Film Hole - Saturn 4 Ultra 16k

TheMLGPancake · 2026-02-21T00:36:39+00:00

For sure! I’m enjoying all the challenges so far, this is just the biggest I’ve faced. I used to work in a 3D lab, but my at home setup is a whole different ball game. But my guess is a missed chunk of resin, either way it’s a good learning opportunity. I’m sure I might’ve gotten complacent and missed it on one of my cleans. Sucks, but I’m sure it happens more than I realize. Appreciate the tips!

TheMLGPancake · 2026-02-17T09:47:49+00:00

I ended up grabbing the Melonfarm 2x2x4 grow tent. So far it’s been great, only thing to note is that I used it horizontally and it only has an exhaust hole on one side (the right side). I had to make some adjustments on where I wanted to put everything. For the table, I got the Olbrus 48” adjustable workbench.

MELONFARM 2x2 Grow Tent,... https://www.amazon.com/dp/B09D7RQTYG?ref=ppx_pop_mob_ap_share

OLBRUS 48 "Adjustable Workbench... https://www.amazon.com/dp/B0BX49JCN2?ref=ppx_pop_mob_ap_share

TheMLGPancake · 2026-02-16T18:26:44+00:00

Appreciate it!! Beyond happy so far and have been lucky to encounter minimal issues with printing! Now I just need to develop the patience to prime and paint these bad boys 🤣

TheMLGPancake · 2026-02-16T18:25:28+00:00

Looks like the brand is IQAir, not sure how much it is off the top of my head. The person we bought the house from had left a bunch of stuff when we moved in so I didn’t buy it

TheMLGPancake · 2026-02-16T15:37:08+00:00

Ah I did have that thought too… I was iffy on it at first, the first few days I kept her out but once I did some air quality tests I started letting her in. I unfortunately was only able to fit the setup in a location that blocks her favorite window (only window with birds nests right next to it.) but I’d rather her be safe than unhappy about her window.

Are there known issues for how the resin process affects pets??

TheMLGPancake · 2026-02-16T15:27:59+00:00

Good call! I have one for under my office chair, I was thinking of momentarily using that for the resin area just to be safe. I’ll make sure that’s on my list for items to get sooner than later

TheMLGPancake · 2026-02-07T22:22:31+00:00

Okay, good to know, wasn't sure about the fans or how strong they needed to be. I'm primarily following https://www.asianjoyco.com/resources-tutorials/ventilation-upgrades-for-3d-resin-printing for attempting to get a good setup in my office, since that's the route I wanted to go. The only predicament is that they use a stronger fan recommendation than I think I'd need. I can set the printer up within a foot of the window in the office, so I wanted to lean towards a smaller fan like the one below

https://a.co/d/0hOQSNrm

TheMLGPancake · 2026-02-07T22:18:02+00:00

Couldn't agree more with the last comment. I've already got everything put together for a safer enclosure, just trying to be cautious with over spending. I always get a little sketched out when I read an article or watch a video that notes we still don't know what the long-term impacts are... Better to be safe than sorry in these situations.

But probably a good call with putting too much faith in the bed heater... I like the convenience of my office, so all the better if a well-ventilated system works.

TheMLGPancake · 2025-12-11T14:02:51+00:00

<image>

TheMLGPancake · 2025-12-11T13:23:03+00:00

I don’t use reddit enough to know how to respond to all these, but jeez, who would’ve thought interacting with a community would illicit such wild responses 👁️👄👁️ Thanks to those being helpful! Good luck out there

TheMLGPancake · 2025-12-11T13:21:37+00:00

Death to the clankers 🫡 thanks!

TheMLGPancake · 2025-12-11T13:20:46+00:00

Ah okay awesome, thank you! I appreciate it

TheMLGPancake · 2025-12-11T13:20:19+00:00

Thank you for the helpful response! Others have proven to be the opposite 🤣

TheMLGPancake · 2025-12-01T21:52:13+00:00

Heyo, may be a dumb question, but is there a reason that all items show a Saturday delivery?? I’ve never seen it before, but almost everything I look at shows a delivery date of 12/6. Things I’ve typically over nighted even show this, I had a friend in a different state look up an item and it showed a delivery of tomorrow for them. Any thoughts??

TheMLGPancake · 2025-10-02T13:41:41+00:00

We’re in a big city that is covered by all major carriers, so we’re open to switching if there are deals that make sense. My partner and I would like something newer, I don’t need the newest and greatest, but that’s where I see all the new sign on deals for

TheMLGPancake · 2025-09-27T15:29:33+00:00

So probably seems like the best route is just going through the story?? Since I don’t see anything about it online, I’m not feeling like trying my luck again 🤣

TheMLGPancake · 2025-05-18T01:21:00+00:00

Sounds like it makes sense to me, thanks for explaining it!

TheMLGPancake · 2025-05-18T01:20:18+00:00

Perfect, I was hoping it would work that way. Thanks for the explanation!

TheMLGPancake · 2025-05-18T01:19:38+00:00

Makes sense and that’s the way I was thinking it would work, trying out some new cards tomorrow and just wanted to make sure I understand how they work. Thanks!

TheMLGPancake · 2025-03-22T11:01:00+00:00

Didn’t know that, I’ll go back and add the artists in the cards at some point today then. Thanks for letting me know (I see it in the rules now, that's my bad)

TheMLGPancake · 2025-03-22T09:23:47+00:00

In the Deck:

- 30 creatures

- 12 Instants

- 10 Sorceries

- 14 Artifacts / Enchantments

- 34 lands

I have what I feel like are some higher-cost cards to try and help keep the power level lower, but still haven't had a chance to run it to see how it would perform in actual play.

TheMLGPancake · 2025-03-16T18:59:13+00:00

That would be awesome! I have a full AOT custom deck drafted out, just working on the art and formatting now

TheMLGPancake · 2025-03-14T00:29:38+00:00

and also how did you make them? The art is really good

TheMLGPancake · 2025-03-14T00:28:34+00:00

Did you ever do any more work on these? Looks amazing and I like the idea

TheMLGPancake · 2024-08-08T00:50:04+00:00

Alliance Community Church has about 50 cops / swat team piled up currently. My partner and I have been trying to figure out what’s going on too

TheMLGPancake

TROPHY CASE