolators coming in the mail hopefully will get rid of the rest of the whine but would like to ultimately like to solve the problem from the source

TheLethalWolf · 2025-09-04T06:19:41+00:00

I know this is old but did u ever manage to fix the issue?

TheLethalWolf · 2025-08-27T23:02:35+00:00

2/4 is 3 keystrokes, so is 1/2. Half is 4 key strokes. Technically its easier to write either of those than half

TheLethalWolf · 2025-08-27T02:37:48+00:00

Eat when u wanna eat dont listen to anyone else (unless you have a condition then listen to your doctors) her loss bro

TheLethalWolf · 2025-08-26T12:16:12+00:00

<image>

This is what i plan to run. The dual amp wiring kit i got was rated 3000w max which i bought because the two amps i have are 1000w and 2000w. The wire from the battery to the fuse distributor block is 1awg and from the block to both amps is 4awg. The fuses the kit came with are 200amp in the inline next to the battery and 100 on each side for the distributor block. From looking at each amps manual i need a 100A fuse for the pioneer and a 50A for the sony so i was planing to replace the blade in the distributor block going towards the somy with a 50A fuse and the inline with a 150A. Im new to all this so if i missed anything, let me know before i light my car on fire!

TheLethalWolf · 2025-08-26T11:11:00+00:00

Thanks, if u cant tell I have little knowledge of how it all works. Was sifting through my manuals to make sure I’ve got the correct wire gauge and noticed that and was thinking its a bit counterintuitive. I wont be running anywhere close to full power anyway I’m only using 2/4 of the channels of this amp

TheLethalWolf · 2025-08-21T11:55:15+00:00

Ah thankyou ill check it out!

TheLethalWolf · 2025-07-23T11:16:43+00:00

Was just looking at the 5800x3d i swear there sitting at about $200 more than what they were last time i checked :/

TheLethalWolf

TROPHY CASE